|
|
|
|
|
|
Savour comfort when walking
The ultimate underfoot experience with NORTEC raised floor panels made of calcium sulphate (gypsum fibre) - a non-combustible material with excellent structural and physical properties.
NORTEC floors offer an exceptional range of benefits:
* Extreme strength
* Highest quality from raw material to the finished panel
* Highly effective sound-proofing
* Calcium sulphate panels are virtually emission-free (Institute for
Construction Biology in Rosenheim)
* Many options for combining with other flooring systems
* Unique appearance, available in factory-bonded stone or parquet or a
standard floor covering, such as rubber, PVC, HPL or carpet.
Looking for a state-of-the-art product with outstanding properties? Then NORTEC is the right product for you.
NORTEC raised floors and the Lindner dry flooring system FLOOR and more® are available as "FLOOR and more® sonic" offering ventilation and outstanding acoustics, "FLOOR and more® power" which withstands particularly arduous loads and "FLOOR and more® comfort" which integrates heating and cooling technology.
|
|
|
|
|
|
Ready for anything
A flooring system that adapts to your needs - ideal for entrance areas and atria, as well as offices and industrial plants.
FLOOR and more® is an interlocking tongue and groove hollow floor system, which can be used within 24 hours of installation and which can be finished with any conventional floor covering of your choice! Factory-application of the flooring ensures shorter construction and drying times. Select from stone finishes, parquet flooring and much more.
FLOOR and more® is also available in different options to suit your project needs:
* FLOOR and more® comfort: with integral underfloor heating for excellent
comfort and exceptional efficiency.
* FLOOR and more® sonic: with sound-proofing. Perforations in the floor
panels guarantee not only air ventilation but also outstanding sound-
proofing.
* FLOOR and more® power: a heavy-duty floor system, perfect for
production plants - but also ideal for showrooms, museums and libraries.
* FLOOR and more® hydro: water-repellent, specially-treated hydrophobic
panel. The surface as well as the entire floor panel is treated in this way.
Functional but also aesthetic: Lindner engineers find solutions for even the most unusual projects.
|
|
SISTEMA MEN has perfected its raised flooring system for commercial and business spaces.
Structure
Screwing the panels into designated spaces instead of just laying them into an under structure assures:
-stability and durability
-noise reduction
-hermetic seal against water and washing detergents
-automatic grounding for all elements
-no static electricity produced from tread
Elements
Panels are made of metal sheets combined with cement and a perimeter of steel thaat are fused together.
'Nude Version'
SISTEMA MEN loose lay flooring is also available in a 'nude' version with rough zinc panels ready for any loose lay finishes.
Dimensions
Panel dimension: edges 600 x 600 mm +/- 0,1mm
Squareness diagonal: 848,5 mm +/- 0,1 mm
Thickness: 32 mm
Panel weight: Kg 18
|
|
The first modular raised floor heating, with removable panels. The possibility of inspecting any component of the installation is combined with the greatest comfort of a panel heating. This kind of modular raised floor heats any room through a low temperature system installed in every module Electrical and network cables can be easily reached in the hollow space of the flooring. The full working of the system is very fast due to the small thickness of the eating module, which gives more flexibility to its functions. With the new modular raised floor heating, it is possible to match the expectations of flexibility and the quality of the office life.
Planium srl, manufacturer of modular flooring surfaces and personalised solutions for architectural and contract design, has developed with Eurotherm spa, leading company in raised floor heating systems, the new modular raised floor heating system.
|
|
Current need to inspect and distribute utility systems make raised floors the most suitable.
These can be made using porcelain stoneware, marbles, granites, laminates, woods, PVC, rubber.
|
|
|
|
|
|
Kingspan is the largest access floor manufacturer in the world and is market leader in the USA, the UK and Ireland.
As the leading innovator and supplier of raised access floors, these products are installed in most major projects worldwide.
The main markets for access floors are in high-rise office developments, call centres, web farms, retail developments and air traffic control centres.
Competitive strengths:
Strong World market leader
Superior technical capability
Capacity and resources to manage major projects
Markets served:
High rise office developments and call centres are the main market for raised access floors. The four manufacturing plants, two in the USA, two in the UK, and a large number of sales offices enable Kingspan to efficiently serve the worldwide market
The modern office environment is constantly evolving and in order to compete in the global marketplace, changes and churn rates are increasingly high. .
Buildings need to be safely adaptable with minimum disruption.
Adapting to constant change, requires buildings designed not only for today, but for the future.
Kingspan's Building Technology Platform® provides a fully accessible interstitial space to house critical services such as power, voice, data, heating, ventilation and cooling systems. Fully integrating with building design and internal architecture, Kingspan facilitates quicker occupancy compared to traditional service distribution systems.
|
|
|
Problems related to the incompatibility between traditional building structures, conceived as to remain unaltered in time, and technical wiring, which need to be changed continously and adapted to user new necessities, are extremely important in buildings provided with high technological environments. In the beginning, access floors had been projected only to solve problems of plant engineering in data processing centres. Today, access floors are the best solution for many other projects where technical flexibility is required.
|
|
|
Problems related to the incompatibility between traditional building structures, conceived as to remain unaltered in time, and technical wiring, which need to be changed continously and adapted to user new necessities, are extremely important in buildings provided with high technological environments. In the beginning, access floors had been projected only to solve problems of plant engineering in data processing centres. Today, access floors are the best solution for many other projects where technical flexibility is required.
|
|
|
|
|
|
The Flushglaze fixed flat glass skylight can be tailored to meet many shapes and sizes from square, rectangular, triangular and a recently completed tear drop shaped Glazing Vision will identify and design the rooflight to meet your needs. The Flushglaze is a very low profile system based on car windscreen technology, the glass being structurally bonded and triple sealed making it ideal for flat roof applications on a pitch of only 3-5 degrees. This reduces water ponding and condensation risks to a minimum by the elimination of internal flashings and metal framework and can be installed on flat or sloped roof applications. The rooflight can be extended to any length like ribbon glazing by linking sections either with glass to glass silicone seals, back to back angles or glass fins. Opening sections can also be incorporated into the Flushglaze using our Visionvent rooflight Standard and bespoke sizes are available, stock rooflights are offered on a next day delivery basis.
Type: Flushglaze Walk on range
Glazing Details: 43.5mm Double glazed units comprising 21.5mm clear toughened laminated outer pane, 16mm airspace and 6mm clear toughened low E inner pane. Units to have silicone edge seal.
Frame: Extruded aluminium cill profile, grade 6063 T6
Finish: Polyester Powder Coated.
Colour: White RAL9010 matt or RAL7015 matt as standard.
Kerb: 75mm wide up-stand to all sides as manufacturers recommendation. Minimum 3 degrees fall.
Other requirements: External glazing surfaces to be flush with no flashings or water ponding obstructions/dirt traps on the glass surface
|
|
1 Core
38 mm thk. high density chipboard 720 kg/mc, mixed with thermosetting resin, low emission E1 class as per EN312-1 norm
2 Edge
trim 0,5 mm thk. no-creak self-estinguishing plastic band
3 Top covering
Parquet
4 Bottom covering
T38AAP: 0,05 mm. pvc protected no-scratch and no-rip aluminium foil to provides an optimal barrier to the moisture and improved the electrical conductivity
T38ATP: fi nished by steel tray 0,5 mm thk. to provide a proper isolation to the moisture and improve the mechanical performance and the electrical conductivity
Dimensions 600 x 600 x 38 mm + top covering thk.
|
|
1 Core
28/30/34 mm thk. high density calcium sulphate =1450 kg/m3, reinforced by cellulosic
organic fi bres , class "0" of reaction to fi re, according to International standards
2 Edge trim
0,8-1,2 mm thk., no-creak, self-estinguishing plastic band, black/grey colour
3 Top covering
ceramic grés
4 Bottom covering
G28/30/34HAK: 0,05 mm pvc protected no-scratch and no-rip aluminium foil to provides an optimal barrier to the moisture and improved the electrical conductivity
G28/30/34HTK: fi nished by steel tray 0,5 mm thk. to provide a proper isolation to the moisture and improve the mechanical performance and the electrical conductivity
Dimensions 600 x 600 x 28/30/34 mm + top covering thk.
|
|
Inert panel, totally fireproof and waterproof, the ideal reply to all the particular conditions of installation that until now were meeting a large range of problems caused by the incompatibility between the room’s conditions and the raised floor composed basically by wooden chipboard or calcium’s sulphate.
Perfect to be finished with ceramic.
Ideal for internal use, excellent for the external use.
1. totally water proof
2. totally fire resistant
3. resistant, high density (>2000 kg/m2)
4. high mecanical resistance (> 600kg)
5. high dimensional stability
6. no breaking
X floor is finished on top with ceramic or natural/artificial stone. The thickness is 26 mm.
Optimal for the internal use (solucion edge trimmed on perimeter) and fort the external use (solucion with no edge trim)
|
|
|
|
|
|
Previously to lay floor tiles on terraces was a problem. Infiltrations were everyday occurances because of structural adjustment, temperature changes, under-tiles layers. Nowadays there is Grintec®, the raised flooring system for outdoor areas which eliminates every inconvenience: the modular panels, which the floor is composed of, are placed on special plastic material supports that raise them from the underlaying waterproof layer. The Grintec® system was conceived by Intec design creativity and technological research. Each panel is composed of a structure made of composite material, with inner steel reinforcement to guarantee the requested load bearing, and of a Porcelain Stoneware top finish.
Grintec® can easily be laid with dry installation procedure in every season and the blanket can be checked.
The air chamber between the underside of the panel and the slab permits a better thermic proofing.
Grintec® can absorb the slab expansion due to the temperature range.
The slight room among the panels allows water to flow quickly away.
|
|
Slip-resistant surface with both upward and downward facing holes
The downward-perforated holes have a diameter of 8 mm, whilst the upward-perforated holes have a diameter of 4.5 mm.
You can use STEPHUIT® particularly as gangways and stairs in industrial and public areas, for example at administration buildings, schools or in stadions.
|
|
|
|
|
|
The TK SOFT solution is the only patented system with certified performance which drastically reduces the impact noise transmitted from one floor to another.
Our solution means that noise levels considerably lower than those required by law can be achieved thus combining the advantages of a raised floor system with those of noise insulation: another Teknofloor® breakthrough.
In Italy legislation on permissible noise levels states that in this field the framework law no.447 dated 26 October 1995 applies. This law establishes the sphere of jurisdiction of the State, Regional authorities, Provincial authorities and Municipalities, introducing plans for acoustic remediation and supplying dispositions on the matter of acoustic impact.Law no. 447 "Passive acoustic requisites for buildings" Ministerial Decree 5/12/1997 indicates the maximum limits for the level of impact noise transmitted (L'nw):
Type of building
L'nwResidential, Hotels 63 dB
Hospitals, nursing homes, schools 58 dB
Offices, places of worship, commercial premises 55 dB
The law lays down that the impact noise perceived one floor away must not exceed a certain level. It is therefore clear how important the observance of such requisite is, both to avoid economic damage and to guarantee maximum comfort to the future occupants.For example, in the case of offices, with a floor 20 + 4 cm high in a clay /cement mix (300 kg/m2) a foreseen noise level of 77 dB is established: our system permits a reduction of 33-35 dB, to achieve a transmitted value of approximately 42-44 dB: absolutely superior performance compared to traditional systems.
|
|
PARQUET
Wood is a warm and elegant material, suitable for head management premises with a medium level of transit; subject by nature to variations in size and colour depending on the environmental conditions.
All the parquet panels are treated in the factory with special transparent, high-resistance glazes.Available in different wood species and sizes.
|
|
The 60x60
is dying out
Our machines enable us to produce floors with panels of any size from 30cm to 120 cm per side, thus allowing you to look beyond the classic 60x60.
This means that we can combine our product with all the existing types of finish, especially those usually confined to the traditional flooring area.
Whatever finish you want for your floor, and whatever size it is, Teknofloor® can make it, enabling you to apply the traditional appearance of normal floors to your raised floor system, tickling the imagination of designers and giving them potentially infinite decorative possibilities.
|
|
The main elements of the system are divided in:
- Structure, composed by different elements in charge to sustain
the pavement and to equip it with the necessary height and rigidity marked in project.
- Panel, like component that contains coating in its face
superior and that as it leaves from the system will contribute of decisive way
in aspects how the acoustics, characteristics in front of the fire, resistance
mechanics and electrical characteristics of the system.
Description:
- PANEL trained by material with an agglomerate wood soul with a thickness 38 mm related by resins of high benefits.
- PEDESTALS, element realized completely in galvanized steel in charge to equip to the pavement of the height necessary for the project to realize, these elements incorporate in their head meetings plastic anti-noise with four projections of positioning. Between its qualities we emphasized the one of being vertically adjustable thanks to a threaded bolt of metric 14.
|
|
The main elements of the system are divided in:
- Structure, composed by different elements in charge to sustain
the pavement and to equip it with the necessary height and rigidity marked in project.
- Panel, like component that contains coating in its face
superior and that as it leaves from the system will contribute of decisive way
in aspects how the acoustics, characteristics in front of the fire, resistance
mechanics and electrical characteristics of the system.
Description:
- PANEL trained by material with an agglomerate wood soul with a thickness 38 mm related by resins of high benefits.
- PEDESTALS, element realized completely in galvanized steel in charge to equip to the pavement of the height necessary for the project to realize, these elements incorporate in their head meetings plastic anti-noise with four projections of positioning. Between its qualities we emphasized the one of being vertically adjustable thanks to a threaded bolt of metric 14.
|
|
|
|
|
|
FEATURE BENEFITS
Lock down system for maximum rigidity and stability
Light weight reduces floor slab loadings - makes lifting easy
Solid underfoot - no creaking or rocking
Unauthorised entry deterred
Fully accessible and interchangeable panels
Chamfered panel edges that ease lifting and replacement
TYPICAL AREAS OF APPLICATION
General office areas, light and medium use.
DESCRIPTION
This lock down floor panel range is fully rated to the requirements of the Harmonised European Standard for raised access floors, BSEN 12825. The design incorporates a unique lock down system which allows a minimum number of fixings to be used. The D-Lock system provides a cost effective solution to providing a solid platform with all of the attributes that are required of a raised access floor system.
CONSTRUCTION
These floor panels are based on a 600mm square module constructed around a high performance chipboard core. This chipboard core is machined by a process that ensures the required tolerances are met. This machining process also includes the provision of the corner lock down facility. Corner locking is achieved using a clamping washer and screw, eliminating panel movement and limiting unauthorised access to the floor void. The pedestal head cap includes a plastic moulding that provides positive location for the panel and includes provision for the lock down screw.
|
|
LAMINATE
Made from layers of Kraft paper processed at high pressure with phenolic resin and a melamine decorative layer, particularly suitable for areas of medium-high levels of transit that need to be easy to clean and hard-wearing
|
|
The main elements of the system are divided in:
- Structure, composed by different elements in charge to sustain
the pavement and to equip it with the necessary height and rigidity marked in project.
- Panel, like component that contains coating in its face
superior and that as it leaves from the system will contribute of decisive way
in aspects how the acoustics, characteristics in front of the fire, resistance
mechanics and electrical characteristics of the system.
Description:
- PANEL trained by material with an agglomerate wood soul with a thickness 38 mm related by resins of high benefits.
- PEDESTALS, element realized completely in galvanized steel in charge to equip to the pavement of the height necessary for the project to realize, these elements incorporate in their head meetings plastic anti-noise with four projections of positioning. Between its qualities we emphasized the one of being vertically adjustable thanks to a threaded bolt of metric 14.
|
|
STONEWARE
Our focus on the decorative aspect of the raised floor has led us to concentrate on stoneware finishes: the ideal solution as regards performance and appearance.
In our factory each panel, already backed with the finish, is ground, rimmed and bevelled to produce a perfect panel in whatever size is required.
Ceramic tiles with a compact mass made from a controlled mixture of natural raw materials such as noble clays, quartz, feldespates and metal oxides, are pressed and completely synthesised at a temperature of 1250°C.
|
|
The main elements of the system are divided in:
- Structure, composed by different elements in charge to sustain
the pavement and to equip it with the necessary height and rigidity marked in project.
- Panel, like component that contains coating in its face
superior and that as it leaves from the system will contribute of decisive way
in aspects how the acoustics, characteristics in front of the fire, resistance
mechanics and electrical characteristics of the system.
Description:
- PANEL trained by material with an agglomerate wood soul with a thickness 38 mm related by resins of high benefits.
- PEDESTALS, element realized completely in galvanized steel in charge to equip to the pavement of the height necessary for the project to realize, these elements incorporate in their head meetings plastic anti-noise with four projections of positioning. Between its qualities we emphasized the one of being vertically adjustable thanks to a threaded bolt of metric 14.
|
|
TERRA COTTA
This is a material with an ancient tradition which valorises interiors and gives an extremely warm atmosphere.
Damp drawn, dried and subsequently baked in a kiln, for application on raised floors it is ground, squared, bevelled and pre-treated on the surface in the factory.
|
|
|
Marble, granite, stone and other recomposed materials allow to produce highly technical and aesthetic finishes, suitable for high profile environments where it’s important to show off higher class flooring, such as in head management premises, foyers, sample collection showrooms and representative premises.
|
|
|
|
|
|
Monointec is the most innovative, technological system produced by Intec, because it has revolutionised the raised floor, with the introduction of the concept of the “reinforced minislab”, where the finish adheres to the composite material of the support thanks to an aggressive and impermeable bond: all without glue. The result is a single and thin monolithic block with outstanding chemical and physical characteristic: highest dimensional stability, sound proofing and a higher resistance to water and humidity, as well as to the fire and to acids; a high aesthetical solution; maintenance and cleaning as for a traditional floor. Monointec has been specifically engineered for use with top finishes such as porcelain stoneware, marble and granite and allows to make the most out of this kind of finishes, above all where water and acids in-absorbency are concerned, thus preserving their extraordinary properties of durability and cleanability.
Moreover, the minimal thickness makes it particularly suitable for restoring projects, in other words, cases where a conventional floor has been removed. Monointec allows the height required to install the raised floor to be kept at the lowest: the underfloor plenum, in which the structure complete with stringers is laid, and the thickness of the panel with porcelain stoneware top finish can all be included in just 6 cm height.
|
|
METALLIC GROUND
Metallic fabrics, you enmesh flexible or rigid with multitude of forms and designs that allow to cover great outer surfaces, to create inner virtual spaces or simply to generate illusions visual combining light and color.
The stainless steel fabrics are very versatile as much in their applications as in their characteristics, with a great variety of models that can make in the measures that the project demands and use the more appropriate systems of anchorage for each application.
Outer closings of great spaces that combine esthetic and functionality in a same material. Applications for interiors, panelado of walls, division of spaces or subtle light filters.
|
|
An extremely wide choice of materials allows to customize Uniflair access floors to the most demanding needs:
- from carpeting to fine wood,
- linoleum to Florentine cotto,
- ceramic to marble,
- and recomposed stone, each area of a building can have its architectural style..
|
|
An extremely wide choice of materials allows to customize Uniflair access floors to the most demanding needs:
- from carpeting to fine wood,
- linoleum to Florentine cotto,
- ceramic to marble,
- and recomposed stone, each area of a building can have its architectural style..
|
|
|
|
