|
|
ELYCOP® is a sandwich pre-fabricated roofing system, insulating and self-bearing, precurved to a fixed radius of 3.30 m.
The modular elements create an opaque roof, diffused shed light interrupted by ELYPLAST® (C496) double-walled skylights.
ELYCOP® is used on pre-fabricated structures with alternating wing-shaped or Y beams, to create a light, dependable and functional roof.
|
|
Mineral fibers
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet stainless steel AISI 304 or316. Treatment of inner surface with a special machining of promoting the adhesion of polyurethane.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
- 3 Greek tightening
- wide range of surface finishes
- ideal for roofing
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
|
|
|
|
Insulation
Kalzip insulation products conserve energy through their use by reducing the requirement to heat or cool buildings, limiting CO2 emissions. They are also HCFC and HFC free and have a global warming potential (GWP) rating of less than five
The most common insulation used is a quilt type, non-hygroscopic material that will not absorb any moisture, but simply retain it on the surface of its fibres thus encouraging evaporation to take place.
The use of a compressed insulation, completely filling the roof void above the vapour control layer, together with the breathability of the Kalzip sheet seams, negates the need for a breather membrane material within the Kalzip roof system.
Kalzip's range of insulation products includes glass and rockfibre quilt, semi-rigid slab and high density slab. At the heart of the range are Kalzip Insulation Plus 35 and Plus 37, which are high performance mineral fibre quilts offering extremely efficient thermal performance.
To complete the range further, glass and rockfibre insulants are available offering a wide variety of thermal performance values together with the flexibility of use where additional acoustic performance is required.
|
|
|
|
|
|
Competitive Strengths
Market leader
Efficient distribution channels
Comprehensive product range
Markets Served
Insulation Boards are supplied to industrial and commercial building projects and domestic housing. The products servicing the HVAC industry are supplied on a worldwide basis to projects such as airports, hotels and leisure centres. There are four manufacturing plants based in the UK, Ireland and Holland serving these markets.
Building Fabric Insulation Applications
There has never been more pressure on architects and specifiers to reduce carbon dioxide and greenhouse gas emissions by building more energy efficient buildings. It is well documented that better thermal insulation is a good means of tackling the issue of global warming by reducing the energy used in heating and the burning of fossil fuels.
Kingspan specialise in the solution of insulation problems and offer the most comprehensive range of products available from any UK or Irish manufacturer. Kingspan products are amongst the most thermally efficient and technically advanced insulation products available and have many advantages over traditional insulation materials such as mineral fibre.
The range of roof, wall and floor insulants offers the following:
premium performance phenolic insulation
high performance rigid urethane insulation
high performance extruded polystyrene insulation for specialist applications.
|
|
|
Roof is the most exposed element of a facility. It should defy changeable weather conditions, assure water-resistance, and offer protection against cold in wintertime. Simultaneously it shall prevent overheating of the attic rooms in summer time and assure low level of transmission thermal losses in time of winter heating of attic rooms.
|
|
|
Polystyrene rigid foam panel extruded (XPS) of blue color, slotted on the two longitudinal sides and covered of a protector of 10 mm out of mortar modified cement, of strong mechanical resistance.
|
|
Produced description
Rigid panel in rock wool to high density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of roofings flat (warm roof) and tilted.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles also in case of absence of mechanical implantations (incollaggio).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
|
|
Produced description
Rigid panel in rock wool to double density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of slanted and flat roofings (warm roof).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles.
|
|
|
|
|
|
The POWERDECK is a panel of heat insulation with rigid a foam heart of polyisocyanurate covered, on two faces, of a facing aluminum corrugated 50µ.
Dimensions of the panels: 2500 X 1200 mm, 1000 X 1200 Misters Epaisseurs: With flat rims: 30,40,50,60,70,75,80 Misters.
With edges rabbets on 4 with dimensions: 90,100,120 Misters.
Us to consult for flat rims into 90,100 and 120 Misters.
Useful dimensions of the panels rabbets: 2485 X 1185 mm and 985 X 1185 Misters.
Density of foam: 32 kg/m3 ± 2.
Classify compressibility: >150 kPa for a deformation of 10%.
Rigid insulation and resistant of class C.
Tensile strength perpendicular: >80 kPa.
Behavior in fire: Classification Euroclasse B-s2, d0 on vat steel.
Classification Factory Mutual: classify 1 (according to various complexes of roofing).
Thermal coefficient of conductivity certified: value D: 0,024 W/m.K.
ACERMI n° 04/003/329
Implementation: Support of sealing on steel or wood.
In the receiving case of the buildings of the public, a heat shield will be implemented between the support vat steel and the POWERDECK, in accordance with the provisions of the "Guide of use of combustible insulations in ERP" appendix II of the article AM8, Arrêté of October 6th, 2004 and appreciation CSTB bearing n° RS08-174 on the provisions against the fire hazards in the ERP.
This heat shield can be made up of a bed of panels of pearlite on right board of dimension 1200 X 1000 mm, thickness 50 mm with a thermal resistance R = 1 m2 K/W or of any other type of heat shield defines in the AM8.
|
|
|
|
|
|
Support of sealing for roofing concrete, wood or derived from wood
The good answer for the insulation of the roofings terraces.
EUROTHANE AUTOPRO IF is a panel of heat insulation with rigid a foam polyisocyanurate heart (TAUfoam by RECTICEL) covered, on two faces, of a facing composes of a multi-layer coating seals polyester, kraft and aluminum.
Scope of application:
Last nines and rehabilitation.
All zones of wind.
All types of buildings.
Roofings accessible pedestrians, inaccessible, technical, vegetalized.
Minimum Leger, obstruction, do not overload the structure.
Saving of transport, handling and storage.
Until RD = 10 m2. K/W with 2 beds of 120 Misters.
Dimensions panels: 600 X 600 Misters.
Thicknesses: 30-40-50-60-70-80-90-100-110-120 Misters.
Classify compressibility: >150 kPa rigid insulation and resistant of class C.
Tensile strength perpendicular: >150 kPa.
Thermal coefficient of conductivity: 0,024 W/m.K.
Regulation:
ACERMI n°03/003/127
D.T.A. (Technical opinion) n°5/07-1972
DTU 20.12 and 43.4.
Implementation:
The installation of insulation is done into 1 bed poses free or in 2 beds stuck by studs of cold or fixed adhesive mechanically.
The watertight facing will be either in independence with heavy protector, or apparent poses in semi-independence (membrane bituminizes modified semi-adhesive or fixed mechanically and mechanically fixed synthetic membrane)
|
|
|
|
|
|
Support of sealing for roofing concrete, wood or derived from wood.
Effective and powerful insulation for the roofings terraces accessible, inaccessible and technical.
EUROTHANE Br BIO is a panel of heat insulation with a foam heart
rigid polyurethane covered, on two faces, with a composite facing tight with the air, aluminum and kraft.
Scope of application:
Last nines and rehabilitation.
All types of buildings.
Accessible, inaccessible, technical roofings.
Direct support of independent sealing under heavy protector only.
Until RD = 10,30 m2. K/W with 2 beds of 124 Misters.
Very good dimensional stability.
Dimensions panels: 600 X 600 Misters.
Thicknesses: 30-40-50-60-72-82-90-102-110-120-124 Misters.
Classify compressibility: >150 kPa rigid insulation and resistant of class C.
Thermal coefficient of conductivity: 0,024 W/m.K.
Regulation: ACERMI n°04/003/127
DTA (Technical opinion) n°5/02-1665.
Implementation: on roofing concrete in conformity with the DTU 20.12, slope of 0% has 5%. The installation of insulation EUROTHANE Br BIO is done into 1 or 2 beds in free installation without unit limitation of surface of terrace according to DTA (Technical Opinion)
|
|
|
|
|
|
Insulation by the outside of the tilted roofings (method of Sarking) in climate of plain and mountain.
The EUROTOIT is a thermal rigid polyurethane foam insulation panel (PURE) faced of a watertight facing composite polyethylene, aluminum and kraft on the two faces. Rigid insulation and resistant of class C
Thermal coefficient of conductivity certified: 0,024 W/m.K
Density of foam: density 30 kg/m3 ± 2.
Dimensions of the panels matched grooved edges:
2400 X 1200 mm useful: 2380 X 1180 mm
1200 X 1000 mm useful: 1180 X 980 mm
Thicknesses: 60,80,100,120 mm to consult Us for 40,50,70,90,110 mm
The installation is done according to the schedule of conditions of implementation aimed by Alpha Controls.
Mode of installation: The system applies to a continuous support being able to act as ceiling fixed on a frame wood.
Pose in a bed or two beds up to 240 mm thickness is until RD = 10 m ². K/W.
ACERMI N° 04/003/345
Simplicity of implementation, the total cover of the frame allows the removal of the thermal bridges, protects it from thermal variations thanks to fitment reinforced from the panels and to leave a visible frame of the interior by preserving livable space of the roofs.
Effective in winter, in addition to sound high capacity insulation the EUROTOIT contributes to the thermal comfort of summer by its reflective completion thus allowing an airconditioning energy saving during the hot season.
The EUROTOIT can be used in new building or restoration for
apartment buildings, ERP, buildings labor regulation subject to the respect of the regulations in force.
|
|
|
|
|
|
Support of sealing with form of slope integrated on concrete and wood or derived from wood
Lightness with the service of the insulation of the roofings terraces accessible, inaccessible, technical and vegetalized.
EUROTHANE BI3A is a panel of heat insulation with a rigid foam polyurethane heart covered, on two faces, of a facing made up of a grésé bituminized coating has reinforcement veils glass.
Scope of application:
Last nines and rehabilitation.
All types of buildings.
Roofings accessible pedestrians, inaccessible, technical, vegetalized.
Leger and low thickness, true more in restoration.
Great dimensional stability.
Strong mechanical resistance.
EUROTHANE BI3 has is an insulation with form of integrated slope.
Dimensions panels: 600 X 600 mm, 1200 X 600 mm
Thicknesses: 30-40-50-60-70-81-90-100 - slope 1/80 or 1/60.
Classify compressibility: >120 kPa rigid insulation and resistant of class C.
Tensile strength perpendicular: >80 kPa.
Thermal coefficient of conductivity: 0,028 W/m.K.
Regulation: ACERMI n°03/003/121,
DTA (Technical opinion) n°5/07-1951.
Implementation: The installation of insulation EUROTHANE BI3 has is done into 1 or 2 beds. In free installation with coating in independence under heavy protector. By studs of adhesive EAC with coating bituminizes apparent
|
|
|
|
|
|
Support of sealing on concrete and wood or derived from wood
Lightness with the service of the insulation of the roofings terraces accessible, inaccessible, technical and vegetalized.
EUROTHANE BI3 is a panel of heat insulation with a rigid foam polyurethane heart covered, on two faces, of a facing made up of a grésé bituminized coating with reinforcement veils glass.
Scope of application:
Last nines and rehabilitation.
All types of buildings.
Roofings accessible pedestrians, inaccessible, technical, vegetalized.
Leger and low thickness, true more in restoration.
Great dimensional stability.
Strong mechanical resistance.
Dimensions panels: 600 X 600 mm
Thicknesses: 30-40-50-60-70-81-90-100-110-120 mm
Classify compressibility: >120 kPa rigid insulation and resistant of class C.
Tensile strength perpendicular: >80 kPa.
Thermal coefficient of conductivity:
thickness 60 mm value: 0,027 W/m.K.
Regulation: ACERMI n°03/003/121,
DTA (Technical opinion) n°5/07-1950.
Implementation: The installation of insulation EUROTHANE BI3 is done into 1 or 2 beds. In free installation with coating in independence under heavy protector. By studs of adhesive EAC with coating bituminizes apparent stuck to the EAC or semi-indépendant. By studs of cold adhesive with coating in total adhesion cold.
|
|
|
|
|
|
Insulation of the accessible pedestrians, inaccessible, technical and vegetalized roofings terraces.
Direct support of sealing asphalts.
The EUROTHANE S Plus 25 has is a panel of heat insulation with a rigid foam polyurethane heart covered, on two faces, of a facing made up of a coating veils microphone-perforated glass.
Scope of application:
Last nines and rehabilitation.
All types of buildings.
On roofing concrete, wood or derived from wood.
Implementation easy and fast.
Climate of plain and mountain
Dimensions panels: 600 X 600 Misters.
Thicknesses: 30-40-50-60-70-80-90-100-120 Misters.
Density of foam: 32kg/m3
Classify compressibility: > 150 kPa rigid insulation and resistant of class C.
Tensile strength perpendicular: >80 kPa.
Thermal coefficient of conductivity: thickness from 30 to 60 mm: 0,028 W/m.K, thickness from 70 to 120 mm: 0,027 W/m.K.
Regulation: ACERMI n°04/003/311, DTA (Technical opinion) n°5/04-1770 and DTU 20.12 and DTU 43.4.
Implementation: Free installation, without unit limitation of surface of terrace, on carrying element in:
Masonry slope null, punt and tilted.
Wood and drifts slope of 3 have 5%.
Gas concrete slope punt of 1 has 5% and inclined > 5% have 20%.
|
|
|
Rigid rockwool panel, not covered, of high mechanical strength. Rigid rockwool panel, not covered, of class of compressibility B. Solution for inaccessible roofings including the ways of circulation. Heat insulation support of sealing under heavy or mechanically fixed protector.
|
|
|
The Tectum E roof deck panel is a composite of a 1½” or thicker Tectum substrate, EPS (expanded polystyrene) insulation and 7/16“ OSB sheathing with a slip-resistant surface. Components are bonded with code-listed structural adhesives. The EPS core exceeds the requirements of ASTM C-578 Type I and bears the UL classification mark.
|
|
|
Platinum Warmsark is a high duty thermal insulation panel with tightly interlocking tongue and groove joints on all edges developed specifically for use over the rafter plane in pitched roofs. The Warmsark layer completes the thermal envelope and combines with Warmsqueez to provide an exceptionally efficient thermal barrier with no cold bridging.
|
|
|
|
|
|
Low cost, highly efficient, Roofshield keeps the heat where it needs to be Springvale Roofshield has been providing the effective, efficient, cost-effective solution to insulating a wide variety %u2018flat%u2019 roof constructions for decades, making substantial contributions to energy efficiency. An expanded polystyrene rigid board, Roofshield is supplied pre-cut to ensure efficient rainwater run-off.
It is available as both laminated and non-laminated insulation boards to receive a variety of waterproofing layers such as built up felt, mastic asphalt or single ply membranes. Roofshield boards are supplied in a single layer to reduce installation time and can be used in a variety of domestic, commercial or industrial flat or tapered roof applications including concrete deck, metal deck or timber board substrates. The products are supplied in 3 grades, EPS 100, EPS 150 and EPS 200 to meet all compressive strength requirements.
Several board sizes can be supplied to reduce wastage, and any fall gradient can be achieved. The specification of cut-to-falls insulation is a complex task that calls for experience. Springvale%u2019s technical department has been providing and designing cut-to falls systems for many years and can ensure that your roofs will operate efficiently, however complex the design. All boards are supplied sequentially marked, to make installation a simple task. Roofshield is as friendly to the environment as it is to the installer. CFC and HCFC-free, it has an Ozone Depletion Potential of zero; a Global Warming Potential of zero, achieves a BRE Ecopoints ratingof 0.043, will last the life of the building and is totally recyclable at the end of the building%u2019s life.
|
|
Roof insulating panels are made of rigid and closed plastic cells which ensure an optimal thermal performance and excellent water resistance.
Styro Rail offers the SR.P %u2122 100 (type 1) and SR.P %u2122 200 (type 2) as roof insulating panels. These different densities satisfy the varying requirements of builders, engineers and architects.
|
|
|
|
|
|
An inverted roof is basically a single-leaf, unventilated flat or shallow-pitched roof, in which, contrary to (or in an inversion of – hence its name) the “normal flat roof” the thermal insulation lies on top of the waterproofing and is therefore exposed to the elements. It is therefore not the waterproofing that protects the thermal insulation, but the thermal insulation that protects the waterproofing.
JACKODUR® KF Standard is a high-quality thermal insulation in extruded polystyrene foam (XPS). It is particularly suitable for use in inverted roofs as it is compression proof, dimensionally stable, moisture and rot resistant and therefore impervious to the different effects of the weather.
JACKODUR® KF standard thermal insulation for inverted roofs is available in a number of different variations:
* compressive strengths 300 kPa / 500 kPa / 700 kPa
* smooth, extrusion-compressed surface
* edge profile: shiplap (SF)
* thickness between 30 and 320 mm depending on the format desired
* surface area covered depends on format, e.g. 1250x600 mm = 0.75 m²
|
|
|
The Tectum III roof deck panel is a composite of a 1½" or thicker Tectum substrate, Dow Styrofoam® brand XPS (extruded polystyrene) insulation 1½" to 8" thick and 7/16" OSB (oriented strand board) sheathing with a slip-resistant surface. Components are bonded with code-listed structural adhesives. Tectum III panels are typically used in sloped applications where insulation and a nailable surface are required.
|
|
|
The inverted roof is a construction by which the STYRISOL® insulation boards are placed above the waterproof membrane. The insulation is loaded with an additional ballast layer. Insulation boards are installed loosely on the roof covering.
|
|
High performance rigid extruded polystyrene insulation - thermal conductivity 0.029-0.031 W/mK
Protects waterproofing membrane
Closed cell structure minimises water absorption
High compressive strength Withstands freeze/thaw cycling
CFC/HCFC-free with zero Ozone Depletion Potential (ODP)
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
|
|
