|
|
|
|
|
|
After the effectiveness of the new Technical Building Code which states the obligation for all types of buildings to use thermal solar panels to obtain CAS (hot water), Thermochip has developed for all types of roofs, an ideal system, THERMOSUN.
The THERMOSUN kit includes all the components to be able to install your ACS solar collector. It is easily installed on your THERMOCHIP roof as well as on any other type of roof with easy and versatile assembly, as it allows any type of rear covering. The collectors are integrated in the roof thus minimizing the visual impact of the installation thus safely replacing the traditional roof, and all of that is backed by the guarantee offered by THERMOCHIP on its products.
THERMOSUN is made up of a high performance flat collector for vertical and horizontal collection. The self sustaining frame and the rear cover are corrosion resistant aluminum, and it has mineral wool thermal insulation on its rear part. Under the solar safety glass with a thickness of 4mm is a homogeneous once piece copper absorber with Sunselect covering with a highly selective absorption and mechanical fastening for the absorber. The tubing is installed in a winding shape and it is connected via tubular connections with thermal insulation and without a load.
|
|
Solar panels:
- Capture the originating energy of the solar radiation.
- Flat Solar Collectors.
- Existence in the market of Compact Systems (use single-family house and inferior quality).
- Location in shelters or roofings.
|
|
• Complete Package
- Solar Collectors
- Fixing Kit
- Solar Controller
- Pump Station
- Fitting
• Ready to fit out of the box
• Suitable for flat roof and ground installation
• Can be orientated to achieve optimum performance
|
|
- Complete Package
- Solar Collectors
- Fixing Kit
- Solar Controller
- Pump Station
- Ready to fit outside the box
- Single roof kit suitable for popular tile types, inc slate
- 2 panels to be used with 200/250L Primo Twin Coil Cylinder
|
|
- Complete Package
- Solar Collectors
- Roof fixing kit
- Solar controller
- Pump station
- Fittings
- Ready to fit out of the box
- Single roof kit suitable for popular tile types, inc slate
- 3 panels to be used with 250/300L Primo Twin Coil Cylinder
|
|
|
Collector with vertical configuration with high selective absorber of one copper fin laser welded on the copper tubes. The frame is made of anodized aluminum with tempered glass, insulated with 3 cm thick polyurethane lined inside with aluminum foil and outside with aluminum sheet.
|
|
|
Collector with a sandwich type absorber painted with black solar paint in horizontal configuration with aluminum frame anodized, with tempered glass, insulated with 3 cm thick polyurethane lined inside with aluminum foil and outside with aluminum sheet.
|
|
|
|
|
|
The powerful PHOENIX Infinity 3 flat plate collector
The high-tech PHOENIX Infinity 3 flat plate collector will give you years of pleasure because its powerful, full surface absorber gets the best out of the sun. It can be mounted on end or at an angle. The connection positions are also variable, being either on the short side (standard) or on the long side.
Flexible and quick installation on the roof
The collector frames consist of aluminium sections with an integrated and continuous mounting slot (C-section) along the side edges. This gives you considerable flexibility when installing the system on the roof. Heat loss is considerably reduced by the extra thick mineral wool insulation on the back of the collector. The insulation is highly temperature resistant and is made of non-offgassing material.
The collector is covered with special solar safety glass that reduces the reflection losses from the solar radiation. The glass is sealed along the frames with EPDM rubber (double seal) and thus reliably prevents water from penetrating into the collector.
High solar yield through high-performance coating
The heart of the collector is the full-surface absorber with a eta-plus coating - a highly selective, particularly environmentally friendly vacuum coating. The full surface absorber both optimises the collector yield and improves the collector's appearance.
|
|
|
|
|
|
Powerful, durable and even easier to install
Vitosol 200-F flat-plate collectors make an impression with their high efficiency and their attractive price/performance ratio. The Vitosol 200-F flat-plate collector that has been successfully used for many years now, has been further improved; its even lower weight makes it even more easy to install. High quality ensures permanent operational reliability, a long service life and high efficiency.
Long term efficiency
The highly selective Sol-titanium coating efficiently utilises the solar irradiation and achieves a high efficiency. The Vitosol 200-F housing comprises an all round folded aluminium frame without mitre cuts and sharp edges. Together with the seamless weather and UV resistant pane seal and the puncture proof back wall, these features ensure a long service life and long-term high energy yields.
Attractive design, individual colour finishes
Why not integrate your solar collectors into the roof design? Vitosol 200-F can be integral to the roof cover. The edge trims (available as accessories) help to create a harmonious transition from collector surface to roof cover. Upon request, frames are also available in special colours (RAL).
Tailor-made for every demand
With their absorber areas of 2.30 m², Vitosol 200-F flat-plate collectors can be effectively matched to any energy demand. The collectors can be vertically or horizontally installed.
|
|
|
|
|
|
-High-performance solar collectors tested in accordance with EN 12975, Part 2 with maximum energy efficiency. The minimum yield is verified for the subsidy.
-Thermo-formed, highly weather-resistant, aluminium collector trough
-Rock wool thermal insulation, 60 mm thick for minimum cooling loss, TopSon F3/F3-Q also with side insulation.
-Full copper absorber with highly selective coating for optimal yield; meander structure
guarantees uniform flow and effective function in “low-flow mode”
-Expansion compensators between the collectors
-Safety glass 3.2 mm thick, withstands hail in accordance with EN 12975, thermally tempered, TopSon F3/F3-Q with increased light transmission EPDM gasket with one-piece grip bar
-Up to 5 collectors can be connected on one side, the connection side is selectable right/left
-TopSon F3 collector for vertical format, TopSon F3-Q for transverse format
-Collector is self-emptying with “four connection technology”
-High-performance solar collector types F3/F3-Q satisfy the requirements for the “Blue Angel” environmental mark.
-5-year guarantee
|
|
|
Efficient and environmentally friendly: The sophisticated and graceful Weishaupt flat collectors will save you up to 60% of your heating energy. Fitting takes only a few hours
|
|
Solar collector PELLESOL
High quality collector, roof-mounted or roof-integrated
The PELLESOL solar collector is the perfect partner for the ÖkoFEN automatic wood pellet heating system. The collector combines high quality design with complete practically, and is fully certifiedby SolarKeymark.
Specifications
- Copper absorber with highly selective coating
- 2,25m² gross surface area, modular design
- Ideal for integration with wood pellet heating system
- Highly efficient production of hot water: 1.5m² collector area produces
approx. 70 % of the hot water required per person per year
- Max. efficiency 79%, solar absorption 95%, emissions 4%
- Frame is highly insulated
- Manufactured from double-walled, powder-coated, welded aluminium
sections
- Easily-assembled mounting system constructed from aluminium and high quality steel ensures maximum reliability and longevity
|
|
|
Collector with vacuum tubes internally equipped with U-type copper tubes and double fins for higher performance. The CPC reflector, made of highly reflecting aluminum, ensures high efficiency even under the most adverse solar conditions. The header is insulated with fibre glass and polyurethane and finished with black anodized aluminum. Standard size 12 VTN (other sizes from 6 to 16 tubes are available on request).
|
|
|
Collector with vacuum tubes (internally equipped with U-type finned copper tubes) and a flat reflector made of granulated aluminum. The header is insulated with fibre glass and polyurethane in order to withstand high temperatures. These collectors are offered with 12 or 20 tubes.
|
|
High performance vacuum tube collector, which can be installed in almost any position. Individual pipes can be rotated for optimum alignment with the sun.
With a direct flow pattern, the Vitosol 200 is designed to be easily installed in virtually any position and the individual pipes can be rotated towards the sun. The pre-assembled modular design ensures easy handling with short installation times and the flexible double tube connection system enables easy hydraulic interconnection.
Thick borosilicate glass and a permanent vacuum sealed glass-metal joint safeguards long term operational reliability. The Sol-Totanium absorber coating ensures a high level of efficiency.
Three Vitosol 200 models offer absorber areas of 1m2, 2m2 or 3m2. They are all 2,028mm high, with widths of 741mm, 1,450mm and 2,159mm respectively.
|
|
|
|
|
|
Solar thermal collectors VELUX are integrated in any discretion on all the roofs. The use of same connections of sealing as for guaranteed roof windows VELUX an integration made safe in all breeder materials (mechanical roof tiles, roof tiles channel, slates...) and all slopes of roof starting from 15°, as well as a perfect sealing.
Moreover, of the same size than roof windows VELUX, the solar collectors combine harmoniously and in configurations varied with them, so that the roof becomes source of energy and light.
2 solutions of pack balloon to be coupled with solar collectors VELUX:
For the restoration: pack solar balloon VELUX
For the nine: pack solar balloon MG-V ATLANTIC
FEATURES:
Copper absorber covered with a highly selective coating.
Profiled out of dark gray enamelled aluminum.
3 dimensions available (L X H): 114 X 118 (surface of collecting of 1,2 m ²); 114 X 140 (1,4 m ²) or 134 X 180 cm (2,2 m ²).
Certification Solar Keymark and Technical opinion 14/07-1136 opening right to the tax credit of 50%
List solar systems VELUX on the site of ENERPLAN for the attribution of regional aids.
Guarantee: 5 years subject to use of flexible devices VELUX. In the contrary case, the Biennial one applies.
|
|
|
The SI-SOL ST solar collector is a high quality product and the fruit of many years of research, production and use of solar energy receivers. It is distinguished by its simple design, the high quality, durability and low weight of the materials used in its construction, as well as its quick and easy installation. Able to receive diffused radiation and thus emit thermal energy even during cloudy weather, this collector is also highly efficient.
|
|
Length: 1776 mm
Width: 1751 mm
Thickness: 110 mm
Surface: 2.75 m ²
Weight: 55 kg
Guarantee: 10 years
|
|
|
1 square metre solar panel, high-efficiency vacuum pipe. 2 or more panels are connected together .
|
|
The characteristic of vacuum solar collectors is that they have a higher efficiency level in autumn and winter than standard flat
surface collectors; the efficiency of these collectors is lower than flat surface systems in summer. Vacuum collectors are particularly suitable to integrated with low temperature room central heating like wall or floor systems or also for high temperature. The characteristic of vacuum collectors is that they are made of vacuum glass tubes with a high efficiency selective coating; the central part of these tubes’s is entirely of copper.
The basic characteristic of these panels is that they have a curved transparent absorbent surface that allows collectors that are not positioned perfectly towards south to offer the same results as if they were.
|
|
SENSOR with technologies CCS
The sensor consists of a collector on which comes to encase without sealing a series of tubes out of armor-plated glass.
Each tube with technology CCS is a sensor which functions on the most advanced principle of the heat exchanger:
CONDENSATION.
ADVANTAGES:
- reduction of surface of 25%,
- not of inertia,
- voluntary restraint of temperature, for one
perennial installation,
- maximum orientation full southern, the tube swivels
on its axis,
- little catch to the wind,
- guarantee of operation even in case
of accidental destruction of a tube,
- facility of installation,
- weak weight of each component,
- not of mechanical constraint on the tubes,
each condenser having a stainless flexible device.
|
|
| ... products without information |
| |
For the production of hot water, REM has created Techtile Therm, the integrated solar heating system.
Made in the form of complete panels, Techtile Therm is practically invisible and perfectly integrated into the tile roof.
Water is heated using the «vacuum tube» technology as this guarantees high performance and long life. Techtile Therm is ideal for supplying the plumbing and low temperature hot water system: floor systems and radiating profiles.
It is extremely easy to install on the Techtile Basic tiles and stands out for the utmost reliability of the materials both in terms of efficiency and resistance.
Thanks to the use of these elements, Techtile Therm can easily be integrated with the Energy mode, a feature that expands the possibilities for using Solar energy
|
|
|
|
