|
|
DESCRIPTION
Pedestal: completely in galvanized steel with +/-25mm 6 position regul.nut
Head gasket: 2,5mm thk. PVC for an optimal stamping noise attenuation
Stringer: "L" light stringer H=18mm
"M" medium stringer H=30mm
"H" heavy stringer 25x25 mm
Stringer gasket: 1 mm thk. PVC for an optimal stamping noise attenuation
Grid dimensions: std. 600x600mm, on demand 596x596, 598x598, 604x604mm (further dimentions on demand)
|
|
|
This all steel pedestal fully complies with the requirements of BS EN 12825 and is used for finished floor heights from 60mm to 380mm. The pedestal design utilises a 90mm diameter head which allows the use of standard plastic head caps. The baseplate is nominally 80mm square and includes provision for the use of mechanical fixing to the sub-floor in addition to the use of pedestal adhesive if required. Two designs of the pedestal head allows for the use of screw down floor panels or the use of stringers; specify at time of order.
|
|
- Versatile understructure for all types of installations
- Electrical resistance of less than 10 ohms
- ASM's steel manufacturing facility is ISO 9002 registered
ASM's superior finishes are effective and consistent, giving a bright and polished look with protective properties. All ASM's parts are dipped in the corrosion-resistant finish after stamping and welding, to protect welds and raw edges from rusting.
|
|
|
ASM offers the most comprehensive variety of pedestal types allowing for durable strength in any of zones 1 through 4. This full line of pedestals can further be strengthened by bolting them to the concrete slab for the most solid access flooring systems available. ASM introduces its Atlas Pedestal Systems, designed for optimal heavy duty support and for the most severe conditions. No other system compares for strength and simplicity.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
