|
|
System constructed with composition profile sections, with extruded aluminium outside and wood inside, joined by a PVC profile section that also permits movement in case of non-uniform expansion and provides an efficient thermal break.
Rounded forms, exclusive design and a variety of interior wood finishes offer attractive visual results that respect decor traditions. All components are produced to exclusive TENDER S.r.l. designs with accurately selected materials that are fully tested to ensure only the best functionality, reliability and duration.
|
|
|
Maintenance free extruded aluminum with over 200 color choices on the outside and the warmth of Pine, Douglas Fir, Hemlock, Oak or tropical hardwoods on the inside.
|
|
|
Enjoy the convenience of a sliding door with the beauty and classic profiles of a French door. The Infinity® Sliding French Door features effortless operation and the same durable, low-maintenance Ultrex® fiberglass construction as Infinity windows.
|
|
|
Clean streamlined appearance and consistent effortless performance provide everything you want in a sliding patio door. Integrity doors feature the same durable Ultrex® exterior as Infinity windows and the interior is available in bare pine or with a white pre-finish.
|
|
Sliding Patio Door
-Marvin's Sliding Patio Door delivers unrivaled aesthetics and dependable
performance at an attractive value.
-The Ultrex® sill withstands traffic and seasonal changes, so the door
slides smoothly and operates easily.
-The door features 3" stiles and rails, and elegant harp-shaped handle
and a large glass surface to maximize your view.
-New four-panel OXXO configuration available March 2006!
Standard Features
-Tempered, one-lite insulating glass
-Two-point locking system with Satin Taupe handle
-Oak liner on beige Ultrex® sill
-All wood Brick Mould Casing (wood units)
-4 9/16" (116 mm) jambs
-Bare wood interior
-Vinyl Drip Cap and nailing fin (clad units)
|
|
|
The wood-framed HSW65 System, an exterior, weather-resistant, wood-framed individual panel sliding NanaWall® system, provides the ultimate in versatility and flexibility.
|
|
Suited for large openings and to create a pleasant integration between indoor and outdoor spaces, the wooden sliding windows with aluminium facing are available both in the horizontally-pivoted and the lifting/sliding versions.
Also available with two sashes for both versions, or with four sashes in the lifting/sliding option. With its aluminium facing, available in the Quadra, Soft or Bronzo profiles and a vast range of colours, this product enhances a contemporary look.
The finishing of the wood on the inside can be chosen among different tones of mordanting and paint or, if oak is used, the wood can be sample-brushed or bleached and brushed.
|
|
Suited for large openings and to establish a strong interaction between indoor and outdoor spaces.
De Carlo sliding windows and French windows can be matched with a fixed side sash or with a vertically/horizontally pivoted opening system. Also available: lifting/sliding windows that offer better manoeuvrability, safety and tightness for large openings.
De Carlo sliding solutions can be integrated with remote-control mechanized opening systems and are available in different colours and coatings in the finishes meranti, pine and laminated oak.
|
|
Vertical sliding window.
French door with 58X83
mm section wings and
55x160 mm casing in
Douglas fir
|
|
|
|
|
|
New the flowing "Wood Glass" of Line 68 Design series Squares, is a De product Carl inspired to the most advanced requirements of the architecture and the design. The previewed essence is Rovere with natural finish, the chassis of the fixture - conceived for being installed in a building space opportunely shaped - completely is hidden in the external sight, thus rendering exclusively the glass for the fixed member of the locking visible.
The threshold in wood of the flowing one where it is inserted the guide of sliding of anta the cabinet and the lodging of the glass, also is planned for being placed and installed to of under of the level of stamping, so as to not to hinder the continuity between the inside and the outside. The anta flowing it is a frame that, to complement of the fixed vetrata one, gives back to the fixture an effect of elegant lightness. The flowing "Wood Glass" is available in multiple finishes in the Denergy versions: Denergy Solar, Acustic and Top, in order to guarantee the maximum termo-acoustic performances that connubio between wood and the glass it offers with nature. The flowing one has dimensions 3500×2190 cm., introduces a anta flowing, with opening to right and bassoemissivo glass 44,1 acust.+15 argon+33.1.
|
|
It is a widely tested and extremely reliable design solution. It is a highly reliable window which makes it possible for the weight to be distributed over a surface of 250 Kg. It is ideal for wide spaces with a panoramic view as the Double B sliding system made of aluminium and wood makes it possible to have one (built-in shutter), two and four shutters. Then there is a new possibility the raise and slide windows and doors that disappear inside a frame system called «SCRIGNO».
|
|
| ... products without information |
| |
System constructed with composition profile sections, with extruded aluminium outside and wood inside, joined by a PVC profile section that also permits movement in case of non-uniform expansion and provides an efficient thermal break.
Rounded forms, exclusive design and a variety of interior wood finishes offer attractive visual results that respect decor traditions. All components are produced to exclusive TENDER S.r.l. designs with accurately selected materials that are fully tested to ensure only the best functionality, reliability and duration.
|
|
|
Maintenance free extruded aluminum with over 200 color choices on the outside and the warmth of Pine, Douglas Fir, Hemlock, Oak or tropical hardwoods on the inside.
|
|
AELLE80 STH enables to make “double thermal break” frames by using combinations; thermal break aluminium profiles for the outside and joists in natural solid wood for the inside.
The structural features of this system are the perfect solution to any project requirement. It fits exactly to any building and environmental set and it assures an ideal insulation under even “extreme” climate conditions, therefore by avoiding, especially outside, any maintenance work due to atmospheric agent decay.
The system, complete with thermal break aluminium profiles, solid wood joists, fittings and gaskets enables to obtain windows and French doors with one or more wings, bottom hinged, tilt-and-turn, tilt-and-slide, entrance doors opening in or out and glazings with fixed parts.
|
|
|
The 50 IWood series has been designed for the fabrication of mixed wood and aluminum frames with elevated performance features, combining the elegant appearance of wood with the durability and resistance typical of aluminum sections. The system, sized for a standard groove, (air 12 mm. displacement 13 mm, line 18 mm) allows the installation of commercial accessories from the best brand names and it is also available in the most recent anti-theft version. Special attention has been placed on the mounting of the hinges: ALUK has designed a specific accessory that allows the installation to be exact and durable, guaranteeing the performance of large, heavy frames. The series is completed by profiles for the fabrication of doors opening inside and outside and tit and slide doors.
|
|
|
It is a section bar made of aluminium and wood for the production of windows with two, three and four shutters. Aesthetic beauty, functionality but most of all, advanced technology. This is how a frame initially conceived for thermo-acoustic insulation is transformed into a refined element of the furnishings by giving maximum importance to the element of light. Highly resistant in time and no maintenance required. It is possible to make fixed and extendable door panels by coupling them with the Double B open joint system.
|
|
System constructed with composition profile sections, with extruded aluminium outside and wood inside, joined by a PVC profile section that also permits movement in case of non-uniform expansion and provides an efficient thermal break.
Rounded forms, exclusive design and a variety of interior wood finishes offer attractive visual results that respect decor traditions. All components are produced to exclusive TENDER S.r.l. designs with accurately selected materials that are fully tested to ensure only the best functionality, reliability and duration.
|
|
|
Maintenance free extruded aluminum with over 200 color choices on the outside and the warmth of Pine, Douglas Fir, Hemlock, Oak or tropical hardwoods on the inside.
|
|
|
The WD65 is a top hung folding or paired-panel wood framed system for special applications (such as segmented curve units, center pivot options, various inward/outward panel combinations, etc.) designed to provide an opening glass wall or storefront.
|
|
|
|
|
|
Folding element
Timber - heat-insulated
The SF65 system with a design depth of 65 mm has very good heat insulation properties and is particularly suitable for installation in complex structural geometries. It can be used as a floor-standing or suspended variant. Enjoy the material timber in the form of our SF65 system.
This system provides warmth and cosiness in connection with glass. Thanks to the water-soluble surface treatment, the 3-layer glued timber materials e.g. made of meranti or pine are made weatherproof for years. Slim profiles and a flush-to-surface fittings technology underline the unusual features of this system.
Further possible appurtenances include recessed floor tracks, tilt-and-turn panels for ventilation, special glazing etc.
Special properties
Flush-fit floor track available
Gap ventilation in the floor track optional
With pivot-hung panel for ventilation if required (panel in panel)
Available either as a floor-standing or suspended version
Standard glazing thickness 24 mm, thicker glazing available on request
Panels are folded inwards or outwards
|
|
|
Bring style into your home with a modern twist on a classic. Integrity French Doors are available in a variety of inswing or outswing configurations. Integrity doors feature the same durable Ultrex® exterior as Infinity windows and the interior is available in bare pine or with a white pre-finish.
|
|
AELLE80 STH enables to make “double thermal break” frames by using combinations; thermal break aluminium profiles for the outside and joists in natural solid wood for the inside.
The structural features of this system are the perfect solution to any project requirement. It fits exactly to any building and environmental set and it assures an ideal insulation under even “extreme” climate conditions, therefore by avoiding, especially outside, any maintenance work due to atmospheric agent decay.
The system, complete with thermal break aluminium profiles, solid wood joists, fittings and gaskets enables to obtain windows and French doors with one or more wings, bottom hinged, tilt-and-turn, tilt-and-slide, entrance doors opening in or out and glazings with fixed parts.
|
|
|
The 50 IWood series has been designed for the fabrication of mixed wood and aluminum frames with elevated performance features, combining the elegant appearance of wood with the durability and resistance typical of aluminum sections. The system, sized for a standard groove, (air 12 mm. displacement 13 mm, line 18 mm) allows the installation of commercial accessories from the best brand names and it is also available in the most recent anti-theft version. Special attention has been placed on the mounting of the hinges: ALUK has designed a specific accessory that allows the installation to be exact and durable, guaranteeing the performance of large, heavy frames. The series is completed by profiles for the fabrication of doors opening inside and outside and tit and slide doors.
|
|
|
It is a section bar made of aluminium and wood for the production of windows with two, three and four shutters. Aesthetic beauty, functionality but most of all, advanced technology. This is how a frame initially conceived for thermo-acoustic insulation is transformed into a refined element of the furnishings by giving maximum importance to the element of light. Highly resistant in time and no maintenance required. It is possible to make fixed and extendable door panels by coupling them with the Double B open joint system.
|
|
|
|
