|
|
Code: ELI.CA 04
Diameter: cm. 180
Finish: plaster and wax
Tread:stained mutenje
Riser: stained mutenje
Railing: Bottom part of staircase with steel handrail and top part with cylindrical balusters curved at the base
|
|
Standard description
Round spiral staircase with steel helicoidal centre pole
wooden tread
steel balusters
round steel newel post
round steel handrail
the wooden parts are in lamelled beech
Optional
Extra balustrade to guard the ceiling hole or gallery
wooden distance rings
special shaped landing
double-width 1st tread (to facilitate the stair's access)
Dimensions
available diameters: from 1000 mm to 2000 mm (every 100 mm: i.e. 1000-1100.. etc.)
suggested risers for diameters from 1000 mm to 1600 mm: from 210 mm to 240 mm
suggested risers for diameters from 1700 mm to 2000 mm: from 195 mm to 220 mm
Other informations
painting for steel parts: powder coating
painting for wooden parts: water paints
suitable for: round - square - rectangular holes - galleries
average delivery time: 8/10 weeks
|
|
This picture shows the solution of combining Acryl Glass and stainless steel. Same could be made in usual glass as well. Advantage of Acryl glass is that it is easier to handle and the price is cheaper.
Just get in touch if you are interested to receive further information about our products or of you want to receive a quotation.
I am sure we can find the right stair for your home.
|
|
Trescalini - Spiral staircase Spiro stainless steel frame and glass stairs, stainless steel railing :
Details :
. central pole in stainless steel or steel
. glass, stainless steel, wood or glass stairs
. railing for Spiro staircase : stainless steel or steel
Trescalini is specialist of high standard contemporary staircases and railing in stainless steel, glass, steel and wood.
|
|
Description
Open staircase with one steel girders
Wooden tread
Steel balusters
Round section wooden handrail
The wooden parts are in lamelled beech
Optional
Extra balustrade to guard the ceiling hole or gallery
Supporting coloumns (if the walls are not solid enough to create extra fittings)
Dimensions
Available width : from mm 500 to 900 mm
suggested risers : from mm 160 to 230 mm
Steps depth: from mm 195 to 240 mm
Other informations
Painting for the steel parts: powder coating
painting for wooden parts: water paints
suitable for: square - rectangular holes - galleries minimal dimensions for ceiling hole 1200x1200 mm
average delivery time: 6/7 weeks
|
|
The sinuous lines and nimble design of the ICE BLEU model convey an
unparalleled sense of lightness.
Available from diam.100 to diam.180. Tempered laminated crystal glass
steps. Satin 304 stainless steel structure.
Railing features diam.12 parallel rods in satin 304 stainless steel.
Satin stainless steel hand rail diam.42
|
|
Round base spiral staircase. Beech wood steps. Stainless steel railing with flat balusters mm.30x5. Rods diameter mm.8. The number of rods can vary from a minimum of 3 to a maximum of 9. Stainless steel handrail d.42.
Available diameters from mm.1000 to mm.2000
|
|
Spiral staircase with step in tempered and stratified glass.
Struttra in stainless steel satinato 304 AISI and railing in steel
inox satinato AISI 304 formed from plates support columns 30x5
tondini diam.8 posizionabili in various ways (possibility of
to insert from a minimum of 3 to a maximum of 9 tondini) and handrail
tubular diam.42 always in satinato stainless steel.
The steps in glass are available in the transparent version of
series or extraluminosity or in several colorations
|
|
|
|
|
|
As a continuation of the concept of the “Collections” – in which the components of a model can be adapted to any kind of layout – we’ve created the Reflex Collection, a new and complete system of staircases distinguished by a combination of materials, solid heartwood, stains and colours enabling the development of products which are always different, so you can personalise your home environment and make it unique and special.
REFLEX LUX consists of a handrail hewn from solid wood, firmly supported by balusters with a circular cross-section of diameter 27 mm, made from stainless steel with a polished finish.
The balusters are connected by seven stainless-steel bars running lengthwise.
The LUX railing can be used on all staircases in the Reflex Collection.
Flight staircases and spiral staircases with a square layout close to walls can alternatively use a handrail fixed to the wall.
The staircase is distinguished by steel supports and transparent polycarbonate spacers to permit height adjustment.
The steps can be made of natural solid beech or ash and have a thickness of 42 mm.
Reflex Lux
REFLEX LUX consists of a handrail hewn
From solid wood, firmly supported by
balusters with a circular cross-section of
diameter 27 mm, made from stainless steel
with a polished finish.
The balusters are connected by seven
stainless-steel bars running lengthwise.
The LUX railing can be used on all staircases
in the Reflex Collection.
Flight staircases and spiral staircases with
a square layout close to walls can
alternatively use a handrail fixed to the
wall.
The staircase is distinguished by steel
supports and transparent polycarbonate
spacers to permit height
|
|
CAYMAN L
THE BELLA DI NOTTE
Spiral staircase with metal/wood rail and solid-wood steps, in lots of different woods. Cayman knows how to transform any space into a corner of prestige. Combining solutions, colours and materials, a one-of-a-kind, inimitable and strong impact object can be created. The warmth of wood in the most fashionable colours and the charisma of chrome and steel give Cayman the appeal that only the most exclusive objects are able to offer.
|
|
|
|
|
|
As a continuation of the concept of the “Collections” – in which the components of a model can be adapted to any kind of layout – we’ve created the Reflex Collection, a new and complete system of staircases distinguished by a combination of materials, solid heartwood, stains and colours enabling the development of products which are always different, so you can personalise your home environment and make it unique and special.
REFLEX LUX consists of a handrail hewn from solid wood, firmly supported by balusters with a circular cross-section of diameter 27 mm, made from stainless steel with a polished finish.
The balusters are connected by seven stainless-steel bars running lengthwise.
The LUX railing can be used on all staircases in the Reflex Collection.
Flight staircases and spiral staircases with a square layout close to walls can alternatively use a handrail fixed to the wall.
The staircase is distinguished by steel supports and transparent polycarbonate spacers to permit height adjustment.
The steps can be made of natural solid beech or ash and have a thickness of 42 mm.
Reflex Lux
REFLEX LUX consists of a handrail hewn
From solid wood, firmly supported by
balusters with a circular cross-section of
diameter 27 mm, made from stainless steel
with a polished finish.
The balusters are connected by seven
stainless-steel bars running lengthwise.
The LUX railing can be used on all staircases
in the Reflex Collection.
Flight staircases and spiral staircases with
a square layout close to walls can
alternatively use a handrail fixed to the
wall.
The staircase is distinguished by steel
supports and transparent polycarbonate
spacers to permit height
|
|
|
Spiral staircases are supported by a centre column in steel covered by wooden or stainless steel spacers. The treads can be produced in wood, glass or acrylic. The balustrade of spiral staircase is available with horizontal bars in stainless steel, the handrail can be supplied in wood or stainless steel. Every stair is adapted to the required measures and layout as well as materials can be chosen.
|
|
An absolute minimum of space but virtually unlimited design possibilities. An attractive staircase enhances the quality of the accommodation all-round.
Spiral staircase made out of wood, steel and stainless-steel.
|
|
|
Spiral staircases are supported by a centre column in steel covered by wooden or stainless steel spacers. The treads can be produced in wood, glass or acrylic. The balustrade of spiral staircase is available with horizontal bars in stainless steel, the handrail can be supplied in wood or stainless steel. Every stair is adapted to the required measures and layout as well as materials can be chosen.
|
|
|
Spiral staircases are supported by a centre column in steel covered by wooden or stainless steel spacers. The treads can be produced in wood, glass or acrylic. The balustrade of spiral staircase is available with horizontal bars in stainless steel, the handrail can be supplied in wood or stainless steel. Every stair is adapted to the required measures and layout as well as materials can be chosen.
|
|
|
This staircase is supported by a central pillar in painted steel, the grades are produced in solid wood on demand. The balustrade could be made with high- grade straps of different number or with panels of glass. The balusters of the balustrade are made of high- grade steel, the handrail could be made on demand of wood or high- grade steel. Every grade is singular, because the grades are adapted to the room- dimension and built in the materials chosen by the client.
|
|
Out of the kitchen and straight to the garden barbecue.
Spiral staircase with stringer, flatbar banister with stainless-steel handrail.
|
|
Round-section spiral staircase in solid wood
Wrapping board H mm. 29 with step fastening from inside, no visible screws
Wooden helical solid newel
Diameter from 130 to 200 cm.
|
|
Round-section spiral staircase in solid wood
Wrapping board H mm. 29 with step fastening from inside, no visible screws
Wooden helical solid newel
Wooden risers
Diameter from 130 to 200 cm.
|
|
Steel spiral staircase
Iron-micaceous enamel painting
Wrapping-line rail thickness 3 mm.
Helical solid newel diameter diam. 245 mm., no visible screws
Steps with "T”- shaped iron frame, tread in solid wood
Diameter from 130 to 200 cm.
|
|
Steel spiral staircase
Iron-micaceous enamel painting
Wrapping-line rail thickness 3 mm.
Helical solid newel diameter diam. 245 mm., no visible screws
Steps with "T”- shaped iron frame, tread in 5/8/5 mm. stratified crystal
Diameter from 130 to 200 cm.
|
|
|
A complete filling or a full or perforated sheet base, or netting comes to fill space between the handrail and the steps; solution often employed for public staircases where one wishes to reinforce the impression of security of the users; a broad choice of models of perforations fear being used.
|
|
The Diable spiral staircase is the protagonist of the most important vertical spaces. Its modem and avant-garde design is covered In shining steel and wood with warm coloured grains to ensure advanced and exclusive home solutions. Solid steps and a banister in chromium-plated rods or steel cables create an élément characterised by perfect structural balance.
|
|
Safety and functionallty in a design which will never go out of date. The metal structure, the level of finishing and the balustrade with cylindrical banisters topped by a solid handrail, in a choice of thermoplastic or reinforced polyurethane, clearly identif y this staircase as a top quality product.
|
|
- A spiral staircase with modular box section, central helical post, made from 8 mm thick painted
- Treads in marble
- Balustrade with uprights in two coupled painted mild steel plates, handrail and rods II. satin finished stainless steel
|
|
Staircases of privative use...
Conceived around one 110 mms in diameter rotation was central is carried out at a rate of 16 steps with the turn;
The helicoid staircase it is often the saving in space:
The "minimum" staircase will find its place in a hopper of 1.30 meter with steps of 50 cm passage; current dimensions fit in hoppers of 1.50 has 1.80 meters;
Comfort for principal staircases is obtained in hoppers starting from 2 meters with passages of 90 cm and more.
|
|
An obstruction minimized for a maximized effect.
This staircase into spiral attracts the eye immediately and gives a seal of modernity and flexibility to space created.
We propose all the alternatives necessary to you to the search for an optimal solution, since the traditional and elegant model until the modern combination of invaluable wood and stainless.
|
|
MATISSE
THE FOUR SEASONS
Wood and metal spiral staircase with round or square design.
Lots of wood shades are accompanied by an elegant railing enhanced by the special wood handrail and the possibility of having coloured or chromed balusters. It is available in 10 different diameters. The essential design and great functionality make this staircase a top-quality product.
|
|
Model: CARLADEZ BOIS/METAL
Helicoid staircase with intermediate bearing. Polished stainless balusters
"Astonishing Imagination of this special realization, marrying two models of staircase in one, brood in its corner living room".
Wood turpentines available: fir tree of North, Pine of France
exotic wood clearly, oak, ash, beech.
|
|
Many things seem impossible, until somebody shows the reverse.
The staircases of the range "Finest Art" set up a new scale of value in the combination of invaluable materials and a work of the wood of very high technicality, to thus create values which will not be with nothing of another similar.
|
|
|
|
