|
|
Produced description
Rigid panel in rock wool to high density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of roofings flat (warm roof) and tilted.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles also in case of absence of mechanical implantations (incollaggio).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
|
|
Produced description
Rigid panel in rock wool to double density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of slanted and flat roofings (warm roof).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles.
|
|
Rigid, fire safe stone wool slab with high thermal insulation perfomance. It is faced with a natural coloured glass tissue.
|
|
Semi-rigid, fire safe stone wool slab with high thermal insulation performance.
|
|
Rigid, fire safe stone wool board. It is faced with a natural coloured glass tissue.
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance.
|
|
Very rigid, fire safe stone wool board with high thermal insulation performance and load bearing capacity.
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
|
With a pressure resistant, self-supporting and form-stable structure Conlit® Steelprotect board defies the fire.
|
|
| ... products without information |
| |
Glass wool of white color in flakes for mechanical blowing in the difficult lost roofs of access.
Thermo isolation and acoustics by blowing:
- on the floor of the lost, non made-up and difficult to reach roofs,
- on supports tight with the air,
- with the top of buildings of weak or average hygroscopy,
- in the residential and not-residential buildings,
- in nine as in restoration,
- using a blowing machine (with carding brushes or fan).
- Solution making it possible to fulfill the requirements regulations thermics, acoustics and of security sets fire to.
- Technique of insulation being appropriate for the ventilated roofings aimed by the DTU of series 40.
|
|
|
Proven in-place performance on interior structural steel makes it the most widely used fireproofing in the world. MK-6® is a low cost, gypsum based cementitious spray-applied fireproofing designed for easy, fast application to steel and concrete substrates. Available in two different formulations, Monokote affords greater flexibility for both small and large projects.
|
|
|
|
|
|
Product containing mineral wool applicable by projection and intended for the protector sets fire to, with the acoustic correction, even with the heat insulation.
The application of ISOFLAM makes it possible to realize by direct projection on the support to protect a protector against the fire, or an acoustic correction.
According to the nature of the element to be covered, it will be proceeded to the creation of a bridge of fixing with our primary education of adherence ISOFIX or to the installation of a mesh wire.
The components of ISOFLAM also utter excellent properties of thermo isolation to him.
Its adhesive qualities and its flexibility authorize the use of ISOFLAM without risk of cracking, nor of dilation on all plane or curved architectural forms.
This monolithic application (absence of joints) presents a uniform rustic completion without losses of performances.
ISOFLAM combines high level performances with economic characteristics by offering a quality ratio/reasonable price, while ensuring the setting in conformity of the buildings in order to answer the standards and rules of construction.
|
|
|
Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of low melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing buildings or it can be used as a protective coating over foam in new construction projects as a combination system.
|
|
|
Whether your facility has been around for years or is currently under construction, protecting your fibrous insulation and fireproofing with Protek-13® is a spray-applied, water based vinyl acrylic emulsion containing interlacing/bridging fibers forming a protective white coating over fibrous surfaces.
|
|
|
One of a pair of external escape stairs, each serving 3 floors, supported on centrally postioned columns, featuring radiused landings, solid sheet type balustrades and split canopy at high level. All galvanised with site applied paint finish.
|
|
|
External spiral escape stair with flat outer string, durbar plate treads, tubular handrails/balustrades, circular canopy and contrasting paint finish.
|
|
One of four external galvanised spiral escape stairs
|
|
|
Proven in-place performance on interior structural steel makes it the most widely used fireproofing in the world. MK-6® is a low cost, gypsum based cementitious spray-applied fireproofing designed for easy, fast application to steel and concrete substrates. Available in two different formulations, Monokote affords greater flexibility for both small and large projects.
|
|
|
Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of low melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing buildings or it can be used as a protective coating over foam in new construction projects as a combination system.
|
|
|
Whether your facility has been around for years or is currently under construction, protecting your fibrous insulation and fireproofing with Protek-13® is a spray-applied, water based vinyl acrylic emulsion containing interlacing/bridging fibers forming a protective white coating over fibrous surfaces.
|
|
SHEETROCK® FIRECODE® Core gypsum panels are the original, most widely used Type X gypsum panels on the market. The panels score and snap easily for quick installation, allowing painting, decorating, and the installation of metal or wood almost immediately. They are composed of fire-resistant gypsum core encased in 100-percent recycled natural-finish face paper and 100-percent recycled liner paper on the back side. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with a USG Interior Finish System.
The panels are available in 5/8"-inch thickness and are UL-Classified (Type X) for application in fire -rated construction.
|
|
|
GTEC Fire Board has one decorative pink face with either a tapered edges, or square edge profile and a grey faced back liner, and is suitable for installation with stud partitions, lining systems and ceilings that require superior fire performance.
|
|
Aluflam A/S produces fire proof Doors with a range of classifications: EI15 - EI30 - EI45 - EI60 in system AF85
Variations: Single door, Double door, Single/Double door with side partition/s, and/or top partition/s.
|
|
|
The MB-78EI fire partition system is characterized by both the tightness and the fire insulation properties. It meets the constantly toughening requirements of Polish and European standards as regards the constructions surrounding the zone of a safe evacuation for people and property in a burning building. It is intended for producing internal or external fire partition walls with single- or double-leaf doors featured by a fire resistance class of EI15, EI30, EI45 or EI60, according to the PN-B-02851-1:1997 and PN-EN 13501-2:2005 norm. To a great extent, it is compatible with the standard window/door systems of ALUPROF S.A.: MB-45, MB-60 and MB-70 (they have common sections, details, hardware, treatment processes, etc).
|
|
|
|
see the results for the following category : 
