|
|
PASAMANO is a sign element designed to be installed on stair hand-rails. In anodized aluminium, information is available by touch in Braille and in relief, allowing a strong contrast between the matt aluminium and the black background.
PASAMANO is delivered with a curved shape, and can fit all hand-rails between 40 and 60mm diameter.
MARCAL products have a 10 years warranty
|
|
|
|
|
|
This product can be used for temporary information in a visible area held by one or more 49mm or 25mm square convex holding blocks. These are cast as a single unit consisting of a square or rectangular flat backplate turned at right angles around the edge of the sign to become a visible convex square block at the front. The information can be sandwiched between a selection of plates held between the backplate and the visible front block.
Material: the holding block is cast aluminium. This block holds an anodised aluminium backplate with sand blasted edges and a safety glass front with polished chamfered edges or a PMMA (poly methyl met-acrylate) plate with polished edges to allow the insertion of paper information.
Finishes: aluminium block; natural anodised, either polished, sand blasted or brushed finish.
Information secured by grub screw in centre of the 49mm, or upper edge of the 25mm, visible aluminium front block.
Temporary information; printed on paper with ink or laser jet printer and inserted behind the glass or the PMMA plate.
Fixings: concealed countersunk screw fixings in the rear backplate of the aluminium holding block.
Dimensions: XXmm(w) x XXmm (h) x XXmm (d)
|
|
|
|
|
|
evolutionary descriptive support of interior adapted to the setting of generalized accessibility of the buildings: chain identical displacements continuous and access terms for all. To reach, circulate, receive information whatever its handicap: engine, auditive, visual or mental.
The system full access is the answer marcal to the problems as regards accessibility (ERP or other) following the law of February 11th, 2005 for the chance and equal rights, the participation and the citizenship of the handicapped people. It is the guarantee of a descriptive system in conformity with the law "handicap": safety regulations and of accessibility, information and indication. The full access makes it possible to improve quality of life on the long run thanks to an environment accessible to all. This choice is a sign of respect of all the citizens and is integrated in a logic of sustainable development.
Techniques implemented:
The descriptive systems full access propose a methodology for a simplification of information and advance: system of guidance podotactile, tactile plan of diagrammatic orientation, totem of beaconing, wholesale writing black character in relief, multi-contrasts, materials nonreflective, height of posting, translation in Braille, recourse to ranges of standardized pictograms. For example, the haptic universe makes it possible to explore information thanks to tactilo-kinesthetic perception for the public partially-sighted person and blind man.
www.marcal.fr these products descriptive accommodate the solutions full access with a translation in writing Braille and the use of black big letterss in relief, for the public partially-sighted person or blind man.
|
|
|
|
|
|
This product gives the option of two applications on site and is composed as follows:
Materials: 2 aluminium extrusion 2,5mm thick cut to size.
Clear or color PMMA (poly methyl met-acrylate) plate.
The 2 profil become one product by slide one into the other. assembled this way they are like a clip. The springiness is given by a laminated spring inserted in between the upper part of the 2 profils.
The back profil is fixed to the wall with 2 countersunk screws.
The font aluminium sleeve is specialy designed along the upper and lower edges to hold the PMMA plate, this forms the front face of the sign.
Finishes: anodised aluminium.
PMMA plate; top and bottom with according design to allow it to slip into the aluminium sleeve.
PMMA plate held secure by a 2mm stainless grub screw.
A secret stainless steel screw holds the front profil, making it impossible to slide away from the back profil.
The clip they form gives the possibility to slide any king of document in the lower part of the product by simply exerting a pressure with ones finger on the upper part of the product.
It is possible to completement the product with 5mm thick "U" shaped PMMA document holder that can be slided in the lower part of the product. The front face of the PMMA document holder is then flushed with the front face of the product. I can be screwed with the product or stay detachable.
Temporary information; printed on paper with ink or laser jet printer and inserted behind PMMA plate.
Fixings: concealed fixing countersunk screws.
Dimensions: XXmm(w) x XXmm (h) x XXmm (d)
|
|
safety Glass
This product gives the option of two applications on site and is composed as follows:
Permanent information is located on the lower area of the product.
Material: brushed stainless steel 2mm thick.
Temporary information is located on the upper area of the product.
Material: two plates of safety glass with polished chamfered edges for the easy insertion of the Polyester Paper Sheet. Sheet can be printed by laser or ink jet printer.
Assembly: countersunk screws.
Fixings: concealed fixing stainless steel or rustproof screws.
Dimensions: XXmm(w) x XXmm (h) x XXmm (d)
|
|
|
|
|
|
This product is a total display system from way finding to monoliths including some illuminated components; for permanent and temporary information display.
Materials: extruded aluminium section 2.5mm thick and aluminium plate 2.5mm thick.
PVC (poly vinyl chloride) plate and PMMA (poly methyl met-acrylate) plate.
Finish: natural anodised aluminium. PVC (poly vinyl chloride) is opaque and PMMA (poly methyl met-acrylate) is clear.
To special order only powder coated (RAL colours).
The aluminium section is assembled from two half sections; it presents a rectangular profile with radiused visible corners. The open ends are finished by fitting a flat aluminium plate shaped to the rectangular profile.
Window versions; the clear PMMA windows are fitted with two options either flush to the aluminium or inset behind leaving a recessed edge.
For removal of temporary information the end plate can have a slot cut which will allow easy removal of the window plates; otherwise the end plates can be removed with a torx key.
Illumination of window versions is another option.
The range includes:
Wall hung versions; fixed by structural bondage or secret fix screws on the flat rear face.
Projecting versions; secret fixed to the wall via the flat end plate. Window options can be on one or both sides; illuminated versions also available.
Freestanding versions; on a circular aluminium baseplate. Temporary information window versions are available.
Totem versions; anchored to a concrete foundation by three anchor ties through three holes in an invisible 5mm thick stainless steel plate laser cut to the rectangular profile.
Suspended versions; these are suspended on two stainless steel wires.
|
|
Design Michele De Lucchi con Sezgin Aksu
Koala is a patented sign and communication system formed by a complete line of display units coming in several sizes, that can be combined freely and placed on a support formed by two steel cables. The different connection systems allow maximum flexibility and display installations suitable for all kinds of rooms: shop windows, banks, large showrooms, transit areas, offices, museums, shows and hotels.
|
|
Door symbol woman
codice: HT52 ACS/ACS
Finishes: satin steel inox
Ø cm. 7,7
|
|
Hanging plate SEGNO with end caps
Identification sign
Design: flat modular elements
Dimensions: small-medium-big size
Uses: indoor and outdoor
Applications: wall plate and panel, flag and hanging plate, table plates, on ground post and on oval small post; with or without frame
Materials: anodized or powder coated aluminium plates with plastic end caps, powder coated aluminium frames and plastic corners. Uprights and supports made of anodized or powder coated aluminium, zinced steel with aluminium covering base
Graphics: mainly permanent, pre-spaced vinyl or digital adhesive print; interchangeable graphics on card or paper it also possible. The Clip system can be integrated.
|
|
INTERIOR SIGN SYSTEMS: An interior sign system from DanSign is based on a modular sign system as individuality and easy maintenance is essential in any building. Fundamental principles are high end design combined with flexibility and easy exchange of signs, yet maintaining the graphic design.
DanSign provide consult service towards the architectural and the design community and on turnkey solutions that create a graphic and visual connection with the corporate identity and the environment of a building.
|
|
Pictograms are used to identify the most
commonly required room types.
These are supplemented by inscribable
signs in stainless steel, aluminium or
transparent acrylic.
|
|
INTERNATIONAL WAYFINDING AND SIGN PROGRAMMING SERVICE: As a result of many years’ experience with hundreds of wayfinding projects, DanSign offers a systematic and comprehensive approach to information-gathering which is essential in order to create a good wayfinding solution. DanSign´s mission is to solve complex problems of disorientation. DanSign`s work is comprehensive, analytical, and function-oriented. The firm is committed to the long term, effective functioning of your wayfinding system.
DanSign makes it easier for all users to find their way to, through, and out of confusing facilities. In addition to planning wayfinding systems, DanSign works with clients and designers to help create siteplans, interior designs, graphic design elements (including signs and maps), and operational programs that facilitate wayfinding.
|
|
Signage System | guide
HEWI has developed the new guide signage system to match the lever handle 162 system. Simple, clear, internationally understood pictographs designed by Otl Aicher are used. HEWI uses these pictographs, which are still found in visual communications, for a new, plain and simple signage system with basic square dimensions in polyamide, aluminium and stainless steel.
|
|
SIGNEX proposes many standard elements for the descriptive one with the possibility of personalizing by the addition of colors, logos, of textures, in order to be in perfect harmony with the environment of interior architecture.
Adapted perfectly for the hotel establishments, restaurants, hospital, rooms of spectacle or writing desks, Signex can decline themselves on glasses of security and thus offer all the guarantees necessary.
Its manufacture can be made by single part or great series. A partnership with the best manufacturers of accessories allows an implementation easy and discrete.
|
|
FLORIADE SYSTEM
Commissioned by the Floriade project organisation, and in cooperation with npk industrial design, this system of informative elements and signs was realised and supplied.
|
|
Outdoor showcase SHOW on support
Summarizing signs
Folding opening and powder coated aluminium background
Design: flat showcases
Dimensions: medium-big size
Uses: indoor and outdoor
Lighting system: with neon lamps incorporated into the showcase (only for outdoor showcases)
Applications:outdoor (with protection), indoor (with or without protection), click system; wall system or on ground support
Materials: powder coated structure with protection made of different materials and background made of powder coated or black anodized ribbed aluminium (for Clip moduli), plasicized steel, cork. Anodized or powder coated aluminium supports complete with zinced or powder coated bases
Graphics: interchangeable. Papers or cards can be displayed by using pins or mangets; also suitablefor Clip system; sometimes graphics can be permanent with a pre-spaced adhesive vinyl or adhesive digital print on background or on the crossbar.
|
|
Wall panel WIDE
Area identification signs
Design: convex modular elements
Dimensions: medium-big size
Uses: indoor and outdoor
Lighting system: available
Applications: wall panel, stiff hanging, monolith and single post
Materials: powder coated aluminium structure, zinced or powder coated bases
Graphics: permanet pre-spaced vinyl or adhesive digital print; intechangeable print on card or paper and a front protection
|
|
|
OUTDOOR SIGNAGE: An exterior sign system from DanSign is based on the fundamental principles of high end design combined with creative solutions that goes hand in hand with the corporate identity and the environment of the building and the surrounding areas.
|
|
|
StoneLite® panels make an excellent choice for signage due to their lightweight and flexibility. The panels can be water jet cut or custom engraved to provide unlimited possibilities. In the signs shown, different types of marble, granite, and limestone have been water jet cut and inlayed to form the letters and logos.
|
|
|
Want to provide a simple and cost effective means to promote your message to a large audience? Regardless of the environment, size, material or quantity, indoor or outdoor banners are colorful, effective and provide the advertising solutions you need.
|
|
We'll help you say it your way. Express yourself with custom signs that are built to last. Suitable for hundreds of custom sign uses--business sign, welcome sign, dedication sign, donor sign and age-appropriate signs.
Constructed from rugged 3/4" Permalene® and other sturdy materials, including polycarbonate and steel, which is vandal-resistant and maintenance-free. Available in your choice of color combinations, post styles and many sizes. You can even incorporate text, graphics logos and more!
|
|
| ... products without information |
| |
|
|
see the results for the following category :