Surface-mounted detectors

Width: 121 mm
Length: 165 mm
Height: 0 mm

WIRED Anemometer: 4 pulses per rotation Cable lenght: 190 cm Protection rating - IP44

Width: 41 mm
Length: 54 mm
Height: 23 mm

The humidity sensor RFS-DL was developed for control tasks in the air conditioning sector. The new RFSE-DL has an external humidity sensor sitting on an extension of the circuit board, at a length of ...

The device is a presence and motion detector with integrated brightness sensor. The device communicates via KNX. It is de- signed for ceiling mounting.

Wind sensor SunWindControl SC71 For sun/wind control unit SWC62„ Convenient setting of wind threshold values on SWC62„ Adjustable sensor foot for optimum mounting „Universally applicable for exterior ...

... 6m、10m optional/15° Working Voltage DC9-16V Operation Current ≤22mA Operation Temperature -10℃～+50℃ Mounting Type wall mounted Installation Height 2.2m Relay Output N.C./N.O. optional Anti-tamper Switch N.C. Dimension（mm) ...

Wall-mounting movement detector with infrared technology. The detector is rolling and tilting in order to cover the required detection range. Sensitivity and delay time are settable by trimmer. Power ...

... window sensor, the Multisensor Trio consists of a sensor and a magnet. One piece mounts on the door/window frame, and the other mounts on the door/window itself. When the two components separate, the sensor ...

Mechanical door switch DCm Door switch transmits on/off signal to the curtain control system when the doors open or close. Operating temperature range - from -10 to 80oC Protection degree - IP65 Material - plastic Connection ...

... range: 0 – 3000 ppm CO2 Impulse duration: 3.5 s Contact design: 2 x closers, max. 230 V, 0.5 A Protection class: IP30 Surface-mounted plastic housing, white (W x H x D): 78 x 78 x 35 mm Area of application: ...

Dust Sensor 0~500 μg/m³ Ultrafine Dust Sensor 0~999 μg/m³ Co2 Sensor 0~5000 ppm Temperature Sensor -40~+125°C Humidity Sensor 10~95% ...

Operated by infra-red detection, this top-of-the-range detector detects all human movement in the room in which it is installed. It can distinguish human beings from pets (dogs, cats, etc.), thus preventing false alarms ...

The IMQ certification in accordance to the standards CEI EN50194 gurantees the perfect working of these gas detectors. In presence of gas concentration, the alarm spy is lighting, the buzzer emits a loud signal and thanks ...

The VX InfinityTM series provide highly reliable detection functions, reducing false reports or report losses. The VX InfinityTM series deliver stable detection performance even in severe outdoor environments. FEATURES Active IR anti-masking ...

This flush-mounting motion detector is extremely well-suited for placement in small rooms. With a 110° detection angle, this motion detector switches the lighting in these rooms. The time the light remains ...

... compact PIR detectors provide automatic control for lighting, heating and ventilation loads. The PIR sensor can be mounted either flush into a ceiling tile or using a ...

... heaters are needed more quickly than you think. Since managers obviously wish to keep consumption under control, this motion detector is the ideal solution. It "senses" that customers arrive on your terrace and activates ...

... .8m installed at 2.5m height. LED indicator. Incorporates temperature and humidity sensor. Wall Sensor Wall installation. Possibility of several sensors per room. 10m ...

... description One-piece waterproof sensors with motion/vibration detection and open/closed state detection Sensors Motion/vibration-sensor Open/closed-sensor< Connectivity specifications Wireless ...

100% Wire-Free Pet Immune Passive Infrared (PIR) Motion Detector Must be paired with the A1 With a compact and sleek design, the T1 provides 100° wide-angle coverage with fewer false alarms due to smart detection. State-of-the-Art ...

Bi-directional transceiver (prevailing RX) for security system. 868Mhz Fm. Normally closed input or 8,2K resistive input

The WAPIR is a ceiling mounted 360o PIR motion sensor. The WAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene ...

... device, operational efficiency is improved. Each sensor has an in-built microprocessor, allowing logical functions to control one small room, the floor of a building, or an entire building. All sensors ...

features Sensor (light) ceiling mounted The light sensor measures the daylight entering the room Installation: surface-mounted on ceiling For ...