|
|
A pre-painted steel product is generally composed of three elements: a base layer of steel with a zinc-based coating, a layer of primer and a surface layer of paint called the finish.
The choice of support directly affects the installation of pre-painted steel products and their resistance to corrosion. If the product requires high corrosion resistance, it is best to use a thick zinc layer. Nevertheless, if the part is to be used in works subject to severe deformations, a thinner zinc coating is recommended as it is more flexible and resistant to cracking.
|
|
|
Metl-Span III CFR Roof panel is an insulated metal standing seam roof panel and is the newest innovation in all-in-one composite roof panel design, combining durable interior and exterior faces with Metl-Span's unmatched Blister-Free polyurethane core. The CFR insulated metal standing seam roof panel is a truly unique answer to many deficiencies common with more traditional roofing materials of the past.
|
|
5V-Crimp roof panel system offers an ideal old-time residential appearance. These water shedding panels require a minimum slope of 3:12.
Product Features:
- Coverage Width – 24”
- Minimum Slope – 3:12
- Panel Attachment – Exposed Fastening System
- Panel Substrate – Galvalume® Plus or Galvanized
- Gauge – Standard: 29 Optional: 26
- Finishes – Standard: Smooth
- Coatings – Galvalume Plus®, Signature® 200
|
|
The PBR panel can be used for roof or wall applications. Minimum slope is 1/2:12.
Product Features:
- Coverage Width – 36”
- Minimum Slope – ½:12
- Panel Attachment – Exposed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 26 Optional: 29, 24 and 22
- Finishes – Standard: Smooth Optional: Embossed
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300
|
|
Stormproof® is a roof and wall panel ideal for use for residential, light commercial, farm and ranch buildings, canopies and storage buildings.
Product Features:
- Coverage Width – 36”
- Minimum Slope – 3:12
- Panel Attachment – Exposed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 29 Optional: 26
- Finishes – Standard: Striated Optional: Striated minor ribs
- Coatings – Galvalume Plus®, Signature® 200
|
|
A7 is the original British standard trapezoidal sheet with a profile depth of 38.1mm and a pitch of 127.14mm. It is structurally efficient yet simple and economic to fix.
Rigidal A7 can be used for curved cladding for further information please contact our technical department
Rigidal A7 has a cover width of 890mm and is available in the following standards gauges: 0.5, 0.7, 0.9, 1.2mm.
|
|
Prefabricated Folded Sheets
for Roof an Wall Cladding
Advantages of prefabricated sheets: delivered ready for installation, accurately dimensioned and dimensionally stable.
Easy use of double standing seam and angle seam machines. Straightforward and time-saving construction method.
Prefabricated folded sheets are also available in bright ZINC and the pre-weathered finishes, QUARTZ and ANTHRA.
|
|
|
400sqm SILVER METALLIC ALUCOBOND® - 3D Engineered project for the realization of more than 100 special panels, curved according to the project.
|
|
Out of synthetic rubber, the sealing of the roofings residential, additional, terraces, verandas and garages ensure, in restoration as into nine.
Characteristics:
Neutral for the environment
Excellent resistance to the severe climates
Very good behavior in time
No hot welding
|
|
Snap-On Panels have been designed for use in roofing, mansard and fascia applications. Snap-On Panels are designed to be installed over a waterproofed solid substrate and a minimum 3:12 roof pitch. Snap-On Panels are to be factory roll-formed in continuous lengths. Maximum panel length is 45 feet and minimum panel length is 4 feet.
These panels are ideal for specification on applications where roof transitions are required. The simplicity of the pan design combined with corrective leveling provides superior flatness and allows for greater workability on site.
|
|
Suitable for:
Wide surfaces, low pitch roofs, industrial and residential roofing.
Recommended for:
roofing
Minimum slope:
1 %
Standard production:
aluminium
prepainted aluminium
aluzinc
copper
titan zinc
stainless steel
Options:
Anticondensation felt
Antinoise felt
Technical features:
high load bearing characteristics
installation without perforation of the sheet
warrancy of watertight even in case of complete flooding of the roof
any length (production directly on site with mobile unit)
|
|
Redi-Roof is an architectural metal roofing system available exclusively from Petersen Aluminum Corporation. It is intended for application over a solid substrate with a minimum 3:12 roof pitch. Typical underlayments include plywood, nailboard insulation or equal. Panels are to be factory roll-formed in continuous lengths. Maximum panel length is 45 feet and minimum panel length is 4 feet.
Redi-Roof Panels feature an offset profile which adds strength and allows room for a hex head fastener. The clip, with its button punched design, insures an extra-snug fit. The one-piece design of the Redi-Roof Standing Seam allows for ease of installation.
|
|
Snap-On Panels have been designed for use in roofing, mansard and fascia applicatios. Snap-On Panels are designed to be installed over a waterproofed solid substrate and a minimum 3:12 roof pitch. Snap-On Panels are to be factory roll-formed in continuous lengths. Maximum panel length is 45 feet and minimum panel length is 4 feet.
These panels are ideal for specification on applications where roof transitions are required. The simplicity of the pan design combined with corrective leveling provides superior flatness and allows for greater workability on site.
|
|
|
The Rigidal Lokroll standing seam roofing system features a unique roll locking fixing method which creates a continuous weathertight roof without any through fixings. The interlocking sections fix directly to the supporting structure, concealing the fixings and providing complete protection from the elements.
|
|
Megaroof
The large metal roof covers
Megaroof system is to be considered as one of the most interesting new high technology products that appeared on the Italian market over the last years; this product cancels all the problems linked to elements transportatio, because the metal plates are produced on-site by a mobil production unit
|
|
The Vestis brand is a new family of coated aluminum sheet strips with specific characteristics for roofing and facade applications.
The particularities of these products are:
- long-lasting aluminum alloy with particular resistance to the weather;
- malleability; - coating in CLM.
All strips bear the Vestis brand and are distributed with protective film.
|
|
Ziplok
Rigidal Ziplok is an advanced 'zip-up' standing seam roofing system with outstanding aesthetic properties and performance characteristics. The system creates a continuous weather tight roof that is structurally sound and has excellent resistance to wind uplift. Offering the ultimate in design flexibility. Rigidal Ziplok can be smooth, crimped or concave curved, tapered or wave formed.
|
|
The RIVERGRIP® system is the standing seam metal roof covering for steep roofs.
Thanks to its essential shape, aesthetic, constructive economies and outstanding technical properties, RIVERGRIP® is the perfect balance between technology and appearance.
RIVERGRIP® ensures the full roof water-tightness without any seal or gasket. Its original fixing system allows an incredible installation speed, free thermal moviments and an electric and thermal break between the roof and the below structure.
RIVERGRIP® technical properties put it to the top of range and guarantee a high reliability.
The panels 600mm wide are manufatured in customized continuous lengths both in the factory and on site.
|
|
The flat roof metal covering RIVERCLACK® is the solution, in industrial as well as in civil building, which complies with the latest architectural trends.
Thanks to its essential shape, aesthetic, constructive economies and outstanding technical properties, RIVERCLACK is the perfect balance between technology and appearance.
Riverclack is a concealed fixing standing seam roofing system, worldwide patented by ISCOM, and it’s the result of constant research and testing which have seen it used in pan-European large-scale projects for over twenty years.
Bringing together the structural performance levels of high tensile metals and truly innovative geometry, its unique drainage joint is guarantee of full waterproofing whilst its original fixing system allows an incredible installation speed, free thermal moviments and an electric and thermal break between the roof and the below structure.
The panels 550mm wide are manufatured in customized continuous lengths both in the factory and on site.
|
|
The Slimline® roof panel system offers a sleek contemporary profile ideal for residential applications. This system offers a concealed fastener attachment. Panels must be specified as: "striated" or "striated with minor ribs".
Product Features:
- Coverage Width – 16” and 12”
- Minimum Slope – 3:12
- Panel Attachment – Concealed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 29 Optional: 26
- Finishes – Standard: Striated Optional: Striated minor ribs
- Coatings – Galvalume Plus®, Signature® 200
|
|
This profile panel is a water-shedding system and can be used for roofs and mansards only when installed over a water-proofed solid substructure with a minimum slope of 3:12 roof slope. The roof panel makes complicated transitions without the necessity of unsightly flashings by using transition filler. Slope changes from roof to fascia to soffit are made with one continuous pan and batten. A concealed clip securely locks the batten to the panel while allowing for expansion and contraction.
Product Features:
- Coverage Width %u2013 12%u201D and 16 1/2%u201D
- Minimum Slope %u2013 3:12
- Panel Attachment %u2013 Concealed Fastening System
- Panel Substrate %u2013 Galvalume®
- Gauge %u2013 Standard: 24 Optional: 22, 26
- Finishes %u2013 Standard: Smooth Optional: Embossed
- Coatings %u2013 Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
|
BattenLok® HS is a mechanically-field seamed, high strength structural standing seam roof system. It can be installed directly over purlins or bar joists. It does not require a solid substructure for support.
Product Features:
- Coverage Width – 16”
- Minimum Slope – 1/2:12
- Panel Attachment – Concealed Fastening System
- Panel Substrate – Galvalume®
- Gauge – Standard: 24 Optional: 22
- Finishes – Standard: Smooth Striated Optional: Embossed Striated and Smooth, or Embossed Striated with Pencil Ribs
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
