- Building & Construction >
- Insulation and sealing >
- Rigid insulation panel
Rigid insulation panels
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Length: 2,500 mm
Width: 1,250, 1,320 mm
Thickness: 500 mm
... Basotect® is not only the ideal solution for acoustic insulation. With its very good thermal insulation properties and easy processing, Basotect® also impresses with respect to thermal insulation ...
BASF Energy efficiency
Thermal conductivity: 0.035, 0.034 W/(m.K)
Length: 1,200, 1,000 mm
Width: 600 mm
... Ventilated Cladding Insulation RAINSCREEN DUO SLAB is a BBA-approved insulation product, that in addition to thermal comfort, provides an independently-tested acoustic benefit. RAINSCREEN DUO SLAB ...
ROCKWOOL
Thermal conductivity: 0.034 W/(m.K)
Length: 1,200 mm
Width: 570 mm
... low thermal conductivity, exceptional resistance to fire and outstanding sound absorption. The non-combustible stone wool insulation has dimensions specifically designed to enable quick and easy installation into timber ...
ROCKWOOL
Thermal conductivity: 0.031, 0.035, 0.04, 0.047, 0.096 W/(m.K)
Length: 1,200 mm
Width: 600 mm
... lightweight and easy to install ULTIMATE™ mineral wool slab. It combines all the advantages of conventional thermal and acoustic insulation with excellent fire performance and is a component of the U Protect System. The ...
ISOVER SAINT GOBAIN
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thickness: 50, 80 mm
... 80 mm Board dimensions: 2600 x 600 mm Excellent thermal insulation properties with λD = 0.035 W/(m·K) High compressive strength > 300 kPa For rooms subject to high moisture loads Benefits JACKOBOARD® ...
Jackon Insulation
Thermal conductivity: 0.038 W/(m.K)
Thickness: 40 mm
... stratification.” The laminated walls associated with soundproofing panels provide distinctly higher performance than monolithic walls, at the same thickness. Biwood is a panel with high sound insulation, ...
Length: 225 cm
Width: 122 cm
Thickness: 12.7 mm
... ISOGARD HD cover board is a 12.7 mm thick, high-density, closed-cell polyisocyanurate (PIR) foam core laminated on both sides to a mineral coated fiberglass facer. The ISOGARD HD cover board spreads ...
Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 0.11 m²K/W - 2.8 m²K/W
Length: 2,500, 1,250, 2,600 mm
wedi building boards have a blue core made from CFC-free extruded polystyrene rigid foam. This makes the wedi building board an ideal basis for any type of plaster and tile. wedi building ...
Thickness: 15 mm - 75 mm
... suitable for all type of applications CELENIT N/C specific for external insulation covering CELENIT R specific for roofing insulation CELENIT RAB specific for roofing ...
Thickness: 50 mm - 175 mm
... standard. High thermal insulation, high thermal inertia performance in summer conditions, high sound insulation performance and water vapor permeability. The best safety features from the attack of ...
CIRFIBER is a polyester fibre panel made from 100% new polymers processed by fibre thermo-binding.
Thickness: 4 cm - 12 cm
... bitumenous membrane of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 - GT 4 - GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched ...
... has many uses as a structural panel. It consists of an extruded hard foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in the tile adhesive. ...
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
Thermal resistance: 1.9 m²K/W - 6.3 m²K/W
Thickness: 7 cm - 21 cm
Placoplatre
Thermal conductivity: 0.035 W/(m.K)
Thermal resistance: 1.4, 2.25 m²K/W
Thickness: 50, 80 mm
URSA France
Thermal conductivity: 0.022 W/(m.K)
Thermal resistance: 1 m²K/W - 6.5 m²K/W
Thickness: 25 mm - 140 mm
TMS® is a rigid polyurethane (PUR) thermal insulation panel with composite facing on its two faces used for buildings. SPECIFICATIONS Conditions for using of TMS® panels: as ...
... under-tile thermal insulation system for pitched roofs, developed for refurbishment interventions and new roofing. It involves laying modular structural panels, light and consisting of an insulating ...
BRIANZA PLASTICA
Promat TL Board® is a calcium silicate board bonded to Kingspan phenolic insulation and is designed to be fixed to the underside of floors (generally concrete) to achieve specific U-values required by ...
Promat
Thermal conductivity: 0.038, 0.039, 0.048, 0.05 W/(m.K)
Thickness: 80 mm - 200 mm
... circumference Sound-absorbing and vapour-permeable UdiRECO wood-fibre insulation boards are offered as a system solution. Façade insulation Interior insulation Insulating ...
... absorbent and vapour-permeable UdiDÄMMSYSTEME NF Wood-fibre insulation boards are offered as complete system solutions. Areas of application include: Façade insulation Interior ...
... compensation for uneven surfaces. The interior insulation system is the alternative to vapour-proof solutions on the inside of exterior walls. It enables the problem-free installation of interior insulation ...
SIDERISE Nexus Core offers both specifiers and manufacturers a firesafe insulation core with superb integrity, rigidity, flatness and in-built structural performance. • Nexus Core is made from European Fireclass A1 ...
... Stonewool slabs are suitable for a wide range of thermal, acoustic and fire insulation requirements both within buildings and for industry. • Excellent thermal, acoustic and fire insulation performance • ...
Thermal conductivity: 0.039 W/(m.K)
Thermal resistance: 2.3, 1.75, 2.05 m²K/W
Length: 120 cm
ISOVER SAINT-GOBAIN
Thermal conductivity: 0.036 W/(m.K)
Length: 1,200 mm
Width: 600 mm
... Wall DD Slab insulation has been specifically developed for use within external wall insulation systems. Such systems can considerably enhance both the thermal and acoustic performance of a building. External ...
Thermal conductivity: 0.022 W/(m.K)
Thermal resistance: 1.35 m²K/W - 9.05 m²K/W
Length: 1,200, 2,400 mm
IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This ...
IKO
Thermal conductivity: 0.032 W/(m.K)
Thickness: 100 mm - 200 mm
The new standard for inverted roof insulation λ0.032 W/mK Up to 11% improved insulation performance.* Potential for significant thickness savings. Offered in single extruded thicknesses from 100mm ...
Dow France
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining