|
|
|
Panels fitted with holes for air flow.
|
|
STEPBLOC
Slip-resistant serrated surface with raised perforations.
The upwards-perforated surface with its non-slip design provides a surface which gives superior grip properties that offers the highest safety. The oval-shaped openings permit liquids to run off easily, these openings provide a 37% open area and are sized to prevent a 15mm diameter ball passing through the openings.
Webforge supplies STEPBLOC manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.790m.
|
|
STEPCLAIR
Slip-resistant surface with both upward and downward facing holes.
The downward-perforated holes have a diameter of 18mm, whilst the upward-perforated holes have a diameter of 4.5mm, creating a plank with a 30% open area and aperature sizes that prevent a 20mm diameter ball passing through the openings.
The interplay between the prominent and recessed openings provides a secure foothold and at the same time allows liquids to drain freely off the surface. The STEPCLAIR profile is less aggressive than the STEPBLOC profile and has the advantage of allowing wheeled trollies to be pushed across its surface.
Webforge supplies STEPCLAIR manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.760m.
|
|
ASM's Accel-Air die-cast aluminum air flow grate is our latest addition. With its 56% free open area, it is the best air flow panel in the industry when it comes to moving air. Made from high quality aluminum, it is available in a raw
casting or powder coated epoxy finish. The Accel-Air Grate is the best solution for creating "cold" aisles for your server and equipment rooms to ensure no
overheating.
|
|
| ... products without information |
| |
Core composed by 3 layers of glass 10 mm thk. and an
interposed layer of transparent or opaline pvb
Edge trim in PVC 1mm thk. transparent
Dimensions 600 x 600 x 30 mm
|
|
Traction Control Frit for Glass Flooring
Traction control flooring is made using a self-texturing enamel permanently fused to the glass surface. The coating provides aggressive traction properties to the glass surface and results in a superior slip coefficient as a safety feature for glass flooring. TC Frit can be applied to many different thicknesses of glass as well as to combinations of thicknesses laminated together to satisfy weight or building code requirements. This product is offered in standard or custom patterns to give flexibility to the degree of translucency and traction control required.
|
|
| ... products without information |
| |
|
The Type BVH Maxi and BVHS floor access panels feature a 10.2 cm deep pan cover designed to accept a wide variety of flooring materials. The panel is available with reinforcing for 125 kN, 250 kN, and 400 kN test loads (per EN 124)and in steel and stainless steel construction.
|
|
Expanded polystyrene panel of strong density on right board. This PSE is of color silver plated gray.
Panel in PSE of strong density on right, gray board silver plated. EPSISOL gets busy for the insulation of the grounds of the apartment buildings, tertiary sectors and of the establishments receiving of the public. It is intended for the thermo isolation:
- under-face of the quay levels of houses,
- under cover of the floors located in top of basement, on underfloor space, external passage or quay level,
- floors (low or intermediaries) heating with warm water low temperature, reversible and radiant electric.
|
|
|
|
|
|
Springvale Floorshield has been providing the effective, efficient and cost-effective solution to insulating a wide variety of solid and suspended floor constructions for decades, making substantial contributions to energy efficiency.
An expanded polystyrene rigid insulation board, it is available in original white EPS or as Platinum, to provide even higher insulation values.
Platinum Floorshield is an EPS board which incorporates a graphite component called Neopor®, manufactured by BASF, to provide significantly improved thermal insulation performance, for example, to achieve higher levels of the Code for Sustainable Homes or just to improve SAP ratings.
Floorshield products are light and easy-to-handle and can be fitted simply in domestic, commercial and industrial ground floor applications. Floorshield is suitable for use in solid concrete floors above or below the ground bearing slab; above a suspended beam and block floor; within a suspended timber floor and below under floor heating systems.
The inherent insulation and compressive strength properties of this versatile material make it the most cost-effective loadbearing insulant for floor construction, with a compressive strength at 1% compression of 21 kPa. Springvale Floorshield products are the ideal solution for domestic applications.
Providing excellent thermal insulation properties, Floorshield and Platinum Floorshield reduce heat loss, conserve energy and can be used in conjunction with other products in Springvale%u2019s Shield range to assist compliance with the Code for Sustainable Homes.
|
|
UNIMAT%u2122 Sol Ultra 4FA62 is a panel of PSE-Graphite%u2122 Neopor® on board rabbets.
It is particularly intended for the insulation of the heating grounds (electric, with water circulation and reversible).
|
|
|
The pressed Dämmplatte from Steinwolle with special fiber adjustment and intensified connection is moved for middle loads under swimming being subject grounds.
|
|
|
A special fiber adjustment with intensified connection makes the Dämmplatte 341 particularly resistant.
|
|
|
|
|
|
EUROSOL Thermo isolation of the floors
SCOPE OF APPLICATION: System of heat insulation used, in new work and rehabilitations, for all the types of existing floors on the market, including for all the systems of heating (hot water - electric floor radiating) and of cooling by the ground.
FEATURES: The EUROSOL is a panel of heat insulation out of rigid polyurethane foam (PURE) manufactured without CFC nor HCF, faced of a watertight facing composite polyethylene, aluminum and kraft on the two faces. A face receives a black squaring with the step of 10 cm.
Dimensions of the panels:
Matched grooved edges: 1000 X 1200 mm useful 990 X 1190 mm
Thicknesses: 30,41,51,56,63,80 Misters.
Density of foam: density 30 kg/m3 ± 2.
Classify compressibility: European classification SC1 has 2 Ch
Thermal coefficient of conductivity certified: 0,024 W/m.K
ACERMI N° 03/003/281 Classification INSULATES: I5 S1 O2 L2 E1
The floors isolated with EUROSOL can receive a stuck floor covering (on cover concrete), seal or a floating hardwood floor.
|
|
JACKODUR® KF Standard is a high-quality thermal insulation in extruded polystyrene foam (XPS). It is particularly suitable for basement / perimeter applications as it is compression proof, dimensionally stable, moisture and rot resistant. It can therefore also be used in standing water and as load-bearing foundation slabs.
JACKODUR® KF Standard thermal insulation for basement/perimeter is available in a number of different variations:
* compressive strengths 300 kPa / 500 kPa / 700 kPa
* smooth, extrusion-compressed surface
* edge profiles: shiplap (SF), butt edge (GL) or tongue and groove (NF)
* thickness between 30 and 320 mm depending on the format desired
* surface area covered depends on format, e.g. 1250x600 mm = 0.75 m² or 2500 x 600 mm = 1.5 m²
|
|
High performance rigid extruded polystyrene insulation - thermal conductivity 0.029-0.036 W/mK
High compressive strength - available in a number of grades to suit application
No requirement for a separate vapour control layer
When used beneath floor slab, provides a smooth stable platform for the DPM
CFC/HCFC-free with zero Ozone Depletion Potential (ODP)
|
|
Premium performance rigid phenolic insulation -
thermal conductivity 0.021-0.024 W/mK.
Negligible smoke obscuration.
Class O / low risk fire rating.
No requirement for a vapour control layer.
Quick response floor heating - prevents heat loss through "heat sump".
Minimises the cost of related items %u2013 soil removal, DPMs, service connections.
|
|
High performance rigid urethane insulation - thermal conductivity 0.022 - 0.023 W/mK
No requirement for a vapour control layer
Quick response floor heating - prevents heat loss through "heat sump"
Minimises the cost of related items - soil removal, DPM's, service connections
|
|
High performance rigid extruded polystyrene insulation - thermal conductivity 0.029 W/mK bonded to T & G chipboard
No requirement for a vapour control layer
Eliminates the need for wet screeds
Excellent compressive strength
|
|
|
|
|
|
The JACKODUR Atlas perimeter insulation system combines all the qualities expected of modern thermal insulation for use in passive-house design:
* Free from thermal bridges – Unlike standard construction work, where thermal bridges are usually suitable, thermal bridges are not acceptable in passive-house constructions. A thermal bridge is considered to be insignificant when Ψ ≤ 0.01 W/(m-K). JACKODUR Atlas is fully compliant with this requirement.
* Cost effectiveness – It combines thermal insulation with a formwork system, so that both are achieved in a single step. Stripping the formwork is not necessary. And this, together with the single-layer application, means significant time – and therefore cost – savings.
* Structural physics under control – Thanks to its unique connection system (patent pending), laying mistakes, and therefore thermal bridges, are eliminated, and a structurally correct single-layer application is guaranteed.
* Durable and secure – The tried-and-tested JACKODUR base material ensures that your building is durably insulated with secure foundations.
* Depending on the format desired, JACKODUR Atlas is available in 300, 500 or 700 kPa
JACKODUR Atlas is available as a complete system:
* made to measure according to your architect’s specifications
* essentially all geometries can be produced
* complete system delivered directly to the building site
* precisely tailored construction simply by following the detailed laying instructions supplied
* eliminates the need to adjust or cut to size
Alternatively, the elements can be assembled individually.
|
|
|
|