|
|
Teknofloor® ST 40 panel in high-density chipboard made from wood chips, resin and inert materials with high resistance to mechanical strain and fire. Processing is performed with grinding of the entire panel already backed with the surface so as to make it all perfectly suitable for the attachment of the self-extinguishing perimetral edge fitted all along the height of the panel before final bevelling of the surface finish.
Total thickness with surface finish in resilient material or laminate approximately 40mm.
Total thickness with surface finish in porcelain stoneware approximately 48mm.
Total thickness with surface finish in stone from 50 to 55 mm approximately.
TECHNICAL DESCRIPTION:
REACTION TO FIRE: Class 1
RESISTANCE TO FIRE: REI 45
ELECTRICAL RESISTANCE: ? 2x10E11 ohm
SOUND DEADENING POWER: %u2265 32 db
DENSITY: 720/740 Kg/m3
DIMENSIONAL VARIATION (after 24 hours immersion in water):?10%
HEAT CONDUCTIVITY WHEN DRY 0.16 w/m2k
WEIGHT OF PANEL (with finish in resilient material/aminate):±10.5 Kg
WEIGHT OF PANEL PER SQ.M.(with finish in resilient material/laminate):±27.8 Kg
WEIGHT OF PANEL (with finish in porcelain stoneware): ±19.5 Kg
WEIGHT OF PANEL PER SQ. M. (with finish in porcelain stoneware):±54.2 Kg
|
|
The Gammabox M0 panel has been specially designed to meet the requirements of technical, data processing and scientific applications, when a high protection is necessary in case of fire.
The Gammabox M0 panel is classed M0 ( incombustible ).
It is suitable for all the coverings used with access flooring, excepted textile and mineral coverings.
Composition :
The Gammabox M0 panel is made up as follows :
A mineral core, thickness 30 mm.
A bottom tray of 0.5 mm thick galvanized steel turning up the sides of the panel.
A perimeter plastic edge trim.
Coverings :
The Gammabox M0 panel is available with the following coverings :
High pressure laminate.
Vinyl.
Linoleum.
Rubber.
Dimensions :
Standard size : 600 mm
Fire Classification :
The Gammabox M0 panel is classed M0 ( SME/SNPE report n° 12189-05).
Electrical resistance :
It varies from 5x108 to 2x1012 ohms, depending on the properties of the covering.
Acoustic :
The acoustic insulation measured between 2 adjacent rooms, separated by a densely insulated partition, varies from 46 to 51 dBA, depending on the thickness of the panel and the covering ( Dn,f,w according to Standard EN ISO 140-12).
|
|
The Gim-Pf panel allows air supply at any location of the access floor.
These panels are entirely made of steel and compatible with all other Gamma panels.
Loading performances :
The load classes of the Gim-Pf panels are identical to the classes of the panels they mixed with.
Air flow Characteristics :
The total free area per panel is 8 dm².
Optional adjustable sliding dampers can be fitted for adjustment of the air flow.
The graph below shows the possible air flow according to the air pressure in the plenum and the air pressure drop according to the air flow.
|
|
|
The access floor constructions of MERO type 3 steel are, due to their special characteristics, the solution for production areas, clean rooms, data processing centres or laboratories. They are used wherever robust material characteristics are necessary, aside from high and loadings and fracture strength. The access floor panel type 3 consists of a frame of steel profiles with a cover of high quality sheet. All parts are welded. The conductive powder coating protects against corrosion.
|
|
Alucast is an aluminium die-cast panel of great strength.
Alucast is suitable for industrial and high-tech clean rooms installations, and for rooms with non-magnetic requirements.
The panel is suitable for all the soft coverings normally used for access flooring.
Composition :
The Alucast panel is made up as follows :
A top distributor plate, 3 mm thick.
A double peripheral reinforced rib.
A network of central ribs.
The monolithic conception of Alucast panels enables to reach the levels of performance and accuracy required for high-tech applications.
Coverings :
The Alucast panel, plain or perforated, is available with the following finishes :
Vinyl
Rubber.
The Alucast grating (AF6) is available rough or epoxy painted.
Alucast PF 2 : Perforated panel 11 % free area. Dimensions :
Standard size: 600 mm.
Alucast PF 4 : Perforated panel 22% free area.
Fire classification :
Without covering, the Alucast planel is classed M0 ( incombustible), by nature.
Electrical Resistance :
It varies from 5x105 to 2x1012 ohms, depending on the properties of the covering.
Alucast AF 6 : Grating 60% free area.
Range of perforations :
Alucast PF 1 : Perforated panel 7% free area.
Alucast PF 2 : Perforated panel 11% free area.
Alucast PF 3 : Perforated panel 15% free area.
Alucast PF 4 : Perforated panel 22% free area.
Alucast AF 5 : Perforated panel 40% free area.
Alucast AF 6 : Grating 60% free area.
|
|
Teknofloor® SS 30 panel with core made from a mixture of anhydrous calcium sulphate reinforced with organic fibres free of asbestos and any toxic materials. Panel with elevated resistance to mechanical strain and fire, excellent sound-deadening properties and minimal propagation of impact noise. Thanks to its characteristic stability of form and dimensions this type of panel is also able to guarantee that the floor is hard-wearing.
Processing is performed with grinding of the entire panel already backed with the surface so as to make it all perfectly suitable for the attachment of the self-extinguishing perimetral edge. The last step is to bevel the surface finish.
Total thickness with surface finish in resilient material or laminate approximately 32 mm.
Total thickness with surface finish in porcelain stoneware approximately 40 mm.
Total thickness with surface finish in stone from 40 to 50 mm approximately.
TECHNICAL DESCRIPTION:
REACTION TO FIRE: Class 1
RESISTANCE TO FIRE: REI 90
ELECTRICAL RESISTANCE: ≤ 2x10E10 ohm
SOUND DEADENING POWER: ≥ 38 db
DENSITY: 1500 Kg/m3
DIMENSIONAL VARIATION (after 24 hours immersion in water):≤0,3%
HEAT CONDUCTIVITY WHEN DRY 0,44 w/m2k
WEIGHT OF PANEL (with finish in resilient material/laminate):±17,5 Kg
WEIGHT OF PANEL PER SQ.M.(with finish in resilient material/laminate):±48,6 Kg
WEIGHT OF PANEL (with finish in porcelain stoneware): ±24,3 Kg
WEIGHT OF PANEL PER SQ. M. (with finish in porcelain stoneware):±67,5 Kg
|
|
The Buropac panel has been specially designed for use in offices and computer rooms.
This panel is also recommended for rooms with non-magnetic requirements. It is suitable for all the coverings used with access flooring.
Composition :
The Buropac panel is made up as follows :
A high density resin bonded core, thickness 38 mmm.
A bottom aluminium foil.
An ABS surround, heat bonded to the edge of the core.
Dimensions :
Standard size : : 600 mm.
Options :
Bottom plate of 0.2 mm thick aluminium.
Top varnished.
Fire classification :
The Buropac panel is classed M1 ( SNPE report n° 13148-07).
Electrical resistance :
It varies from 5x105 to 2x1012 ohms, depending on the properties of the covering.
Acoustic :
The acoustic insulation measured between 2 adajacent rooms, separated by a densely insulated partition, varies from 44 to 50 dBA, depending on the covering ( Dn,f,w according to Standard EN ISO 140-12 ).
|
|
The Burobox panel is widely used in office buildings.
It can be covered with textile tiles used with access flooring, free laid on site.
Composition :
The Burobox panel is made up as follows :
A high density resin bonded core, thickness 30 or 38 mm.
A bottom tray of 0.5 mm thick galvanized steel turning up the sides of the panel.
Coverings :
The Burobox panel is available without covering.
Dimensions :
Standard size : 600 mm.
Special size : 675 mm, for thickness 38 mm only.
Options :
Top varnished.
Top plate of 0.5 mm thick galvanized steel.
19 mm thick core.
Fire classification :
The Burobox panel is classed M1 ( SNPE report n° 13149-07 ).
A Burobox panel classified M0 is also available.
Electrical resistance :
It varies from 5x108 to 2x1012 ohms, depending on the properties of the covering.
Acoustic :
The acoustic insulation measured between 2 adjacent rooms, separated by a densely insulated partition, varies from 46 to 51 dBA, depending on the thickness of the panel and the coverning ( Dn,f,w according to Standard EN ISO 140-12 ).
|
|
1 Core
38 mm thk. high density chipboard 720 kg/mc, mixed with thermosetting resin, low emission E1 class as per EN312-1 norm
2 Edge
trim 0,5 mm thk. no-creak self-estinguishing plastic band
3 Top covering
see the list at sides
4 Bottom covering
T38AA: 0,05 mm. pvc protected no-scratch and no-rip aluminium foil to provides an optimal barrier to the moisture and improved the electrical conductivity
T38AT: fi nished by steel tray 0,5 mm thk. to provide a proper isolation to the moisture and improve the mechanical performance and the electrical conductivity
Dimensions 600 x 600 x 38 mm + top covering thk.
|
|
FEATURE BENEFITS
High edge strength reducing edge to edge deflection
Precision construction and location for a accurate floor grid
Solid underfoot
Panel construction gives Class O fire rating
Excellent electrical continuity is maintained
Good acoustic performance
Safe and easy access
Excellent lateral stability
600mm x 900mm oversize panels available in order to minimise perimeter cutting.
TYPICAL AREAS OF APPLICATION
General office areas.
DESCRIPTION
This screw down floor panel is fully rated to the PSA MOB PF2 PS/SPU medium grade requirements. The design incorporates a unique wrap-around construction which provides total encapsulation of the chipboard core. This design also improves panel edge strength and accessibility. With an overall thickness of 26mm this slim design provides the maximum usable void within the confines of a given finished floor height, an important aspect when the slab to slab dimension is limited.
CONSTRUCTION
The 600mm square TorLock medium grade is manufactured to a thickness of 26mm using a high density chipboard core fully bonded and encapsulated within a casing of galvanised steel. The panels are engineered to fine dimensional tolerances for modular control, accurate grids and prevention of creep. A unique die-formed perimeter flange protects against edge damage and panel jamming. Full dimensional accuracy ensures that all TorLock medium grade panels are fully interchangeable with each other. Corner locking to the pedestal head gives rock free solid stability, safeguarding the floor's structural properties even during heavy maintenance, while still allowing authorised access to the floor void.
|
|
Technical Information Applied Load Indenter Size Deflection mm (max)
Concentrated Load
Test-1 4.5 kN 300 mm2 2 mm
Concentrated Load
Test-2 3 kN 25 mm2 2.7 mm
Distributed Load
Test 8 kN/m2 / 1.5 mm
Safety Factor Load Test <=3 / /
Size: 600 x 600 mm
Height: 30 mm
Top and bottom coverings are aluminium foil
Black PVC edging 0.4 mm thickness
Please contact us for the different panel types.
|
|
Technical Information Applied Load Indenter Size Deflection mm (max)
Concentrated Load
Test-1 4.5 kN 300 mm2 2 mm
Concentrated Load
Test-2 3 kN 25 mm2 2.7 mm
Distributed Load
Test 8 kN/m2 / 1.5 mm
Safety Factor Load Test <=3 / /
PVC: 2.0 mm thickness
Steel : 0.5 mm thickness, galvanized
Black PVC edging 0.4 mm thickness
Size: 600 x 600 mm
Height: 32.5 mm
|
|
Galvanized Steel
Technical Information Applied Load Indenter Size Deflection mm (max)
Concentrated Load
Test-1 4.5 kN 300 mm2 2 mm
Concentrated Load
Test-2 3 kN 25 mm2 2.7 mm
Distributed Load
Test 8 kN/m2 / 1.5 mm
Safety Factor Load Test <=3
STEEL: 0.5 mm thickness
Steel : 0.5 mm thickness, galvanized
Black PVC edging 0.4 mm thickness
Size: 600 x 600 mm
Height: 31 mm
Technical Information Applied Load Indenter Size Deflection mm (max)
Concentrated Load
Test-1 4.5 kN 300 mm2 2 mm
Concentrated Load
Test-2 3 kN 25 mm2 2.7 mm
Distributed Load
Test 8 kN/m2 / 1.5 mm
Safety Factor Load Test <=3 / /
HPL: 1.2 mm thickness
Steel : 0.5 mm thickness, galvanized
Black PVC edging 0.4 mm thickness
Size: 600 x 600 mm
Height: 31.7 mm
|
|
FEATURE BENEFITS
Wide range of covering options available.
Precision construction and location for a accurate floor grid
Solid underfoot
Panel construction gives Class O fire rating
Good electrical continuity is maintained
Good acoustic performance
Safe and easy access
Excellent lateral stability
TYPICAL AREAS OF APPLICATION
Computer rooms, equipment rooms, print rooms etc.
DESCRIPTION
This loose lay floor panel is fully rated to the medium, heavy and extra heavy grade requirements of the PSA MOB PF2 PS/SPU specification. The design incorporates a full depth edge band which provides total encapsulation of the chipboard core. This design also provides protection to the edge of the surface covering.
CONSTRUCTION
These floor panels are based on a 600mm square module constructed around a high performance chipboard core. The top and base surfaces of the core are laminated with galvanised sheet steel. The appropriate surface covering is then laminated to the top surface before being trimmed to fit flush with the panel sides. The panel edges are then laminated with an ABS edge band which provides protection to the chipboard core and surface covering. Electrical continuity is provided through the panel construction to the steel base steel and hence to the pedestals. Positive location and retention of the floor panel is achieved by the use of a moulded plastic cap.
|
|
1 Core
28 mm thk. high density calcium sulphate =1450 kg/m3, reinforced by cellulosic
organic fi bres , class "0" of reaction to fi re, according to International standards
2 Edge trim
1,2 mm thk., no-creak, self-estinguishing plastic band, black/grey colour
3 Top covering
ceramic grés
4 Bottom covering
G28HAK: 0,05 mm pvc protected no-scratch and no-rip aluminium foil to provides an optimal barrier to the moisture and improved the electrical conductivity
G28HTK: fi nished by steel tray 0,5 mm thk. to provide a proper isolation to the moisture and improve the mechanical performance and the electrical conductivity
Dimensions 600 x 600 x 28 mm + top covering thk.
|
|
The technique of the raised floor as a means of adjusting to modern life, our mission of continual research, our flexibility in satisfying clients' needs have led us to develop and produce an exclusive new series of products: the evolution of the species of raised floors: Darwinfloor.
Darwinfloor is a panel which surpasses all those used up to now, because it is 100% waterproof, odourless, ecological, safe and specifically designed for its purpose with any ceramic or stone finish. A creation designed by us, generated to cater to our clients' requirements, invented to satisfy a number of contemporary needs, destined to change the face of raised floor systems.
Darwinfloor series gives the possibility to realize not only INDOOR installations but also OUTDOOR raised floors.
Total thickness with surface finish in porcelain stoneware approximately 25 mm.
TECHNICAL DESCRIPTION:
REACTION TO FIRE: Class 1
RESISTANCE TO FIRE: REI 90
ELECTRICAL RESISTANCE: ? 2x10E10 ohm
SOUND DEADENING POWER: %u2265 38 db
DENSITY: 2200 Kg/m3
DIMENSIONAL VARIATION (after 24 hours immersion in water): 0 %
WEIGHT OF PANEL (with finish in porcelain stoneware): ±24,3 Kg
WEIGHT OF PANEL PER SQ. M. (with finish in porcelain stoneware):±67,5 Kg
|
|
|
Modular panel made of chipboard, composed of wood-core particles bound together by heat-hardener resins Thickness available 30 mm and 38 mm. This type of panel is suitable for working environments where a medium level physical-mechanical performance is required. It is recommended with HPL-laminate or resilient top finishes. It is not convenient for areas affected by humidity and it is therefore advisable to limit the use of water as much as possible even for its maintenance.
|
|
|
The ASP Ultra Panel SF series steel cementious panels are designed for exceptional strength, without compromising performance, weight, and ease of use. The system is suitable for carrying heavy rolling loads and high traffic areas, in a vast range of applications.
|
|
|
The ASP A Series Aluminium raised acces floor panel is constructed from high strength industrial grade aluminium, creating an ultra strong and light floor system.
|
|
Airflow Access Floor Panels
Tate's perforated access floor panels and grates provide superior cooling for managing heat loads in mission critical facilities. Perforated steel panels and GrateAire® aluminum panels are compatible with ConCore® and All Steel panels in bolted stringer systems.
|
|
|
Tate's perforated access floor panels and grates provide superior cooling for managing heat loads in mission critical facilities. Perforated steel panels and GrateAire® aluminum panels are compatible with ConCore® and All Steel panels in bolted stringer systems.
|
|
|
The ASP perforated panel is the perfect way to provide ventilation from under the raised access floor. Designed for use in computer and heavy eqquipment rooms the ASP perforated panels will ensure your valuable equipment is kept running cool.
|
|
|
Panels fitted with holes for air flow.
|
|
Aluminum System
Tate Floating Floors are the ideal solution for class M1 applications. This access floor system consists of complete die cast aluminum components that are typically used in hi-tech environments such as biomedical, microelectronic, pharmaceutical and laboratory facilities.
|
|
|
Modular panel made of homogeneous high density calcium sulphate constituted of gypsum and vegetable organic fibres. Suitable for working and executive environments, it can be combined with ceramic and stoneware top finishes, even if it is ideal when used with resilients and HPL-laminates top finishes. The technical characteristics can vary according to the thicknesses available, 30 and 34 mm, although high physical-mechanical performance, excellent fire-resistance and high levels of sound-proofing are always guaranteed.
|
|
|
Access floors have emerged as a practical solution for numerous building types, not just the traditional office and data center settings with which they are most often associated. Tate Access Floors has made a commitment to service the needs of both existing building and new construction markets by expanding our product offering to include new and exciting finishes such as luxury vinyls, wood veneers, cork rubber and stone as well as the traditional high pressure laminates, static control vinyls and freelay carpet and hard tile finishes.
|
|
The Triple"R" panel has a triple rolled reinforced side edge that gives added strength. This revolutionary unique design leads the industry with its extra strength, quality and durability.
The design prevents the top lids from catching on adjacent panels and ripping off. This reduces damage, deflection and maintains stability.
|
|
PANELS
Clad in Galvanized Steel, Stainless or Die cast Aluminum
FLOOR LOADS
PAF Clean Room Floor Systems are engineered to suit all loading requirements for uniformly distributed load of 8 kN/m2 to extra heavy uniformly distributed loads of 40kN/m2.
|
|
|
All Steel Access Floor panels are epoxy coated unitized shells consisting of a flat steel top sheet welded to a formed steel bott | | |
