|
|
STEK is a product manufactured by HABITAT Legno and marketed by Linea Legno.
STEK Structural Element with high “K” thermal coefficient is a component of wood-polystyrene foam mixture, which combines the features of high thermal resistance with mechanical resistance.
|
|
ISOVENT-TOP®ventilated thermal insulators
The system provides thermal ventilation for civil and industrial roofs and, thanks to its sandwich configuration, offers considerable advantages both in terms of living comfort and easier tile laying.
The thermoventilated ISOVENT-TOP® insulator is made up of a shaped sheet of blue sintered expanded polystyrene, alternatively with added graphite (a material complying with EN 13163 standards), placed between a EUROSTRAND OSB panel and a plywood panel using phenolic glueing or a plasterboard sheet using glue with such physical and mechanical characteristics as to make the insulating component stick perfectly to the whole system.
The ISOVENT-TOP system proves to be practical and convenient. Its dimensions and technical characteristics make it similar to ISOVENT, with the added advantage of an exposed intrados. This leads to considerable savings in the laying of materials since we are dealing with a complete roof pack.
|
|
ISOSANDWICH® structural panel thermal insulator
A system used in flat roofs, pitched roofs or galleries. As well as a sandwich panel with a safely threadable surface, it provides a roof with exposed intrados, thermally insulated and ready for further work. The ISOSANDWICH system delivers excellent results thanks to its panel structure and composition.
ISOSANDWICH® structural panels are made up of a EUROSTRAND OSB panel coupled with a three-layer plywood or plasterboard sheet and a layer of insulating material in between. All materials comply with European regulations.
|
|
ELYCOP® is a sandwich pre-fabricated roofing system, insulating and self-bearing, precurved to a fixed radius of 3.30 m.
The modular elements create an opaque roof, diffused shed light interrupted by ELYPLAST® (C496) double-walled skylights.
ELYCOP® is used on pre-fabricated structures with alternating wing-shaped or Y beams, to create a light, dependable and functional roof.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet stainless steel AISI 304 or316. Treatment of inner surface with a special machining of promoting the adhesion of polyurethane.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
- 3 Greek tightening
- wide range of surface finishes
- ideal for roofing
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Mineral fibers
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
|
Self-supporting, insulated and fireproofed façade, as state-of-the-art aesthetic experience %u2013 that is Qbiss by trimo. The modular façade system intertwines the purity of architectural form and complete technical solution
|
|
Trimo added a novelty to the existing, well-established construction systems - panels with hidden fixing or Trimoterm INVISIO, which enables performance of vertical façades.
Façade system combines aesthetical accomplishment with excellent technical characteristics. Simplicity and fast assembly stand out among the properties.
Fixing of INVISIO panels is performed by optimised washing elements and self-cutting bolts. All fixing elements are integrated in a panel joint and they are not visible after the assembly.
The range of application is extremely wide since these panels are suitable for representative, commercial, business and industrial facilities.
Panel form and fixing method are made to hide the fixing spots. Sheet metal on the external side can be made in micro-lined or stair-like form, the internal sheet metal in stair-like or »v« form.
|
|
|
|
|
|
Panels of the Trimoterm FTV family are produced in accordance with the patented production process by the use of lamella technique made of uninflammable mineral wool (A1 in accordance with DIN 4102,EN 1182), which assures the best utilisation of compression, tensile and shear properties of the core. Simultaneously they assure optimal thermal and fire characteristics.
The face of a panel is made of hot galvanised (275g/m2) and painted sheet metal in standard thickness of 0.6 mm and 0.5 mm, which gives a panel strong mechanical resistance, durability and aesthetical appearance of a surface.
External anti-corrosion protection is adjusted to climate requirements. Use of corrosive-resistant materials is possible under severe conditions. During the production process both faces of sheet metal are compactly glued with the core by a thin layer of adhesive (3) that meets high strength and durability requirements.
Advantages:
- Strong fire resistance (30 to 180 min)
- Good thermal and sound insulation,
- High load-bearing capacity,
- Water- and air-resistance,
- Durability and
- Fast and simple assembly.
|
|
Acoustic sound absorbing panels are used for sound damping in internal applications only.
They can be erected as cladding of sound-absorbing cabins, as partition walls and additional cladding on façades and roofs.
|
|
|
|
|
|
%u201CLight marble%u201D a seeming contradiction%u2026
The main problems with using stone stem from difficulties in handling and laying it
and from size limits. The slabs generally used have to be 2.5 to 3 cm thick, on average,
to limit the risk of breakage during laying.
Thickness and high specific weight combine to produce averages weight of between
80 and 90 kg per square metre.
Weight thus limits usable dimensions (it%u2019s difficult to use slabs of over 2m2),
it necessitates complex handling and anchoring systems, requires considerable manpower in the assembly stage and significantly increases the cost of the structure (the building
and mechanical parts) that has to support such loads.
As a result, the market is looking to alternative materials, or artificial marble.
Natural Stone Tech has developed the Phidia panel:
thin slab of marble (from 3.5 to 5 mm) on a structural support (from 5 to 40 mm)
with an overall thickness ranging from 8.5 to 45 mm.
The slab weighs around 20 kg/m2, offers a natural stone facing with a back-panel made of a material that allows for rapid installation (with rivets or adhesive, in frames,
anchored directly to the wall with dowels).
This overcomes size-limit problems.
Phidia makes it possible to obtain slabs of up to 6m2 weighing an overall 120 kg against
the 480 kg of traditional natural stone.
|
|
The Promplan panel guarantees the flat appearance of a façade. Its secret fix system and curving possibilities give haute couture steel buildings an exceptional visual depiction.
It has a 2 side interlocking system.
|
|
|
The Metl-Span CF Architectural wall panel is ideal for high-profile architectural applications. The panels may be installed either vertically or horizontally for maximum design flexibility. Multiple module widths and joint reveals add to the design variations available. Attached with concealed clips and fasteners in the side joint, CF Architectural wall panels provide a beautiful flush appearance.
|
|
| ... products without information |
| |
|
|
|
|
The REPI FIRE panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building.
The REPI FIRE panels present good performance of FIRE RESISTANCE. Submitted to test according to the regulation of the circular 91 of 14.09.61 by authorised institutes, they have obtained classification REI 30 - 45 - 60 - 120 - 180.
The REPI FIRE panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI FIRE panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation goes from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
|
|
All the Mabo panels are produced with the vibrated concrete method; the most evident advantages of this choice lie in the quality of the material (excellent resistance and right to avoid any phenomenon of superficial cracking) and in the possibility of increasing the thickness of the interior insulating layer; the result is the improvement of the insulation of the element.
Regarding the finishing of the panels surface, a long experience in the use of materials, technology and installations brought Mabo to have a so high level of production capacity that can offer a large range of typologies of façades and can comply with the visual and plastic exigencies of many building sectors.
This production ductility permitted the realization of very customized buildings, even though with a repeated basic approach.
|
|
|
|
|
|
The Echo-Ventilate panel allows to reduce the energetic consumption legacies to the ventilation requirements and of cooling of atmospheres, it contributes to realize, and to maintain, conditions of comfort acclimatizes them. Moreover thanks to its characteristic conformation aging of the materials comes reduced the phenomenon dell%u2019, improving the duration and the resistance of the materials. The mechanical performance of the manufatto one is optimized through the creation of a double armor, in the inner shell and external, that it allows to govern the complanarità of the same panel. L%u2019innovativo arranges of armor profile Echo - license B.S. Italy %u2013è a system to chassis to improved adhesion, opportunely integrated with elettrosaldate bed frames and tondini in steel in order to increase l%u2019inerzia of the panel, so as to reduce the bendings in the manufatti ones of great dimensions.
The Ventilated panel Echo is composed from the following layers:
inner part in reinforced concrete with bidirectional ribbings
layer thermal insulation with correspondent incorporated and modeled d´aria room
external part in reinforced concrete that comprises the superficial finish.
All the layers are rendered from the armor profile Echo loyal.
|
|
In the space of a few years, this product formerly considered as banal became a very appreciated facing of frontage, fully finding its place in the current trend of the sober buildings of company and indémodables.
In the same way, the private sector more and more often has recourse to this natural construction material, primarily when he is married with aluminum, glass and wood. CONDECO obtained for this purpose of the aggregates and most recent means dismantling. After the dismantling, the mural walls are stored in our warehouses in order to support the process of drying. As this one plays a big role for obtaining the final color of the walls, CONDECO decided to convert half of its warehouses of production into storage spaces.
|
|
ATLAS Beton S.A. produces panels of prestressed and armed concrete frontage.
ATLAS Beton S.A. ensures transport of its own products and, if necessary, by means of adapted trucks. Concrete satisfied all the environmental classes except for: EE4, ES3, ES4 and EA3.
Standard thickness: 20 and 25 cm
Type of elements sandwich
SW 4/6/10 - PS
The insulation consists of expanded polystyrene of weak density (15 kg/m ³).
Value K of the panel = 0,81 W/m ² K.
Value RC of the panel = 1,23 m ² K/W
SW 5/6/9 - PS
The insulation consists of expanded polystyrene of weak density (15 kg/m ³).
Value K of the panel = 0,62 W/m ² K.
Value RC of the panel = 1,62 m ² K/W
SW 4/6/10 - PIR
The insulation consists of polyisocyanure
Value K of the panel = 0,51 W/m ² K.
Value RC of the panel = 1,96 m ² K/W
|
|
JACKOBOARD® Construction board consists of a closed-cell extruded polystyrene foam core and a protective coating made of special mortar and glass fibre. The construction elements are stable, heat-insulating and extremely durable. As they absorb no water, and tiling is possible directly on the surface coating, they are particularly suitable for kitchens and bathrooms.
* Construction element for interior work
* Special coating on both sides
* Tiling possible directly on the coating
* Perfect for wet rooms
|
|
|
|
