|
|
|
The Calpak Vacuum 160/14 VTN and 200/16 VTN are our latest innovations. They are closed circuit thermosiphonic systems with a vacuum tube collector. The vacuum tubes are equipped in the interior with U shaped copper tubes and aluminum fins that maximize the absorbance of heat.
|
|
|
The model Giga NS Selective, closed circuit complete thermosiphonic system, is available in various sizes and supports (inclined and flat roof). The tank features a big round flange for easy service and its cover is white with high quality plastic cover. The collector is high Selective which is a flat plate single copper sheet absorber, with laser welded copper tubes. The range of Giga NS Selective model extends up to 200 liters combined with 4,4 m2 of collectors.
|
|
|
The model Mark 3, closed circuit complete thermosiphonic system, is available in various sizes and supports (inclined and flat roof). The tank features a big round flange for easy service and its cover is aluminum granulated with high quality plastic cover. The collector is a Sandwich type. The absorber is made of 2 sheets of thick steel (8 mm) with integrated canals, painted in special solar black colour. The range of Mark 3 model extends from the model 125/1.5 with a tank of 125 liters and one collector of 1.5 m2 and ends up to 300 liters combined with 4,4 or 5,1 m2 of collectors.
|
|
|
The forced circulation system consists of a floor standing tank, CPC collectors with vacuum tubes and a solar station with an automatic controller. The kit also includes an electrical resistance, supports for flat and slopping roofs, connection bolts, an expansion tank, anti-corrosive and anti-freezing fluid.
|
|
|
The forced circulation system consists of a floor standing tank, high selective flat collectors and a solar station with an automatic controller. The kit also includes an electrical resistance, supports for flat and slopping roofs, connection bolts, an expansion tank, anti-corrosive and anti-freezing fluid.
|
|
Vitocell cylinders deliver hot water quickly on demand, with only around 1'C of heat loss during a 24 hour period.
Hi-grade stainless steel ensures a long service life and very low heat loss. The large dimensioned heat exchangers reach right to the cylinder floor, to heat the entire water content.
|
|
The SOLAR UPEC comprises gone up, tested and regulated of factory:
- a balloon of 300 or 400 liters,
- a Solar regulation System control,
- a hydraulic station,
- temperature sensors of the balloon,
- a surge tank of 25 liters,
- dielectric connections,
- 30 liters of coolant and antifreeze ready with employment.
For an implementation simple and fast.
It is enough to connect to it provided electric cable and already racordé, with a power supply.
|
|
Characteristics
The solar hot-water heater Mondo 500-3 is a system "Low-Flow" with gravitating drainage. It comprises:
3 solar collectors ecosol 2.32 high performance with tempered glass treated with anti-reflecting layers.
1 tank of 500 liters to two exchangers and possibility of integration of an electrical resistance of 2 kw.
1 Dynasol system which comprises:
1 intelligent electronic regulation "Alef " which controls the system but also measurement the solar profit and indicates it on the screen of the controller.
1 system of positive-displacement pump integrated which ensures the optimal flow in the solar circuit.
|
|
Characteristics
The solar hot-water heater Mondo 300-2 is a system "Low-Flow" with gravitating drainage. It comprises:
2 solar collectors ecosol 2.32 high performance with tempered glass treated with anti-reflecting layers.
1 tank of 300 liters to two exchangers and possibility of integration of an electrical resistance of 2 kw.
1 Dynasol system which comprises:
1 intelligent electronic regulation "Alef " which controls the system but also measurement the solar profit and indicates it on the screen of the controller.
1 system of positive-displacement pump integrated which ensures the optimal flow in the solar circuit.
|
|
Characteristics
The solar hot-water heater Mondo 200-1 is a system "Low-Flow" with gravitating drainage. It comprises:
1 solar collector ecosol 2.32 high performance with tempered glass treated with anti-reflecting layers.
1 tank of 200 liters to two exchangers and possibility of integration of an electrical resistance of 2 kw.
1 Dynasol system which comprises:
1 intelligent electronic regulation "Alef " which controls the system but also measurement the solar profit and indicates it on the screen of the controller.
1 system of positive-displacement pump integrated which ensures the optimal flow in the solar circuit.
|
|
Characteristics
The solar hot-water heater Mondo 500-2 is a system "Low-Flow" with gravitating drainage. It comprises:
2 solar collectors ecosol 2.32 high performance with tempered glass treated with anti-reflecting layers.
1 tank of 500 liters to two exchangers and possibility of integration of an electrical resistance of 2 kw.
1 Dynasol system which comprises:
1 intelligent electronic regulation "Alef " which controls the system but also measurement the solar profit and indicates it on the screen of the controller.
1 system of positive-displacement pump integrated which ensures the optimal flow in the solar circuit.
|
|
COMPACT solar heating system
The COMPACT SOLUTION from SONNENKRAFT optimises performance and consumption and therefore represents the best starting point for making optimum use of the sun's power:
* meets up to 70 % of hot water requirements
* minimal assembly times, just plug-in (to set 500 L)
* perfectly matched components
* simple and reliable technology
* suitable for every house
|
|
ECO solar heating system
The ECO SOLUTION for hot water supply is the best starting point for making optimum use of the sun's power:
* approx. 70 % provision of hot water requirement
* minimal assembly times, mostly ready to plug-in
* matched components
* simple and reliable technology
* suitable for every house
ECO solar heating
ECO-SOLUTION is the ideal solar heating solution for extension and renovation projects:
* solar heating provision in well-insulated houses:
- heating up to 20 %
- hot water up to 70 %
* simple, compact and space-saving system
* integrated hot water heating for up to 6 people
* cost effective backup heating
|
|
The COMFORT SOLUTION from SONNENKRAFT is the optimal solution for everybody who is looking for a powerful and compact solar heating system for backup heating.
COMFORT solar heating system
* solar heating provision in well-insulated houses: heating up to 30%, hot water up to 80%
* fresh, hygienic water via continuous hot water supply (fresh water module)
* minimal assembly times
* compact unit in boiler room
|
|
COMFORT XL solar heating
The COMFORT XL solution from SONNENKRAFT guarantees maximum all-round satisfaction in large scale premises:
* approx. 30 – 70 % provision of hot water requirement
* ideal for additional connection of backup heating and heating swimming pools
* fresh, hygienic hot water thanks to continuous hot water supply (fresh water module)
* high-performance, energy saving solar layer charge
|
|
COMFORT plus solar heating
The COMFORT plus SOLUTION from SONNENKRAFT optimises performance and consumption and is therefore the ideal solution for everybody who thinks the best is just about good enough.
* solar heating provision in very well-insulated houses: heating up to 50 %, hot water up to 80%
* fresh, hygienic water via continuous hot water supply (fresh water module) for up to 3 households
* minimal assembly times
* optimum system performance thanks to stratifier lance system
|
|
MAXI solar heating
MAXI solar heating from SONNENKRAFT with central
buffer tank and decentralised home stations is the
ideal solution for residential buildings or terraced properties and
guarantees maximum efficiency:
* solar heating provision in well-insulated houses:
heating approx. 25 – 30 %, hot water approx. 50 – 70 %
* ideal for integration of solar backup heating
* highest efficiency using two conductor network technology
* high-performance, energy saving solar layer charge
* fresh, hygienic water via continuous hot water supply
|
|
This sophisticated further development of the thousand fold proven Ökocell triple zone tank can be flexibly used and will impress you with its high performance. Due to the high efficiency of the heat exchanger surface area, the H3 uses the flow principle to deliver sufficient fresh hot water of extraordinary quality - every time.
The stainless steel corrugated pipe element with a large heating area replaces the hot water tank. The H3 is best combined with wood, oil or gas heating systems. Treat yourself to this added quality of life and health!
|
|
Features of Fresh water module FWM35
Minimum space take-up: Smallest modular construction possible, no internal piping, hydraulic
and electric “plug and fl ow” installation possible directly at the buffer tank
Increased hygiene: The continuous fl ow ensure 100% fresh service water and
prevents Legionella from forming
Greater convenience:
– Heat insulated design and automatic system ventilation
– Patented temperature regulation with simple hot water temperature preselection for:
– constant hot water temperatures
– rapid reaction times without over- or undershooting the preset dispensing temperature
Lifespan:
– 100% protection against limescale resulting from heat
– High-quality due to maintenance-free components such as gunmetal blocks and
stainless steel plate heat exchangers
Features of FWMZP circulation pump
Greater convenience: instantly available service water – no need for waiting:
• smallest modular construction possible without internal piping • high-quality, heat insulated
design • “plug and play” push-in connection to FWM35 – hydraulic and electric
|
|
Today hot water is taken for granted in every household. Whether for showering, bathing or cooking, the uses for hot water are many and varied. The danger for health which can arise through hot water are considerable and should not be underestimated.
|
|
The ESSENTIAL SUPPLEMENT HEATING HAS YOUR SOLAR INSTALLATION!
The AE.SOLAIRE is an auxiliary module and of regulation for the circuit heating of the solar installations with modulating valve troies ways built-in.
ELECTRIC SUPPLEMENTS FOR SOLAR INSTALLATION
The electric boilers of series AE.SOLAIRE are designed for an installation in supplement on the circuits heatings of the solar balloons.
The AE.SOLAIRE is the pilot of the boiler room managing the contribution of the solar balloon and the electric stages additional.
|
|
Vitrified Interacumulador of a coil with coating. For volumes from 160 up to 930 liters, of only 1 coil. Inner and outer use. Deposit standing up. For facilities of joint use of up to 930 liters with inner interchange.
Solar Interacumulador DESCRIPTION with a coil
CAPACITY 160, 200, 300, 500, 800 and 930 ls
TYPOLOGY vertical Installation. Accumulation ACS
MATERIAL vitrified Steel (DIN 4753)
ISOLATION rigid Foam injected polyurethane
FINISHED OUTER quilted polypropylene Lining detachable
|
|
Epoxy storage cell: For facilities that require important volumes of accumulation with outer interchange.
DESCRIPTION: Solar storage cell without coil
CAPACITY (l): 1000, 1500, 2000, 2500, 3000, 3500, 4000 and 5000
TYPOLOGY: Accumulation ACS
MATERIAL: Steel with epoxy coating of quality
nourishing
ISOLATION: Rigid foam polyurethane injected in mold
FINISHED OUTER: Quilted polypropylene lining detachable
|
|
Solar hot-water heater range domesticates Giorsol
The solar hot-water heater with forced circulation consists from one to three solar collectors, a balloon of storage and a power transfer unit GIORSOL. Traditional, this system uses a liquid antifreeze as coolant to recover the energy absorptive by the sensors and to transmit it via an exchanger, with the balloon of storage.
- Standard solar hot-water heater GIORSOL is very FUNCTIONAL: several indicators of control make it possible to check the good performance of the installation permanently.
- It is FLEXIBLE: Jacques giordano industries proposes a broad range of hot-water heater GIORSOL going from 100 liters to 550 liters, likely to adapt to various configurations: vertical or horizontal sensors, balloons manufactured with an enamelled coating or out of stainless steel.
|
|
|
The solar hot-water heater with forced circulation consists from one to three solar collectors, a balloon of storage and a power transfer unit GIORSOL. Traditional, this system uses a liquid antifreeze as coolant to recover the energy absorptive by the sensors and to transmit it via an exchanger, with the balloon of storage.
|
|
CESI/BALLONS/
Ballon Solaire Doubles Exchanging 200 L
code produces: 1413000400
height: 1585 mm
diameter: 500
volume: 200 liters
weight: 62 kg
conditioning: 1 part/parcel
color: white
|
|
| ... products without information |
| |
|
|
