|
|
|
|
|
|
Insulation
Kalzip insulation products conserve energy through their use by reducing the requirement to heat or cool buildings, limiting CO2 emissions. They are also HCFC and HFC free and have a global warming potential (GWP) rating of less than five
The most common insulation used is a quilt type, non-hygroscopic material that will not absorb any moisture, but simply retain it on the surface of its fibres thus encouraging evaporation to take place.
The use of a compressed insulation, completely filling the roof void above the vapour control layer, together with the breathability of the Kalzip sheet seams, negates the need for a breather membrane material within the Kalzip roof system.
Kalzip's range of insulation products includes glass and rockfibre quilt, semi-rigid slab and high density slab. At the heart of the range are Kalzip Insulation Plus 35 and Plus 37, which are high performance mineral fibre quilts offering extremely efficient thermal performance.
To complete the range further, glass and rockfibre insulants are available offering a wide variety of thermal performance values together with the flexibility of use where additional acoustic performance is required.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
NoiseReducer products are designed for use in commercial and residential wall and ceiling assemblies to effectively reduce transmission of airborne sound and provide thermal insulation.
NoiseReducer Sound Control Batts are designed for wood stud interior walls and floors to help you add “the sounds of silence” to any home, as well as helping you differentiate yourself from your competition. Quite simply, NoiseReducer Sound Control Batts provide a sound-absorber that fills the void between interior wood studs. This absorber effectively breaks the path of sound. In other words, NoiseReducer batts keep the peace in new homes and work environment... limiting sound levels without limiting normal activity.
|
|
DESCRIPTION
- Boards of resin bonded glass fibers in a range of densities.
- Unfaced boards for use where an exterior finish will be applied.
- Foil Scrim Kraft (FSK) faced boards provide a clean metallic surface finish.
- All Service Jacket (ASJ) faced boards provide a white surface finish.
USES
- Where rigidity properties of a board product are required.
- Adding sound absorption to interior spaces.
- For exposed or non-exposed applications where a Fire Hazard Classification of 25/50 is required.
|
|
Ideal product for false ceilings and insulated wall claddings.
The panel consist of a stiff sheet metal support, which produces an excellent finish on the exposed part, and a flexible "nonwoven glass fibre" support (see MONOLAMIERA). On the exposed part, this panel is made with the same profiles and colours as the ISOPAR panel.
Maximum length of ISOPAR MONOLAMIERA single sheet panels is 5 metres.
|
|
|
|
|
|
Insulation
Kalzip insulation products conserve energy through their use by reducing the requirement to heat or cool buildings, limiting CO2 emissions. They are also HCFC and HFC free and have a global warming potential (GWP) rating of less than five
The most common insulation used is a quilt type, non-hygroscopic material that will not absorb any moisture, but simply retain it on the surface of its fibres thus encouraging evaporation to take place.
The use of a compressed insulation, completely filling the roof void above the vapour control layer, together with the breathability of the Kalzip sheet seams, negates the need for a breather membrane material within the Kalzip roof system.
Kalzip's range of insulation products includes glass and rockfibre quilt, semi-rigid slab and high density slab. At the heart of the range are Kalzip Insulation Plus 35 and Plus 37, which are high performance mineral fibre quilts offering extremely efficient thermal performance.
To complete the range further, glass and rockfibre insulants are available offering a wide variety of thermal performance values together with the flexibility of use where additional acoustic performance is required.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
NoiseReducer products are designed for use in commercial and residential wall and ceiling assemblies to effectively reduce transmission of airborne sound and provide thermal insulation.
NoiseReducer Sound Control Batts are designed for wood stud interior walls and floors to help you add “the sounds of silence” to any home, as well as helping you differentiate yourself from your competition. Quite simply, NoiseReducer Sound Control Batts provide a sound-absorber that fills the void between interior wood studs. This absorber effectively breaks the path of sound. In other words, NoiseReducer batts keep the peace in new homes and work environment... limiting sound levels without limiting normal activity.
|
|
DESCRIPTION
- Boards of resin bonded glass fibers in a range of densities.
- Unfaced boards for use where an exterior finish will be applied.
- Foil Scrim Kraft (FSK) faced boards provide a clean metallic surface finish.
- All Service Jacket (ASJ) faced boards provide a white surface finish.
USES
- Where rigidity properties of a board product are required.
- Adding sound absorption to interior spaces.
- For exposed or non-exposed applications where a Fire Hazard Classification of 25/50 is required.
|
|
Ideal product for false ceilings and insulated wall claddings.
The panel consist of a stiff sheet metal support, which produces an excellent finish on the exposed part, and a flexible "nonwoven glass fibre" support (see MONOLAMIERA). On the exposed part, this panel is made with the same profiles and colours as the ISOPAR panel.
Maximum length of ISOPAR MONOLAMIERA single sheet panels is 5 metres.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
Sunglass is specialised in the production of curved glass for the sector of building and architecture, industry and decoration
Research, experimentation and high level technologies have enabled the company to achieve ambitious goals that demonstrate and highlight its great technical and productive capacity as well as the high quality and reliability of its products.
|
|
|
|