|
|
The Parans L1 can be suspended flush with a ceiling or pending down with wires. Which solution to choose has both practical and aesthetic considerations. Depending on the ceiling material, different screws and/or plugs may be apporpriate. Make sure that the luminaire is mounted
securely!
|
|
Parans SP2.1 is the second version of the unique and award-winning Parans Solar Panel for transport of sunlight into buildings.
Parans SP2.1 emloys 62 pivot-suspended optical fresnel lenses that follow the solar path and focus incadent sunligth into optical fibers. The optical fibers are bundled into four flexible optical cables that transport the collected sunlight up to 20 meters. Parans SP2.1 can be installed on both roofs and facades which generates a wide range of installation possibilities. The sunlight output from Parans SP2.1 depends
on the sunlight conditions and the length of the fiber optic cables. The light transport is immediate, it cannot be stored and is not transformed. If a cloud passes by for example, the same shadow will be cast indoors and if the sunlight is tinted red in the evening so will the light output.
|
|
Parans L3 is a sunlight luminaire in a spotlight design. Ideal for
highlighting objects and for indirect lighting, using walls and ceilings
as reflectors for the sunlight
The Parans L3 is easy to direct in angles betwen -30° and +30° providing great freedom to adjust and vary the light emission on different objects and surfaces. The 30 mm mineral precision lens emits the sunlight in a 30° angle. Finish: grey powder epoxy.
|
|
|
|
|
|
The solar energy street light uses the highly effective mono crystal(polytropism) silicon sollar cell power supply electricity.Uses the mainte-nance-free seal accumulator cell storing electrical energy.With highly effective green special lamp illumination and uses the advanced sufficient electric discharge and the illumination controi circuit. Has the nature reliability.the luminous high efficiency, brightness big, the installment conventient does not need to lay down the etectric cable , does not need to exchange the electrical energy and the electrical bill. Uses the direct current power supply.photosensitive control.sale reliable. energy conservation economy, environmental proiection, practical (the basis disposes white model is different, Charges one day for a 3-7days use) the life to be long (solar cell to be possible lo use 15-20yeris accumulator cell to be possible to use for 5-7years).
Solar light can be used broadly in lighting of such outdoor sites as family villa.unit garden, civil plaza, environment protection community.
|
|
Adapted to the ways circulated with a regular passage of vehicles. It is generally used to mark out the edges of roads, passages pedestrians, tracks cycle, carparks It is equipped with a condenser (twinkling diodes only) or with a refillable battery for a higher luminous power with fixed diodes (lifespan average 5 years).
Assets: easy maintenance without excavation of the base sealed in the ground. Its lid resembles a traditional nail of roadway and is available in several versions (aluminum polished, aluminum nonpolished, non-skid, anodic aluminum).
Characteristics: Ø 143 mm/Height 80 Misters Saillie except roadway: 3 mm at the ends, 10 mm in the center. Materials: aluminum, polycarbonate, single-crystal silicon. Pressure resistance: 20 tons minimum. Plain or bidirectional, fixed beaconing or indicator, 1 to 2 leds by side. Colors available: blue, white, green, red, amber
|
|
|
Lighting with solar energy BS2 is an advantageous and fast solution for a beaconing of alleys, ways and solid masses. Thanks to its autonomous solar function, it is established anywhere without electric network connection.
|
|
The photoelectric cells store solar energy during the day in a battery. The diodes start automatically as of fallen the night and stop in the small hour. Lighting is planned for one night complete (optimum sunning).
Assets: a microprocessor allowing to control the luminous power of the diodes according to the supplied energy.
Characteristics: Ø 130 mm/Height 1 Mr. Matériau: stainless. Solar collectors on the higher part of foldaway and with 360°. Electronics of management with integrated microprocessor and refillable battery. 2 modes of lighting: normal/energy saving (ex: in winter). 5 leds white (3x0,4W with the level of the diffuser + 2x0,12W directed towards the base).
|
|
Renewable Energy Development
Light fitting of aluminum and glass Eclisse type IP66 IK10 Class III
Light height of 4 metres
Adjustable through 360 °
12 LEDs at 120 lumens per Watt
Shrunk tubular post of treated galvanized steel
Thermo-lacquered finish in choice of RAL colours
Head diameter 90 mm
Diameter at base 160 mm (batteries)
Photovoltaic panel of 100 cm x 70 cm
|
|
The one, management board ActivaSun conceived and made in France
leading-edge technology in the management of solar light allows
to control several parameters:
- Adjustment of the power of lighting on 3 levels/Adjustments of the level of the battery on 3 levels
- Management of the power of lighting according to the consumption of the beach of tension.
- Battery preserved (impossibility of unloading) for one optimized lifespan 5 with 7ans.
- Adjustments of the threshold of lighting and exctinction (in connection with the production of the solar panel)
- Programmable Schedule with lighting.
|
|
|
New solar lighting Sun-26 (Sox 26) uses photovoltaic cells to convert the solar radiation into emectric energy. This energy is emmagisinée in a battery during the day and is restored the night to supply a lamp with sodium vapor.
|
|
Self-powered street lamp with photovoltaic system
- Economical
- Easy to install
- Non-polluting, conforms to Kyoto protocolo
- Easily transported for temporary and emergency lighting
- No electricity bills (Enel)
Advantages
The photovoltaic solar lighting system has several important features::
- It does not require mains electricity supply:
every pole is independent and is no way connected to the others;
- Energy is generated exclusively from sunlight:
it is stored during the day and supplied at night;
- No operator action is required:
once programmed, the electronic control unit turns the system On and Off independently;
- The system is highly reliable:
since it is totally built with solid state components;.
|
|
AZULY supplements its solar aeolian offer by a photovoltaic group. .. . Ready to install! The LED solar mast provides an effective and comfortable bright light. The photovoltaic panel supplies 28 or 56 LED according to model. The electronic management card insures different settings: automatic start, illumination length, periodicity... The equipment height prevents deteriorations.
This monoblock compact group, on one aesthetic concrete mast, is ready to install.
Applications: insulated sites, bus stops, walk ways, school bus operation, technical buildings, waste reception centers, sports fields surroundings, but also rail and waterways network, Condominium parks, parking lots . . .
|
|
|
|
|
|
The new lamppost to solar energy photovoltaic NTH LED-Light, thanks to a new source of light realized with luminous diode valves (LED), marks important carrying out in the systems of independent lighting, introducing levels of yield and reliabilities that appeared ago unattainable till little years, joined to a more and more competitive cost.
The peculiar characteristics of NTH LED-light are the following ones: Light of color WHITE MAN therefore a better perception of the colors and the details from the human eye to illuminamento parity
- Unidirectional Light emission therefore total luminous pollution absence
- Illuminamento of the advanced street plan to that one of a lamp to the sodium to lowland pressure to power parity
- Advanced Duration to any type of lamp to filament or discharge of gas with a average life before an breakdown (MTBF) of approximately 100.000 hours
- Luminous Source adjustable and composed from a high number of independent units
- Insensibilità to the temperature, therefore optimal yield also in the more rigid climates
|
|
|
|
|
|
The solar energy street light uses the highly effective mono crystal(polytropism) silicon sollar cell power supply electricity.Uses the mainte-nance-free seal accumulator cell storing electrical energy.With highly effective green special lamp illumination and uses the advanced sufficient electric discharge and the illumination controi circuit. Has the nature reliability.the luminous high efficiency, brightness big, the installment conventient does not need to lay down the etectric cable , does not need to exchange the electrical energy and the electrical bill. Uses the direct current power supply.photosensitive control.sale reliable. energy conservation economy, environmental proiection, practical (the basis disposes white model is different, Charges one day for a 3-7days use) the life to be long (solar cell to be possible lo use 15-20yeris accumulator cell to be possible to use for 5-7years).
Solar light can be used broadly in lighting of such outdoor sites as family villa.unit garden, civil plaza, environment protection community.
|
|
WIND/SOLAR POWERED STREET LAMP ALBATROS
this is a completely autonomous lighting system which is ecological and economical as it is able to accumulate the energy produced by the photovoltaic panels and a wind generator which continues to produce energy when there is wind even during the night when the photovoltaic panels are unable to work.
The wind/solar powered street lamp ALBATROS is suitable for supplying light to places which would otherwise be extremely difficult or impossible to supply energy to.
ALBATROS is particularly suitable for: isolated streets, car parksroundabouts, lighting on motorways (parking bays, emergency S.O.S. areas), temporary lighting, industrial deposits and ports.
|
|
WIND/SOLAR POWERED STREET LAMP JONATHAN
this is a completely autonomous lighting system which is ecological and economical as it is able to accumulate the energy produced by the photovoltaic panels and a wind generator which continues to produce energy when there is wind even during the night when the photovoltaic panels are unable to work.
The wind/solar powered street Lamp JONATHAN is suitable for supplying light to places which would otherwise be extremely difficult or impossible to supply energy to.
JONATHAN is particularly suitable for: isolated streets, car parks roundabouts, lighting on motorways (parking bays, emergency S.O.S. areas), temporary lighting, industrial deposits and ports.
|
|
|
Tapered cylindrical wooden shaft in glued laminated timber (GLULAM and FSC certifi ed) designed according to the Aubrilam HTE-E process in conformity with EN335, EN386 and EN350, fi nished with three coats of woodstain. Cylindrical base in galvanised steel fi nished in powder coated polyester. Ventilated base. Arm and fork supporting the solar panels in aluminium fi nished in powder coated polyester. Solar panels in poly-cristalline silicon. Electronic regulator with automatic surveillance of lighting intensities (night/day diff erentiation). Programmable built-in timer (lighting evening or dawn). Optimised battery management system. Weatherproof lead batteries with gelled electrolyte, maintenance-free. LED LUXEON InGaN Luminaire with polycarbonate diff user and aluminium body.
|
|
BATTERY CUPBOARD:
Made out of 3 mm thick hot-galvanised plate, with a polyurethane lid.
COLUMN:
Made out of a 4 mm thick DIN 2440 hot-galvanised steel tube, 100 mm in diameter.
SOLAR PANEL SUPPORT:
It consists of a 4 mm thick curved hot-galvanised steel tube, 90 mm in diameter, and a 3 mm thick hot-galvanised plate protecting the rear of the panel.
NUTS AND BOLTS:
In A4 stainless steel.
|
|
|
Fruit of a step of éco-design, floor lamp AUTONOMA is dedicated to the lighting of isolated site. Equip with LED of power which combines luminous performance and energy saving, it is also programmable and intelligent thanks to its presence detector.
|
|
|
|
|
|
A revolutionary road lighting fixture uses the best technologies available to increase safety for pedestrians, while reducing environmental impact.
Designed by Giugiaro Architettura and manufactured by Disano illuminazione, OnOff was launched at Remade, Portugal, the exhibition of high-tech products that are built using recycled and recyclable materials.
The project is part of a number of events promoted by Cestec, a Lombardy-based company created to support manufacturers in the production of excellent products, using environmentally friendly recyclable materials.
OnOff is a lighting fixture specially developed to increase safety for pedestrians and to reduce environmental impact starting from the production stage.
The luminaire is made of aluminium, an entirely recyclable material, whose design combines a pole and a lighting fixture into one single object.
As to consumption, the opportunity to exploit solar power is the most interesting aspect. In fact, a photovoltaic panel is fitted on the lamp cover. That means that OnOff can be powered independently without connecting it to the mains. The batteries provide in any event a five-day run time in the absence of solar radiation.
The photovoltaic system turns solar power into electricity, thanks to the use of semiconductor materials such as silicon, which is reduced to sheets to create photovoltaic cells.
|
|
Daylight received by a solar module fixed at the top of the floor lamp is transformed into electricity. This one is stored the day in the batteries, then is used starting from the twilight to ensure a lighting of 8:00 (optimum condition of sunning).
Luminous power of the projector (3600 Lumens) with for vocation the lighting of security of allotments, carparks, industrial park, isolated bus shelters.
Characteristics:
Height of mast of 5 mêtres. Height of fire of 4 mêtres. Lighting: 25 luxes with the foot of the candelabrum, 2 luxes with 10 Mr. Lampe: SOX 26 W, Sodium low pressure
|
|
The Verdant Walk, Cleveland, OH
Project concept and design by North Design Office for Cleveland Public Art
Photography: North Design Office
The green city of the future shines through this sculptural installation for a Cleveland art park. The park reflects two forces: the city’s heritage of craftsmanship and its new green agenda. We covered irregular forms with flexible, solar-paneled skins; these charge LEDs that glow within the forms at night. The designer asked that our frame look “hand bent”, hence the organic kinks. In winter, the fabric is removed to showcase the metal armatures as sculpture.
|
|
|
The new Solar Street Light HELIOS SOX 26 VARIO is a revolutionary system composed of photovoltaic modules which converts the sunlight into electric power. This energy is stored in a battery during the day and made available in night-time to power a sodium vapour lamp, also thanks to the new intelligent charge regulator GENIUS 15 VARIO. This is the ideal answer when there is the need of lighting squares, streets, crossings and no available electric power grid nearby. The new Solar Street Light HELIOS SOX 26 VARIO typically starts lighting after sunset and stops at sunrise automatically.
|
|
|
|
|
|
Within the framework of its technology EVERLUM® and a partnership with the ADEME, Lumiway developed and developed since 2003, of the whole of lighting to leds patented, supplied with photovoltaic energy, intended for the sites deprived of electrical supply network, or when the establishment of a lighting supplied with the sector would be too expensive.
Units FREELUM®, a height of 3 Mr. 50 to 4 meters, except sensor, equipped with the accessories of production and storage of energy adapt to any environment.
The photovoltaic module composing unit FREELUM®, is selected to ensure the best output under normal conditions of sunning. It is thus important to establish units FREELUM® in places released, directed towards the south and inclined at 45 where 60°.
These photovoltaic units are equipped with a head of Everlum lighting whose patented opto-electronic system comprises 366 leds of 27 candelas, of a sensor from 80 to 85 Watts peak and two solar batteries tight with the lead gelled of 40 Ah each one.
The regulation and the sparing management of lighting are carried out by means of a patented electronic unit.
Photovoltaic units FREELUM® are intended to cover a field of lighting from approximately 9 to 12 Mr. of ray.
On the basis of 366 current leds of 27 candelas, the statement of illumination is approximately 29 luxes under the head of lighting.
Units FREELUM® consist of modular elements whose assembly and connection are carried out on site by competent Companies.
Tariff h.t with the unit and except transport:
FREELUM: qté 1: 5400 - qté 10: 4800 - qté 20: 4690
|
|
Together of lighting with solar energy, Hélios offers an ideal solution
for the zones except electrical communication. Simple or double solar panel,
with adaptable slope. 1 or 2 batteries placed in a careenage in thermoformé ABS. System of electronic regulation programmable.
2 possible types of lighting:
- Body profiled in thermoformé, optical ABS road and clear closing
out of methacrylate; 18 to 42 W Fluo compact.
- Discera 400, cast aluminum body, optical STX minis-R and clear tempered glass closing; 20 W Metal Iodides.
Installation on mast steel Ø 127 mm,
height from 3,00 to 5,50 Mr.
Thermolaquage Ral or Futura, color with
choices, the parts in ABS are always gray.
|
|
The Parans L1 can be suspended flush with a ceiling or pending down with wires. Which solution to choose has both practical and aesthetic considerations. Depending on the ceiling material, different screws and/or plugs may be apporpriate. Make sure that the luminaire is mounted
securely!
|
|
Parans SP2.1 is the second version of the unique and award-winning Parans Solar Panel for transport of sunlight into buildings.
Parans SP2.1 emloys 62 pivot-suspended optical fresnel lenses that follow the solar path and focus incadent sunligth into optical fibers. The optical fibers are bundled into four flexible optical cables that transport the collected sunlight up to 20 meters. Parans SP2.1 can be installed on both roofs and facades which generates a wide range of installation possibilities. The sunlight output from Parans SP2.1 depends
on the sunlight conditions and the length of the fiber optic cables. The light transport is immediate, it cannot be stored and is not transformed. If a cloud passes by for example, the same shadow will be cast indoors and if the sunlight is tinted red in the evening so will the light output.
|
|
Parans L3 is a sunlight luminaire in a spotlight design. Ideal for
highlighting objects and for indirect lighting, using walls and ceilings
as reflectors for the sunlight
The Parans L3 is easy to direct in angles betwen -30° and +30° providing great freedom to adjust and vary the light emission on different objects and surfaces. The 30 mm mineral precision lens emits the sunlight in a 30° angle. Finish: grey powder epoxy.
|
|
|
|
see the results for the following category : 
