|
|
This new popular design element vertically mounts to the façade and gives the architect the opportunity to focus not only on solar control and privacy, but also on the façade’s visual enhancement. Sliding Shutters are manufactured from high quality
materials and are suitable for many different types of buildings. Sliding shutters can be integrated into a project during the early design stages.
SLIDING SHUTTERS
• The fins in the aluminium extruded frame are available in two materials,
aluminium and Western Red Cedar wood
• A variety of 6 fins of different shapes, 5 in aluminium and 1 in Western
Red Cedar
• Finishing options:
- Aluminium frames and fins can be anodized or powder coated in a wide
range of colours
- Western Red Cedar is a durable wood, which can be used untreated or
oiled
• Frames, which form the casing of the shutter and carry the fins, vary in
dimension depending on the wind loads and fin type
• Fins can be applied in either a fixed or an adjustable configuration
• Top and bottom rails, runners and necessary hardware are part of the
system
• Various rail brackets permit easy installation
• Custom fillings:
- Stretch Metal
- Glass
- Fabric
- Perforated sheet |
|
SYLOR shutters are offered for both windows and terrace doors.
They are produced in the designs shown below and may comprise one, two, three or more leaves. |
|
Accessories shape the character of the interior. Fakro roof window
accessories combine functionality and attractive design. Accessories
are split into two types, external and internal.
A wide choice of designs and colours ensures you will find accessories
to match any interior, giving you the scope to de velop the look
and feel you require.
External accessories are fitted to reduce heat from the sun.
Awning blinds and roller shutters reflect the sun, protecting the
interior from excessive and uncomfortable heat gain. Our external
accessories do not reduce the glazing surface area of the window.
The wide range of accessories increases the functionality of the window,
and offers the means to control levels of light, as well as heat
and energy used.
Our window control accessories provide the means to open and
control inaccessible windows without the need for chairs or steps.
Internal decoration
AJP, ARS, ARF, APS
The main function of internal accessories is to enhance the decor of
a loft. The wide range of their types and colours ensures harmony
with the decor of any interior and offers the possibility of creating all
kinds of atmosphere in the loft.
Protection from overheating inside
AMZ, ARZ
The external accessories (external awning blind, external roller blind)
are the best protection from high temperatures and help prevent
overheating on hot, summer days. |
|
SYLOR shutters are offered for both windows and terrace doors.
They are produced in the designs shown below and may comprise one, two, three or more leaves. |
|
The shutters have a slim top and bottom rail mechanism. Completing the system with top runners, bottom runners and end stop, ensures smooth running at all times.
Various aluminium extruded or Western Red Cedar wooden fins are fitted in this frame with Hunter Douglas® proprietary parts. The centre to centre distance between the fins may be varied to achieve the required shade angle or to allow more natural daylight into the building interior. |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
Extrusion-moulded aluminium cavity profile 70/30mm
SHEET METAL
Edged aluminium sheet, 2mm single-edged; riveted at the side, model SL-punched hole: circle (20mm), Right-angled (20 x 20mm), special forms upon request
CORNER JOINT Aluminium corner-angle, double beaded
STRIKE STRIP
Available in T-, rubber and brush seal strike strip; can either be fitted or delivered separately
MEASUREMENTS
Minimum size: width 250mm
height 250mm
Maximum size: width 2000mm
height 3000mm |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
Extrusion-moulded border profile 40/40mm; Optionally with rebated moulding
COVERING Soltis fabric (Polyester, PVC) 92 or 86
MEASUREMENTS
Minimum size: width 325 mm
height 390 mm
Maximum size: width 1800mm
height 3500mm
FUNCTION, APPLICABILITY
Protection against warmth and light irradiation
Non-fading, colour-fast, water-repellent surface |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
Extrusion-moulded aluminium cavity profile 70/30mm
SHEET METAL
Edged aluminium sheet, 2mm single-edged; riveted at the side, model SL-punched hole: circle (20mm), Right-angled (20 x 20mm), special forms upon request
FUNCTION, APPLICABILITY
Protection against warmth and light irradiation. Non-fading, colour-fast, water-repellent surface |
|
Sleeping (rail) of 99 mm
Opening wallet of 36 mm
Possible integration of fixed, directional or stackable blades
Possible variation in French window
Total or partial screening
Pose out of bracket at naked outside
|
|
Interior partition a 80 mm thickness
Amounts and cross-pieces with catch of volume in wallet or frontage
Filling in double wall by panel or glazing
Possibility of integration of blinds between the two glazings separated by 52 mm
Simplicity of implementation
|
|
| From ease of operation to high stability and durability, window shutters made of aluminum offer numerous advantages. They are easy to clean and the surface can, through a powdered-coating, be designed in numerous colors of the spectrum. In addition to the standard model with slats, there are a variety of designing possibilities available through the incorporation of various panels. You can also emphasize your individual style through the use of stay bar panels and decorative metal panels. |
|
Our custom built shutters are made from high quality,
weather-resistant copolymer witha wood-grain finish
They enhance the beauty of your home and
are available in several colors
These shutters are stabilized against ultra-violet rays,
thereby ensuring greater durability and eliminating
the need for maintenance
The custom built shutters have nominal widths and
lengths and can be assembled to fit the exact length
of your windows. (To the nearest inch/2,5cm)
|
|
Our custom built shutters are made from high quality,
weather-resistant copolymer witha wood-grain finish
They enhance the beauty of your home and
are available in several colors
These shutters are stabilized against ultra-violet rays,
thereby ensuring greater durability and eliminating
the need for maintenance
The custom built shutters have nominal widths and
lengths and can be assembled to fit the exact length
of your windows. (To the nearest inch/2,5cm)
|
|
Alu-System-Technik is a leading partner for efficient and successful brainstorming and the development of innovative products in the field of aluminium window shutters.
Through intelligent system technology we have been able to develop folding shutters - the result is a perfectly functioning power transmission concept, which can automate up to 8 leaves per unit (four leaves to the left and four to the right). The unit operates quietly and smoothly, and its components are neatly out of sight. Only the motor box (ca. 70x70mm) and the rails (ca. 30x30mm) are placed over the shutters.
Thorough pre-assembly of the compact unit guarantees quick installation and is available for every model type. We have the only European-wide patent
Advantages of the folding shutter system
> electronic operation with two or four leaves
> delivered as fix pre-assembled elements
> simple cost-saving installation
> available for all model types |
|
The Polygal Hurricane Shutter System is a mid-range cost alternative for home/apartment dwellers who want to rely on a certified hurricane protection system.
Tested & Certified (FBC FL5755)
Allows natural light while protecting windows and doors
Off the shelf components eliminating long order lead times
Affordable and easy to install
Light weight and made from high impact polycarbonate sheet.
Polygal’s 16mmSG sheet and profile system, when fabricated and installed per our published fabrication and installation instructions (attached file below) brings a new dimension to the Hurricane Protection Market. This is a significant advance in the hurricane products market since the sheet and profile systems are “off the shelf” and will not be sold to distribution at additional cost as “hurricane protection.” The pricing for both products will remain at our individual distributors’ standard pricing. Since there is no additional cost to the distributor, the consumer will benefit as well.
|
|
Roller shutter doors are ideal where little room is available for any other type of door system due to the layout of the site.
Delivery vehicles and forklift trucks pass through smoothly and are available in different designs.
The advantages
used for industrial and commercial premises, enclosed parking spaces and garages
secure shop windows and buildings
trim roll-up system saves on space |
|
Roller shutters are elements for sight and sun protection, weather protection, thermal and sound protection as well as for burglary protecion.
The roller shutters are produced in the whole colour and surface programme of Finstral and are also technically adjusted to the window programme. Because of that the good optic and an efficient function is assured in perpetuity.
The roller shutter boxes are executed with thermal insulation jackets and can on request be furnished with special sound insulation vinyls.
Roller shuters steel jackets of PVC an aluminium are available in a wide colour range.
The control can be carried out by strip roller, crank or motor, also with remote control.
The elements of the roller shuters can also be executed with integrated insect screens.
|
|
| S2 window and roller shutter assembly in chestnut-coloured yellow pine; white roller shutter box; roller shutter in PVC |
|
The sash is realized with a circumferential PVC-profile, which is braced by a massive steel profile. The reinforcement is tow to the weld area and caters therefore for a high corner and torsional strength.
The sash is divided in transom profiles, according to its largeness.
The panel elements can be open, mobile and closed slats, available as panels in panel structure and decorative panels.
The mounting can happen dirctly on the masonry, on the window-frame or by stop frame. |
|
STEEL ROLLER SHUTTERS
Tap Up is a new security roller shutter in scratch resistant plastic coated steel, insulated with polyurethane foam.
Tap Up is easy to install and is available in 6 different colours and 3 types of movement: strap, winch and electric motor as well as remote control.
|
|
SECURITY SHUTTERS FOR WINDOWS AND FRENCH-DOORS
To surround one’s home with beauty and protection.
Thanks to the security devices that are typical of Dierre armoured doors, windows and French-doors close against any burglary attempt to then open with style and functionality.
Equipped with the interchangeable MIA block and auto-blocking device, they have the advantage of using the same key which can also be used for other Dierre products such as: the armoured door, the safe, the basement security door, etc. Anthea is also available in the cylinder version. |
|
Windows and shutters
Jalousie window shutter, walnut-coloured Swedish pinewood
|
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
MR-profile 40x30 + L-profile 40x20x3 optional with folding border
LAMELLAE Wooden lamellae from knot-free larch, un-treated, 92x15mm
MEASUREMENTS
Minimum size: width 325mm
height 390mm
Maximum size: width 1800mm
height 4000mm
with vertical middle piece from ca. 1800mm
FUNCTION, APPLICABILITY
Protection against warmth and light irradiation
Non-fading, colour-fast, water-repellent surface |
|
The Blindo Shutter is certified Burglar - Resistant product (Cl.3 Standard UNI ENV 1627/30:2000) guaranteeing ultra-high-level protection for your home.
Large -sized aluminium profiles, meticulousy reinforced through-out, specifically designed accessories and exeptional materials, contrasting brackets, cremone bolt with key, security pins, every single detail has been carefully thought out. The Blindo Shutter is produced to measure, and is available in a range of wood, gothic, Ral and matt Rall colours and effects.
Does not require maintenance.
Technical Information
Extruded aluminium profiles:Alloy 6060
Armour - plating: Frames, shutters and slats with inox steel plate, 4mm Thickness; slats with polyurethane sealer to prevent vibrations.
Accessories and sealing strips: burglar- proof hinges, reinforced corner cleats, burglar -proof brackets, stainless steel bolts, stainless steel strikes, cremone bolt with unified key, third lockin stainless steel, screws in stainless steel, seals in EPDM.
Versions: Blindo, Strong, Light
|
|
Different types of layout
Exclusively at Franciaflex
- 2 times faster installation due to a simplified
assembly system (4 pieces to assemble)
- Free-standing system, no working difficulties
- Fits into limited reentrants. |
|
Elegant and robust
All finishes are possible:
BOARD AND BATTEN SHUTTERS
- 1,2,3 or 4 casements made of assembled extruded aluminum strips (24mm)
- With Z-shaped bars or strap hinges (and dummy straps).
Shapes
- Standard or custom-made rectangular dimensions, possibility to produce quarter round shutters.
Hardware
- Aluminum strap hinges
- Aluminum dummy straps (no Z-shaped bars)
- Romantic window catch in aluminum
- Marseilles or automatic shutter dogs and locking block
- 2 Years Warranty
Colours
- All RAL-Tones are available at the same price with satin or matt finishes.
- Woodlike lacquering available.
- 10 Years Warranty / Qualicoat and qualimarine quality marks.
SHUTTERS WITH FRAME
- 1,2,3 or 4 casements made of assembled extruded aluminum strips inserted in a 33mm thick frame.
- A variety of boards is available: panels with louvers (closed or opened louvers (american louvers), or directional louvers), or full panels (board-and-batten type).
- Possible to combine panels on a 1/3 - 2/3 basis.
Shapes
- Standard or custom-made rectangular dimensions, possibility to produce quarter round shutters.
Hardware
- Square strap hinges in aluminum
- Presto Fix ® for installation on existing pintels
- 2 Years Warranty
Colours
- All RAL-Tones are available at the same price with satin or matt finishes.
- Woodlike lacquering available, as well as two-tone colouring
- 10 Years Warranty / Qualicoat and qualimarine quality marks. |
|
| Whatever the sector of activity or construction site needs, Sapa Building System will present a competitive solution to all standard or innovative demands, may it be commercial or residential projects, large or small, for new build or renovation. |
|
The K60 series, projected to realize shutters with book and packet system, keeps the qualities of the adjustable shutters, satisfying the different climatic and territorial demands.
Series of special sections of KIKAU exclusive production, allow to realize shutter with book system (up to 16 wings) and packet system (up to 6 wings), with the minimum encumbrance. Particular accessories and hardware allow rapid, sure and guaranteed operations in the time. The aesthetics of this model, Original KIKAU, was born from a careful search of dimensions and forms in the respect of the traditional ones in wood. |
|
A robust type of shutters
- Shutters with Z-shaped bars or strap hinges (with dummy straps) and standard bars
- Designed for regular windows and french windows / patio doors 28x100 mm in tubular extruded PVC
- Made of 300x28mm panels and of a 4mm U-profile for the frame finishing
Shapes
- Standard rectangular dimensions and possibility to produce quarter round shutters.
Hardware
- Aluminum strap hinges (and dummy straps for shutters without Z-shaped bars)
- Romantic window catch in composite material or aluminum
- Marseilles or automatic shutter dogs and locking block
- 2 Years Warranty
Colours
- Golden oak (strengthened in galvanised steel), white
- 10 Years Warranty |
|
... see all the products in the category
Shutters
|
|
|
