|
|
|
|
|
|
|
A single, extremely flexible tubolar steel structure, covered by a transparent platinic silicone sheath, terminates in a conical shaped diffuser. Inside it a pure aluminium optic realizes a dark light emission and at the same time, thanks to the microperforations present on the lateral surface, enriches the diffuser. The physical characteristics of the tube, and the finish of the sheath that covers it, make for easy orientation of the light in any direction. Materials: Pipe suspension: Diffuser, front lens and rose in transparent polycarbonate. Reflector of pure aluminium. The front optic realizes a dark light emission and at the same time, thanks to the microperforations present on the lateral surface, enriches the diffuser. The physical characteristics of the tube, and the finish of the sheath that covers it, make for easy orientation of the light in any direction. Materials: Pipe suspension: Diffuser, front lens and rose in transparent polycarbonate. Reflector of pure aluminium. The front lens and the diffuser undergo special treatment to prevent ageing from UV rays. Pipe floor base: zamak with black painted finish. Versions: Pipe suspension Pipe orientation of the light in any direction. Materials: Pipe suspension: Ditfuser, front lens and rose in transparent polycarbonate. Reflector of pure aluminium. The front lens and the diffuser undergo special treatment to prevent ageing from UV rays. Pipe floor base: zamak with black painted finish. Versions: Pipe suspension Pipe floor, dimmable. Sources: Compact fluorescent lamps TC-TEL (GX 24-q3) 32-42 W. Emissions: Direct adjustable. Direct dark light (with vertical diffuser).
|
|
|
|
|
|
Fold Collection
Design Enrico Franzolini 2008
Produzione 2008
Fold Collection is a range of lights with lampshades that create optical effects: the diffusers are produced in either stainless steel with a super mirror finish or steel painted with a semi-gloss white finish. They enhance the brightness of the light source when the light is switched on and reflect the natural light in the room when it is off.
In the floor, table and pendant versions, the diffuser is fitted with opaline methacrylate screens inside.
Pendant version
Finishes: diffuser in mirror finish stainless steel with black fabric power cord and chromium-plated rosette or semi-gloss white painted finish with transparent power cord and white rosette.
Sizes: 420 mm, 820 mm and 1300 mm (length).
Light source: The 230V version has 2 33W electronic fluorescent bulbs with E27 base for the 420 mm model, 24W with T5 base for the 820 mm model and 54W with T5 base for the 1300 mm model. The 110V version has 2 30W bulbs with E26 base for the 420 mm model.
|
|
L 60
Saturn
According to a study by Arieh Sharon from the Bauhaus' preliminary-course - Josef Albers at the Bauhaus Dessau 1926.
"en-lighted" by Florian Borkenhagen, 1997.
sheet-steel polished and nickel plated, NIRO-rope,
socket E27 with Globe-bulb Watt
|
|
The PMC Steel Shape Series is one of our most popular lines. All products feature a die-formed curved steel housing for sleek modern look.
Formed on sophisticated presses, this fixture has perforated areas along the length of the fixture for dramatic detail & point source light recognition
All steel shapes fixtures have powder-coated housings, with precision-formed, high reflectance (Minimum Reflectance Factor 90%), enamel reflectors for optimal efficiency. Fixtures are UL listed, and have standard electronic ballasts. Each fixture is lamp-tested at the factory before shipment.
Our ability to form custom lengths and widths allows PMC to produce the fixtures.
|
|
STEPBLOC
Slip-resistant serrated surface with raised perforations.
The upwards-perforated surface with its non-slip design provides a surface which gives superior grip properties that offers the highest safety. The oval-shaped openings permit liquids to run off easily, these openings provide a 37% open area and are sized to prevent a 15mm diameter ball passing through the openings.
Webforge supplies STEPBLOC manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.790m.
|
|
STEPCLAIR
Slip-resistant surface with both upward and downward facing holes.
The downward-perforated holes have a diameter of 18mm, whilst the upward-perforated holes have a diameter of 4.5mm, creating a plank with a 30% open area and aperature sizes that prevent a 20mm diameter ball passing through the openings.
The interplay between the prominent and recessed openings provides a secure foothold and at the same time allows liquids to drain freely off the surface. The STEPCLAIR profile is less aggressive than the STEPBLOC profile and has the advantage of allowing wheeled trollies to be pushed across its surface.
Webforge supplies STEPCLAIR manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.760m.
|
|
STEPBLOC
Slip-resistant serrated surface with raised perforations.
The upwards-perforated surface with its non-slip design provides a surface which gives superior grip properties that offers the highest safety. The oval-shaped openings permit liquids to run off easily, these openings provide a 37% open area and are sized to prevent a 15mm diameter ball passing through the openings.
Webforge supplies STEPBLOC manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.790m.
|
|
STEPCLAIR
Slip-resistant surface with both upward and downward facing holes.
The downward-perforated holes have a diameter of 18mm, whilst the upward-perforated holes have a diameter of 4.5mm, creating a plank with a 30% open area and aperature sizes that prevent a 20mm diameter ball passing through the openings.
The interplay between the prominent and recessed openings provides a secure foothold and at the same time allows liquids to drain freely off the surface. The STEPCLAIR profile is less aggressive than the STEPBLOC profile and has the advantage of allowing wheeled trollies to be pushed across its surface.
Webforge supplies STEPCLAIR manufactured from pregalvanised mild steel and the planks are supplied in a range of different heights, widths and thicknesses with the maximum length of 5.760m.
|
|
- Materials: Steel
- Style: Contemporary
- Origin: The USA (Chicago)
- Design: Kevin Reilly
|
|
The PMC Steel Squares series is one of our most popular lines can be modified with a full range of diffusers and light sources, making it a luminaire to consider for new installations and retro-fit applications.
All fixtures have epoxy powder coated housings, with precision-formed, high reflectance (Minimum Reflectance Factor 90%), enamel reflectors for optimal efficiency. Fixtures are UL listed, and have standard electronic ballasts. Each fixture is lamp-tested at the factory before shipment.
|
|
The PMC Steel Squares series is one of our most popular lines can be modified with a full range of diffusers and light sources, making it a luminaire to consider for new installations and retro-fit applications.
All fixtures have epoxy powder coated housings, with precision-formed, high reflectance (Minimum Reflectance Factor 90%), enamel reflectors for optimal efficiency. Fixtures are UL listed, and have standard electronic ballasts. Each fixture is lamp-tested at the factory before shipment.
|
|
The PMC Steel Shape Series is one of our most popular lines. All products feature a die-formed curved steel housing for sleek modern look. Formed on sophisticated presses, this fixture has perforated areas along the length of the fixture for dramatic detail & point source light recognition
All steel shapes fixtures have powder-coated housings, with precision-formed, high reflectance (Minimum Reflectance Factor 90%), enamel reflectors for optimal efficiency. Fixtures are UL listed, and have standard electronic ballasts. Each fixture is lamp-tested at the factory before shipment.
Our ability to form custom lengths and widths allows PMC to produce the fixtures.
|
|
Sunblok
Umbrellas
Frame in different variations:
- Stainless Steel
- Stainless Steel with LED
- Aluminium
- Teak
- Kempas
Size Ø 3,5 meters or 3x3 meters square
Cover in 16 different colours
Very easy to change the cover yourself, so you can change the colour in your garden every summer!
Colours:
Taupe
Sand
White
Naturel
Black
Pepper & Salt
Red
Orange
Purple
Pink
Yellow
Sea Blue
Lime Green
Navy Blue
Dark Green
Mustard
Umbrellas including protection / night cover
|
|
|
|
