|
|
Country Classic Plank
48" x 6" x 1/2"
The visual of our 6" X 48" HomeStyle Country Classic Ceiling Plank is wider than Heritage Plank for an even greater country rustic look. These easy-to-install planks come in white or you can paint or stain them for the style you're looking for. Apply it directly to the ceiling with furring strips or adhesive.
This Armstrong residential ceiling tile contains recycled post-consumer and post-industrial products.
|
|
|
|
|
|
DESCRIPTION
The metallic false ceiling which can be made with Atena series AC staves combines the continuity of the final, gap-free appearance of the product with the advantage of handy snap-in installation on the crosspiece.
TECHNICAL SPECIFICATIONS
Metallic false ceiling made with Atena staves type AC (with longitudinal ribs) obtained by profiling from aluminium strips with a thickness of 0.5/ 0.6 mm or from steel strips with a thickness of 0.5 mm. These staves with a width of 85/135/185 mm and with closing filler with a width of 15 mm will have rounded edges of the length which is best suited to the location. The staves are to be attached to the steel support crosspiece, which is either painted dark brown or galvanised. Suspension of the crosspieces from the ceiling is by means of stiff suspension wires Ø4 which can be adjusted by springs. On the edge, an edge profile will be applied, with an L-shaped, double L-shaped or C-shaped section and in the same colour as the staves. The false ceiling can be soundproofed by installing on the back of the perforated staves a mat of fibreglass or rock wool enclosed in heatsealed polyethylene containers.
|
|
Define a variety of unique looks along the ceiling with our screen ceiling systems. These systems mask the plenum, allow access to sprinklers, lights and diffusers and lend themselves to a variety of design options. Several carrier and T-bar systems
make it easy to create patterns and a wide colour range ensures that if you can imagine it, you can build it.
Linear screen ceilings use vertically hung panels to create the impression of a floating
ceiling. The unique look of this system can be further enhanced by incorporating V100/V200 Deco to the screens.
• Panel heights in 100 or 200 mm in lengths up to 6 m
• Module 100, 150 or 200
• Attachment of V100/V200 Deco in wood or Aluminium
|
|
|
The " I-30 / I-30B BOX STRIPS" is an ideal solution for project requiring perspective and aesthetic performance of high level. The designer, with this extremely versatile product, can realizeopen or insulated suspended ceilings, with the guidance of listels on levels of desired angularity. The shutter can be also closed with contrast colour effect by using the closing profile PIC 25 with overlap the carrier.
|
|
PROMETAL® metal strips can be employed to decorate or renew, to create screens or partitions, to build functional internal or external spaces etc.
The creative possibilities of our droducts allow the designer to obtain free and different configurations of the false ceilings, thanks to the various type of sections and wide range of colours.
|
|
OWAtecta®-Linear panels in galvanized sheet steel (Front side with stop cams) Powder coated similar to RAL 9010
Quick availability
No set up charges
Packed in 8 pieces
Available perforations
Following perforations relate to the system S 36 L - linear
|
|
LYSAGHT TOPSPAN® 22 ceiling batten is an economical alternative to timber battens. Made from high tensile steel LYSAGHT TOPSPAN® 22 battens are lighter than timber battens and nest together for easy transport and storage.
- High strength and light weight
- Won't shrink warp, twist or burn
- Compatible with all popular domestic ceiling boards
|
|
|
The suspended ceiling in strips "serie 0", fast to lay down and easy to control, allows designer to personalize interiors by choosing among different modules and a full range of colours. Strips "serie 0", with rounded edges, are made of prepainted and used in modular suspended ceilings with open shutter. Each modular element can be unhooked from its carriers and allows full accessibility for sevices maintenance. The shutter can be also closed with contrast colour effect by using two different closing tiles: PIC 15 with overlap between the strips, or PIC 25 with overlap on the carrier.
|
|
VM ZINC® facade applications began as an extension of the building envelope from the roof down to the walls. The first technique used was standing seam, but now, in order to meet architects' demands,
VM ZINC® has developed innovative systems which use all the material qualities of zinc: long-lasting, malleable, flexible, aesthetic and prestigious.
Today, VM ZINC® offers a range of systems supplied with preformed finishing accessories produced specifically for covering facades in the service and residential sector, for both new construction and renovation.
|
|
The LINEAR System by PROMETAL® is an exterior façade finishing system based on strips mounted on a load-bearing structure comprising carriers secured to existing walls.
This particular type of facing means that various compositional solutions can be achieved by exploiting the possibility of vertical, diagonal or horizontal strip installation techniques.
|
|
RHEINZINK® -Horizontal Panel
Horizontal panels looks similar to reveal panels and are reminiscent of wooden façades. With a marginal profile on both edges, components are mounted indirectly with a special RHEINZINK-bracket profile, with a strictly defined 20 mm groove. Linear expansion due to changes in temperature can be accommodated, thanks to this technique.
|
|
Continuous Louvre System with 34mm blade
The CLS-system can be fitted to an existing construction and is supported on vertical mullions.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 34mm.
- Blade height: 39mm.
- Visual free area : 68%.
- Availible with different mullions.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Ready made or bar length
- Different types of mullions with 14,5mm, 50mm or 80mm depth.
|
|
Continuous Louvre System with 65mm blade
The CLS-system can be fitted to an existing construction and is supported on vertical mullions.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 65mm.
- Blade height: 67mm.
- Visual free area : 78%.
- Availible with different mullions.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 %u2013 80 micron.
Manufacture
- Ready made or bar length
- Different types of mullions with 14,5mm, 50mm or 80mm depth.
|
|
Continuous Louvre System with 75mm blade
The CLS-system can be fitted to an existing construction and is supported on vertical mullions.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 75mm.
- Blade height: 92mm.
- Visual free area : 83%.
- Availible with different mullions.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Ready made or bar length
- Different types of mullions with 14,5mm, 50mm or 80mm depth.
Fixing
- Depending of the construction and project details.
|
|
Continuous Louvre System with 95mm blade
The CLS-system can be fitted to an existing construction and is supported on vertical mullions.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 95mm.
- Blade height: 110mm.
- Visual free area : 83%.
- Availible with different mullions.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 %u2013 80 micron.
Manufacture
- Ready made or bar length
- Different types of mullions with 14,5mm, 50mm or 80mm depth.
|
|
One of the jewels in our range is the Hairplan 300 as it provides the ability to have façades that are completely flat. Its secret fix system emphasizes the flatness and sets your façades off to a T. This product can be used single or twin skin.
Hairplan 300 is a secret-fix, flat façade designed for premium applications where flatness, sharp joint lines and distinctive colour options are desirable features. A site assembled interlocking system makes the panels easy to apply and erect and the panels can be fitted both vertically and horizontally.
|
|
| ... products without information |
| |
|
This countryside family house features a modern interpretation of the façade. The façade is a combination of a classical plaster material and wood. The cube like house is unique because of its wooden elements that have a double purpose: they define the edges of the volume and offer a line between the exterior and interior in the direction of the garden.
|
|
|
Wood is the primary link with nature. When it surrounds us, it relaxes us and stimulates vital functions with its vivacity. The façade cover of the object stresses the purpose of interior rooms, where the small changes of every user constantly take place: the object is meant for relaxation, recreation, wellness program.
|
|
The new extension of the conference hall with service spaces is located in the interior atrium, the centre of a set of existing buildings of one of the largest medical charity foundations in the world, located in the natural park Wetlands, which spreads over an area of 6.1 hectares.
Wood, as the basic element, used for the structural elements, larch wood facade, roof and the interior, represents the basic concept of operation of the corporation, i.e. maintenance of a natural ecosystem. In the building’s exterior envelope, it forms a vertical rhythm and contrasts the glazed surface of the existing composition. The raster concludes with the end of the building and runs on as a green roof. The building is naturally lit through specially designed windows of rectangular forms and roof domes, offering an additional light source.
|
|
|
The object at the foothills of Šmarna gora returns the nature its primary feature, which we miss so much in the construction of single-family houses. The façade cover is composed of wooden frames in the syncopated rhythm: wide and narrow, opening up on the southern lamella and offering a view to the construction of the object thus emphasizing the third dimension of volume.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
Continuous Louvre System with 50mm blade
The CLS-system can be fitted to an existing construction and is supported on vertical mullions.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 50mm.
- Blade height: 67mm.
- Visual free area : 78%.
- Availible with different mullions.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Ready made or bar length
- Different types of mullions with 14,5mm, 50mm or 80mm depth.
Fixing
- Depending of the construction and project details.
|
|
|
|
|
|
RHEINZINK® - Click Strip System
The strip system is the most traditional standard modern metal cover technique. With the RHEINZINK click strip system, courses and protective caps are produced ex works up to a length of 6 m, in a single process. For production of longer courses, mobile roll shapers are available on loan. The pre-shaped RHEINZINK click strip cap is also available in the standard length of 3 m. The system is suitable for roof slopes from 3° with no additional sealing-technical measures required. Increased demands make use of structured separators or weather and rain proof under covers essential.
Continuous development
For further optimisation of the RHEINZINK click strip system, three further system components have been developed: the click rail holder, finished in 1.0 mm thick galvanised steel, serves as a replacement for the previously used wooden rail and corresponding bindings and binding strips, as the holder also form the binding profile for the rail cap course and carrier. At the bottom end, the rail cap is flared to allow slight overlap of the individual caps. In conjunction with the factory pre-finished ridge and eave end profiles, assembly of the RHEINZINK click rail holder has been significantly rationalised.
|
|
|
The Sabiana Duck Strip radiant panels are produced in 8 different models, with 2 standard colours, and others upon request. Each model features elements measuring 4 and 6 metres in length (3 and 5 metres upon request). Each element can be easily connected by pressfittings or by welding the pipes (in the latter case the pipes are supplied with belled ends to assist coupling and welding).
|
|
|
STRIP 674/ALSF stool in faggio with back in wood and sfoderabile imbottito seat by Enrico Franzolini
|
|
... see all the products in the category
Bar chairs
|
 see the results for the following category : Screens |
|
|
