|
|
|
At Kafko, our decorative metal fencing offers you the beauty of traditional-looking wrought iron at a fraction of the cost.
|
|
|
The Décorella III pool fence complies with the NF standard NF P 90 306 concerning protection barriers and represents an excellent quality / price compromise. The Décorella III is made from plasticized galvanised steel, with Ø 8mm vertical wires. A double Ø 6mm horizontal wire is welded at the top on the vertical wires. The panels are fixed to the poles which are either embedded or welded to a plate. Various angles can be obtained using the two part rings supplied. The automatic gate is the only version available. (closing with an automatic door)
|
|
"Decorative" brushed stainless steel
This is one of the materials most commonly used to satisfy the criteria for products with a "designer" look, both for interior (kitchen and bathroom) and exterior (building frontage trim, urban furniture, Diodon, etc.).
It is a modern material and is appreciated for its ability to maintain a clean appearance and its inalterability.
|
|
BABY SECUR Removable Fencing was developed 30 years ago to overcome the shortcomings of tradicional fencing for securing swimming pools areas, addressing the high risk they pose for todlers and pets. In order to do this and to allow at the same time the most unrestricted possible access to the pool and to fit with the surroundings.
Drownings are one of the leading cause of accidental death for children 5 years old and younger. The most common accidents involve unsupervised children that gain access to the swimming pool through doors left ajar, fitted with opening mechanisms they can operate, climbing or passing it through openings. Metal fences also pose an electrocution hazard and can cause cuts and bruises or even more serious traumatisms in the case that children impact them while playing.
BABY SECUR fencing can conform to any shape and can be reinstalled if changes on the deck or patio are made or It can even be taken to a different property for a fracion of the cost of installing a new one.
Because of its flexible nature, the wide accesses and the possibility of removing one or several 5 meter seccions in seconds, they can be fitted much closer to the pool than alternative fencing products. This means not only increased safety for the fence will only need to be opened while the pool is being used, but also frees lots of valuable space for year round use (which is very convenient in the case of small patios)
|
|
Two possible models of fixing:
- Fixing on tube to be sealed (coring or stud concrete)
- Fixing with platinum on support concrete
This option must be taken on the globality of the building site to obtain a uniform height of the barrier. With the turntable, the barrier is higher of 30mm.
Wordwrap of the wicket
In option. The support of fixing of the pillar of the wicket is equipped with a case containing a pivot and its device of automatic return of closing. The case is drowned in the concrete and cover of a metal plate.
|
|
« DU TOIT » FENCING SYSTEM
An original and solid metal fencing system made in 8 mm Ø cylindrical steel bars spaced enough to avoid obstructing the view. The design is original, and fits well into all surroundings.
Du Toit fencing is available in green and white as standard. For a small additional charge, it can also be supplied in the colour of your choice.
Many pool fences are designed in a way that makes it difficult to install them down slopes, or around anything other than a 90 degree corner. Not so the Du Toit fencing system, which can be easily installed up and down slopes, and around awkward obstructions
Du Toit fencing has a Magnalatch® system on the gate as well as being self closing and self latching.
The Du Toit fencing system features a classic, clean design, with the uprights 'finished' with a traditional hooped top. It all helps make sure that the Du Toit fence looks as good in your garden as it does in our brochure.
|
|
ENCLÔTURE® MESH
This fencing has a unique gate and is available in different colours to match the surroundings. It is easy to install and easily removable
The flexibility of the Enclôture® fencing makes it difficult for a child to climb and easier to shut off all points of access. It is soft, so less likely to hurt a child if they run into it by accident. The size of the holes in the mesh and the tension system gives the system excellent transparency and security.
It has a unique gate which is patented, has a self-closing and self-latching system manufactured by the renowned Australian company Magnalatch. This provides peace of mind that the gate has not been left open by mistake.
Its unique gate and fence combination that meets all the AFNOR standards set out in NF P90 - 306. It has been rigorously tested by the Laboratoire National d'Essais (LNE) for private and professional use. It is guaranteed for five years.
|
|
ENCLOTURE® GLASS
ENCLÔTURE VERRE® : THE HIGHEST STANDARD OF FRAMELESS GLASS FENCING IN RELATION TO POOL SECURITY, TERRACING, BALCONIES, WIND BREAKS, STAIRWELLS, PUBLIC WALKWAYS ETC….
New from Enclôture®. ENCLÔTURE VERRE® is a frameless glass fencing system which offers, security, transparency, comfort, and is aesthetically superb.
The ENCLÔTURE VERRE® system is made of a 12 mm toughened or laminated glass with rounded and polished edges sections. The clamps are made from corrosion resistant 316 stainless steel. They are beautifully designed to hold the glass above the ground allowing water to flow underneath.
The gate used for the ENCLÔTURE VERRE® system is also made of 12 mm toughened or laminated glass with rounded and polished edges. It has a in-floor gate operator, a top pivot hinge, and has a ‘’Magnalatch’’ system which operates with a magnetic pull as well as being self closing and self latching. The system is designed to close gradually without any strong impact.
The Enclôture® Verre system for swimming pool protection has been tested and approved by the Laboratoire National d’Essais (LNE) and meets all the standards set out in AFNOR standard NF P90-306, for use in both private and public/communal swimming pools.
|
|
Two possible models of fixing:
- Fixing on tube to be sealed (coring or stud concrete)
- Fixing with platinum on support concrete
This option must be taken on the globality of the building site to obtain a uniform height of the barrier. With the turntable, the barrier is higher of 30mm.
Wordwrap of the wicket
In option. The support of fixing of the pillar of the wicket is equipped with a case containing a pivot and its device of automatic return of closing. The case is drowned in the concrete and cover of a metal plate.
|
|
Fence & Deck Applications
easily add a fence to your pool with the new custom Fence Mounting Clip.
this innovative new component has an easy slide and bolt assembly that
creates a clean finished look.
|
|
Atlantek - Wood and directional stainless
- Type of post: Exotic wood treaty with sleeves stainless 316L
- Type of facing: glass temple transparency 8 Misters.
- Fixing of the facings: directional rings (360°).
- Made uneven possible up to 3 cm per meter.
|
|
Foam - fixed enamelled Steel
- Type of posts: white enamelled steel
- Type of facing: transparent glass tempered 8 mm
- Fixing of the facings: fixed rings (90° or 180°)
|
|
Oceanix - directional stainless
- Type of post: stainless 316L.
- Type of facing: transparent glass tempered 8mm
- Fixing of the facings: directional rings (360°)
- Made uneven possible up to 3 cm per meter
|
|
Standard NF P 90-306 is from now on final.
The Prestiblue fence, which is the offer of Vermigli as regards fence swimming pool, is based on a great experiment of the constraints related to this type of product.
The fence itself is made up of panels length either 1m00 or 2m00, in order to adapt ground as well as possible.
The posts are enamelled aluminum posts, with adjustable fasteners, in order to marry configurations of installation not inevitably simple.
The colors are white or green, because the analysis of the sales shows us that the green is a color to which the customers hold much. All the other colors of the nuancier are also available, in option and with the help of a tiny increase. The installation of the posts is done either by sealing or by use of platinums. If the ground is not perfectly healthy, we recommend sealing.
The wicket is proposed in several versions: individual version, and collective version for intensive use; in all the cases, the automatic recall is included, although the standard gives it like obligatory only for the collective use.
|
|
Rigid barrier AGENA is made up of modules of 1 m or 2 m of width for 1.12 m height. The dislance onïro the ground and the first stringer No should not exceed 100 mm
Its installation is facilitated by a system of aluminum posts, enamelled, prefabricated and equipped with grooves where simply come to fit the plexiglass panels 4 mm thickness.
|
|
Protective system of the basin made up of modules of 3m
prefabricated intended to prevent the access to the pool for the children
of less than 5 years, for a private use.
|
|
The barrier of Pacoha swimming pool is designed to adapt to all shapes of swimming pools, most traditional with most contemporary, and with all the grounds.
A fine barrier and esthetics which comes to supplement the existing range of barriers of swimming pool with stringer continue "Macassar"
|
|
AQUATIC SERENITY security gate for pool barriers , glass and inox 316L, height 1.20 meters , width 1 meter.
Double action handle child proof, closes automatically by spring, key locking system.
|
|
The wicket Prestiblue swimming pool respects standard NF P 90-306. It is intended for a not very intense use.
It lays out out of standard of the option "automatic recall" reserved, lon the standard, with the utility services.
The serrrure proposed out of standard is the lock Magna Latch, with magnetic locking, and which it serrrure the most sold in Australia and in the United States.
It is possible to choose the lock Twist, more conventional, with the elegant design and a great simplicity of operation.
|
|
| ... products without information |
| |
|
The Bollards International Post and Rail Range has all the advantages of polyurethane combined with the strength of steel. These products are particularly suitable for coastal or marine applications where a decorative yet functional barrier is required which resists corrosion from salt-water spray.
|
|
Natural Faber presents its first proposal. It is a new line of products based on naturalness and simplicity of forms, achieving a great expressive richness and, at the same time, functionality and technical responses that make possible multiple designs and different combinations of materials.
This new line of products, created by the brand Trenzametal, consists of functional modular systems ready to be installed that offers rigorous quality and multiple features. These are new concepts for the city applied to the perimeter protection and street furniture.
The barriers are available in two different sizes. They consist of posts: 80 mm Ø and 2mm thick, filled with poliurethane; the ornamental top is made of cast aluminium. And rails made of a pipe 50mm Ø and 1,5 mm thick . The anchor is provided with a root to set into concrete by means of a core drill bit Ø > 60mm.
The surface treatment applied is Duplex System anticorrosion treatment (hot-dip galvanization >80 microns + polyester powder coating) according to the European rule EN 13438. The used materials are: pipe of steel quality S-275-JR, top of Zamak and pipe of stainless steel quality AISI-304.
|
|
-original design
-furniture that is comfortable, functional and very robust
-harmonious integration into all environments
Description :
Steel:
steel furniture with exceptional dual surface treatment:
hot galvanisation or electrolytic zinc-plating + polyester powder coating
Wood:
- wood called "ironwood" or coniferous wood
- surface treatment: water repellent, fungicidal insecticide coating (water based only, with no solvent)
Cast iron or aluminium:
coated with oven-cured polyester powder
Stainless steel fasteners:
stainless steel fasteners that are exclusive to Husson
(anti-vandalism system)
|
|
CITY WAY supplies a line of urban furniture to be used in or around the skateparks TRAFIC WAY for the spectators comfort and resting, and for the general cleanliness of the site: benches, stools, seats, litter bins, barriers, bicycle stands, etc.
These different items have been designed to withstand bad weather, vandalism and skate, roller & BMX wear (figures performed on benches). The structures are in galvanised or stainless steel, bases and containers in thermo-lacquered sheet steel.
|
|
|
Need simple products that can provide a safe environment for spectators and eye-catching graphics for event sponsors? Our printed fencing, barricades and crowd control products serve multiple purposes including sponsor identification and media backdrops.
|
|
Barrier ICS is produced by cutting with the sheet steel laser Corten ép. 8 mm over a width of 80 mm, it are curved and pressed with welding in the center.
A higher stainless steel string glossed ép.8 mm is encased in cuttings of the parts in Corten with invisible weldings.
The barrier is sealed directly in the support thanks to prolongations of 200 mm; the modules can also be juxtaposed and screwed between them for modular compositions uninterrupted.
All components Corten the steel are sanded and treated according to the cycle of oxidation developped at the point by METALCO.
Dimensions 960 mm of width and 1000 mm height.
Design: sjit
|
|
Ideal for sporting events, concert halls, convention centers, police departments and outdoor festivals. Made entirely of galvanized steel, this barricade is incredibly sturdy. Once installed, its unique design permits installation on uneven terrain.
Size: 3' 5" H x 7' 3" L
Weight: 37 lbs.
Gauge: 16
|
|
|
|