|
|
Maximum thermal power (kW/Kcal) 8/6880
Minimum thermal power (kW/Kcal) 2,5/2150
Performance (%) > 80
Smoke temperature at min. (°C) 120
Smoke temperature at max. (°C) 210
Minimum draught (Pa) /
Hopper capacity (I) 25
Fuel type Pellet Ø 6 mm x 5/30 mm
Hourly consumption at min. (kg) approx. 0,6
Hourly consumption at max. (kg) approx. 1,9
Runtime at min. (h) approx. 25
Runtime at max. (h) approx. 8
Heatable volume (m³) 172/40 - 196/35 - 229/30
Diameter of smoke outlet pipe (cm) 8
Working electric power (W) 60
Electric power upon ignition (W) 270
Supply voltage (V) 230-50
Weight (kg) 130
|
|
Fuel type: Pellet
Hourly consumption at min [kg/h] 0.60
Nominal heat output at max [KW/h] 9,5
Nominal performance [%] 90.00%
Heatable volume [m3] 283
|
|
Pellet heater with air ducting, available in a variety of finishes, will become a stunning centrepiece for your home.
A practical selector allows you to adjust the heat from the front to the back and consequently to heat more than one room.
|
|
A new unexpected aesthetic design, new ways of heating without changing the domestic habitat.
Thermorossi alters the confines between space and function. The heater becomes a work of art to be exhibited, a “piece of furniture” to be placed at will, a picture to be hanged.
|
|
Ecotherm 1000
Small size, high performance pellet heater; it delivers 7 Kw of power, it provides heat to 162m3 of space and its silent operation is hard to beat (36db).
|
|
Maximum thermal power (kW/Kcal) 8/6880
Minimum thermal power (kW/Kcal) 3/2580
Performance (%) 73
Smoke temperature (°C) 250
Minimum draught (Pa) 12
Fuel type Legna/Wood
Maximum hourly consumption (kg) 2,7
Heatable volume (m³) 170
Diameter of smoke outlet pipe (cm) 15
Internal flue pipe section (cm) ø 18 or 18x18
Minimum flue pipe height (m) 4
Fire box dimensions (cm) 30x32xH.46
Oven/compartment dimensions (cm) /
Weight 175
|
|
|
The detailed finish and sleek lines of this model blend easily into the décor of any room in the house. Apply the AIRBOX to gain extra features– ventilation and hot air channelling – for fast distribution of filtered air with the convenience of cooking in a real wood-fired oven at the same time.
|
|
... see all the products in the category
Stoves
|
|
This is a table which becomes large when one needs space for a great banquet but still keeps its details of refinement intact. The structure is solid wood. The band underneath the top is of briarwood. On the top there is a great is a great polychromatic effect: an outer band of cherry-wood, the edge of palisander with little stars and edgings next to a decorative band of briarwood at whose ends two beatiful inlays are inserted. the central part is walnut with a diagonal herringbone pattern. The edge, the thickness and flap ends are of rosewood.
|
|
|
The top of the table with massif wood structure, exhibits a series of briar, rosewood, palisander and walnut fascias with the variety of precious marquetry inlays.
|
|
|
Solid wood structure with inlaid central rosette. When the table is closed, the top is oval; when the half-moons are overturned, a large round top is obtained.
|
|
|
The designer Prof. Leopoldo Carpanelli, with is nephew Architect Giuseppe, has created a piece which, as well as being an extraordinary example of refinement, also has an unusual patented extension which takes nothing away from the beauty of the whole piece. It has marvellous inlays with numerous precious woods.
|
|
|
A large, marvellous table in solid wood structure plated in palisander, myrtle and walnut with rich inlaid filletings. It has one or two panells to be inserted in the centre.
|
|
Extendible table with metal base and eliptical glass top.
Glass finishes: smoked grey, transparent.
Dimensions in centimeters:
Width 140 (185) (230)
Depth 120
Height 75
|
|
Extendible metal table with laminated top.
Top's Finishes: white, black, oak, cement, greywood.
Legs follow the table in length - 12 mm. Thick multilayer laminate top and extensions - 2 extensions are stored in the frame.
Dimensions in centimeters:
Width: 130(180)(230)
Depth: 85
Altezza 73.5
|
|
Our linings fit both masonry and metal supports.
The 20 mm treads are available in timber or fillet wood.
|
|
This new model represents the perfect combination of aesthetically pleasing design and high quality craftsmanship.
The extremely easy assembling system, allows this staircase to fit perfectly to every kind of hole.
The single spine rostrum Tekno is proper for al the constructive typologies, straight, L, U and Q and could be produced in several standard colours, with embossed finishing as aluminium gray and black.
|
|
LASER OPEN SHADE - laser op
The laser model, with its original and charming appeal, fits ideally modern and minimal environments.
The steps are supported by a steel structure, which is available in chromed, glazed inox or epoxy .
Laser Open Shade (picture): Staircase with painted carbon steel structure and treads in Beech wood with finishing process of whitening, Inox steel railing rail with painted uprights and inox steel hand rail. The structure could be painted with special RAL colour on request.
|
|
|
In SNL staircases the hidden step is supported by thin side layers, patented by us, fixed on an ornamental fascia, whose essential line emphasizes the slant of the stair.
|
|
|
KOMODA is adjustable in rise, going and rotation during the installation. This allows, along with the maximum adaptability to the stairwell, rectilinear configurations with one or two corners.
|
|
|
Covered by a worldwide patent, KOMPACT is the only staircase with adjustable rise, going, height, depth and rotation. Its total flexibility allows endless configurations, with 1/4 turn or 2/4 turn (Kompact L or Kompact U) to fit any space.
|
|
Mod Angel Style: staircase with cosciale in lateral wood, side wall.
The part at sight is composed from distances them in stainless steel
Available in various finishes and essences and with rignhiera in stainless steel or metal painted in various colorations
|
|
NATURE HAS ALWAYS BEEN AN INSPIRATIONAL MUSE,
LONGING TO BE CONJURED UP IN EVERYDAY LIFE.
RIVIERA GIVES TANGIBLE PROOF OF THIS
IN ITS REINTERPRETATION OF MATERIALS,
COLOURS AND SHAPES.
Sizes
45x90
45x45
|
|
The Chiaravalle series draws its inspiration from
the designs and colouring of a typical limestone
rock widely used in the Chiaravalle della Colomba
Abbey, found a short way from Piacenza.
The Abbey, built in about the 12th century, originally
had some Romanesque architectonic elements
that were remodelled over the years during
extension work on the building to create the
splendid Gothic cloister used afterwards by the
Benedictine monks.
The rather finely grained yellow stone is variegated
with warm, interesting tones creating a surface
design blending in well with the background colour.
The Chiaravalle series recreates the same colouring
and the delicate structure together with a timeworn
effect giving a charming "antique" appearance to
the whole floor, enhancing its beauty and elegance
|
|
Etruria, classic name referred to the territories in Central Italy spreading from the center located in today’s Tuscany, is the area in which the oldest calcareous stone quarries were located.
Extensively used in the past on account of its easy workability, the calcareous rock has continued to be used till nowadays, with a whole variety of applications for public and private building.
The series Etruria has been inspired by the calcareous stones that used to be cut in layers and therefore it reproduces the typical color softness and slight veining of their unmistakable surface.
Thanks to the unique softness of its surface, Etruria can be easily maintained and excellent wear resistance qualities are guaranteed by its precious glaze. As a result it turns out to be a particularly versatile product offering a wide range of applications for the building of dwelling houses, both in classical modern contexts.
|
|
Lapis Tiburtinus better known as the Stone of Tibur (ancient name from Tivoli) was the Latin denomination for the prized calcareous rock variety now commonly called Travertino.
The use of Travertino continues, allowing for diverse architectural result like the Court of Law at Rome and the New Station at Florence.
Emilceramica took inspiration from various architectural layouts realized using this “Travertino” of italian origin to obtain a ceramic interpretation, thus creating the new range of tiles in fact named Lapis Tiburtinus.
|
|
The “ Pietra Etrusca ” is a gold coloured limestone quarried since the 5th century B.C. in the quarries of the province of Grosseto.
Being extremely easy to work and delicately coloured it was very soon successfully used in the fields of architecture and sculpture, thus becoming the material “par excellence” in Etruscan buildings.
Its popularity can still be found in the archaeological sites of cities like Volterra, Orvieto and Viterbo where amphitheatres, portals and temples maintain their well-balanced and delicate colours from long ago.
Emilceramica, always striving for continuity and searching for natural materials rich in history and culture to rediscover, now revives a fragment of our past after more than two thousand years, reinterpreting it in the light of modern design criteria with an up-to-date and versatile product.
|
|
|
The chipped rock or polished stone flloring have replaced, with obvious advantages, the pressed dirt floors of prehistorical times. This type of flooring is still seen today in some alpine huts or mountain coal miners seasonal shelters: sometimes it extends to the outside, as perimeter siderwalks resulting in a pleasant harmony with the interior. The tiles from the “ Saxa” series provide an ideal solution for offices or villas located within a natural habitat, as well as giving a tone of rustic elegance in city environments.
|
|
GRES PORCELLANATO
CLASSICA
Created by blending pure and natural raw materials.
Each square metre of Coem porcelain stoneware is managed and produced entirely in the production plant at Roteglia: from the storage of the raw materials to atomisation, from sintering (firing at extremely high temperatures) to scrupulous electronic selection. The production cycle is completely computerised and is managed by experts, men who are an authority in the production of ceramics.
Coem porcelain stoneware combines technology and aesthetics in a single product that is ideal for any intended use.
APPLICATIONS: residential, working areas, large public buildings, shops and areas open to the public, industrial areas; ideal for interiors and exteriors.
SURFACES: smooth, polished, flame-effect.
FEATURES: Inalterability and hardwearing, superior resistance (to thermal shock/frost/chemicals), suitable for any intended use, high values of imperviousness (stain resistance and ease of cleaning).
|
|
|
|
see the results for the following category : 
