|
|
A product made for you!
We offer a too rustic product to you neither, nor too sophisticated, who never fall broken down and who solves your principal concern. Firstly adapts to all shapes of basins (in angle, with side staircase, cut sides, out of bean,...)
General presentation
Firstly is a formed low arch of removable modules. The ends are closed by vertical gables. The modules present a white thermolacquered aluminum structure and a translucent Polycarbonate coating, double wall, thickness 8 mm, anti treaty ultraviolet (completion transparency in option)
The assembly structure-coating is fixed by riveting (better results of the tests of resistance to snow and the wind on the market). The attachment unit on the ground is carried out by means of legs hinges aluminum, knurled buttons screwed in ankles of anchoring stainless.
|
|
BRILLIANCE TPA (Télescopie Partial), the telescopic one adapted to small spaces
Brio TPA is composed of modules having three widths maximum. The first two sections position on curbstone and the third section positions on the terrace.
In the case of a very reduced space around the pool, Brio TPA can present only two sections positioning on curbstone.
The telescopy is then partial (semi-sliding system) since there will remain two modules above water. But you will benefit from a maximum of space of life around the pool.
Brio TPA is the telescopic ideal for the small terraces.
The modules carefully slip all along the pool thanks to the exclusive process IdealSlide. This system patented by Abridéal was rewarded by Trophies INPI for the innovation 2008.
|
|
Brilliance operating burnup, the telescopic one which handles end of the fingers.
The modules carefully slip all along the pool thanks to the exclusive process IdealSlide. This system patented by Abridéal was rewarded by Trophies INPI for the innovation 2008.
Brilliance operating burnup is composed of autonomous modules and different range (Télescopie COmplète).
The progression of a module on the other is of 20 cm in width and 10 cm in height.
The modules can store the ones above the others in end of pool or, in the ideal, just behind, if there exists release sufficient. The pool is then completely discovered.
Brilliance thus requires a broad beach around the basin.
|
|
Mezzo TPA (Télescopie Partial) is a semi-sliding shelter. The modules are twinned and slide 2 by 2. This makes it possible to limit the pasting of the shelter by reducing the number of "steps" necessary. In the case of a shelter having an odd number of modules, the last module is independent.
The modules carefully slip all along the pool thanks to the exclusive process IdealSlide. This system patented by Abridéal was rewarded by Trophies INPI for the innovation 2008.
Mezzo TPA proposes a completion "Transparency" offering a broad vision on the pool.
It can be equipped with a broad sliding hatch in the arch of a module for an access to high-speed water, of a cutting or a window block to pass to the top of a technical block or a diving board, of a powerful system of motorization "IdéalRun".
|
|
|
|
|
|
MEZZO operating burnup (Télescopie Supplements) is a telescopic pool enclosure of traditional and discrete form. Each module is autonomous and of different range. The folding up of the unit functions according to the multi-stage system. The obstruction of the once opened shelter is thus tiny room to the maximum.
MEZZO operating burnup was conceived to cumulate all the advantages sought by the owner of pool: handiness, thermal effectiveness, esthetism. The modules carefully slip all along the pool thanks to the exclusive process IdealSlide. This system patented by Abridéal was rewarded by Trophies INPI for the innovation 2008.
Mezzo operating burnup is available in Tradition version (roofing entirely in polycarobnate double translucent wall) or in Transparence version (of broad transparent panels offer a very pleasant vision on the pool).
It can be equipped with a sliding hatch on any of its modules, with a cutting or a window block to pass to the top of a technical block or a diving board, as well as particularly reliable IdealRun motorization.
|
|
|
|
|
|
An Endless Summer telescopic pool enclosure is the perfect answer to the changeable British climate as it allows an outdoor pool to be converted to an indoor pool in a matter of minutes.
Endless summer enclosures consist of a fixed end bay that is permanently attached to the ground, and a series of smooth running and lightweight moveable bays that slide underneath each other as the enclosure is opened.
The choice is yours
The pool enclosure is made up of a series of modular components which can be integrated to ensure that the enclosure can accommodate almost any shape pool, pool surround materials and adjoining buildings. The flexibility of the design and its adaptability will respond to your most creative and imaginative plans. Besides the standard enclosures, our custom designs include retracting, fixed, lean-to, low level and centre opening models.
Folding concertina doors allow complete full width access into the enclosure in seconds. There is also an option of additional windows and vents or full height, side opening windows allowing the side of the building to be opened without retracting the building.
|
|
|
|
|
|
The elegant protection of swimming pools. This is the reason why we created this type of enclosure. You will not loose the view of your garden and surrounding nature but you will be able to freely use the swimming pool even when the cover is closed.
Size:
Width: 3,0 - 6,25 m
Width: 6,5 - 9,0 m
Lenght: 6,40 - 16,00 m
Height: 0,85 - 1,70 m
Number of segments: 3 - 7
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green
Polycarbonate: twin-wall transparent NO DROP, thickness 10 mm, UV protection on one
Leading lines:
STANDARD - height 28 mm, natural elox or powder painting in beige
PROGRES - height 15 mm, natural elox or beige RAL 1015
leading lines
in the length of an enclosure
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
automatic locking system
of segments, type STANDARD
* enclosures with 4 main profiles per segment as a standard feature
|
|
|
|
|
|
We are introducing new models of low swimming pool enclosures. These models were especially made on base of our customer requests. We have created new line of rounded aluminium profiles have the highest safety and aesthetic standards as well as stability and endurance. Every model from the NEO line has also very comfort automatic locking system.
Size:
Width: 4,0 - 6,25 m
Lenght: 6,40 - 14,90 m
Height: 1,5 - 2,10 m
Number of segments: 3 - 7
STANDARD FEATURES
Color: elox C-0(silver), white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Edges of segments are rounded including caps in the same color as profi les.
Polycarbonate: twin-wall, clear, 10mm , NO DROP, one-sided UV protection, U = 3,1 W/m²K
Leading lines: COMFORT – height 15mm, color – natural elox or beige RAL 1015, height 15mm
Leading lines in the lenght of an enclosure
Faces inner, fi xed made from polycarbonate and aluminium profiles
1 door according to the client´s request
AIR FRESHTM system – lift up brushes on both faces, (lift up brushes can´t be used in a case of door without sill), 2 segments locked
iin the position of open AIR FRESHTM system
Automatic locking system COMFORT including safety locking of an enclosure FORTIS, INNOX or ARX
|
|
|
This new model of top-of-the-range pool enclosure proposed by Abriscine is single. With its form and its colors avant-gardists, it adapts to all types of pools. It is a new concept, combining solidity, esthetics and comfort.
|
|
- Solar panel
- Belts : allow the translation of the modules at the time of opening or closing of the pool cover
- Cam : part whose design allows the various phases (stacking up, rise) of the movements of modules.
- Protection box of the motorized system. It s by using a key thet we activate the motorized system.
|
|
- Polycarbonate taken in rabbet in a male profile and/or a female profile.
- Stainless tightening adjusting knob with a removable and sliding aluminium mounting bracket.
- Set of safety with cylinder of locking with double action of the trap door of access.
- Guide coil of the sliding module.
|
|
Lengthens the number of days your pool may be used
Helps to control access of children and pets
The height of the cover allows use of pool cleaner
Simple, fast and safe installation
Easily transported
Can be assembled and dismantled in less than 30 minutes
Can be stored in a reduced space
|
|
|
|
|
|
This construction is a new type of an enclosure which is not only extremely low but also has a very unique feature! The model offers the same comfort as Oceanic and Riviera but has RAIL ONLY ON ONE SIDE! You can easily slide all segments in both directions.
Size:
Width: 3,0 - 6,0 m
Lenght: 4,20 - 14,90 m
Height: 0,52 - 1,23 m
Number of segments: 2 - 7
STANDARD FEATURES
* Color: elox C-0(silver), white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* clear compact 4 mm with UV protection U = 5,4 W/m²K
Leading lines:
PROGRES – height 15 mm, color – natural elox or beige RAL 1015
Leading lines in the lenght of an enclosure
* The front face of the pool enclosure made from polycarbonate and aluminium profiles
* 1 piece of a lateral door placed in the biggest segment, according to the client´s request
* Sealing brush on the front and back face up to height of 100 mm
* The locking system PROGRES
PREMIUM FEATURES
Wood imitation of aluminium profiles
* Wood imitation
* Lift up part in face, other modifications of front face only in the biggest segment
* Lockable handle or hand rail
* Lift up sealing brush ( lift up sealing component) only on the front face
* Safety lock of the pool enclosure FORTIS, INNOX or ARX
viva-01.jpg
viva-02.jpg
|
|
|
|
|
|
The absolutely transparent view from the enclosure. You can see throught the whole enclosure from the inside or you can choose to have only sides with transparent polycarbonate. It is up to your decision. Polycaronate panels is a unique technology to provide you perfect view from the enclosure. At the same time it provides safety and stability.
Leading lines provide perfect manipulation with the enclosure and sliding is as easy as 1-2-3.
Size:
Width: 4,0 - 8,0 m
Lenght: 4,31 - 17,00 m
Height: 2,8 - 2,84 m
Number of segments: 2 - 8
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* twin-wall transparent NO DROP, thickness 10 mm, UV protection on one side, U = 3,1 W/m²K
Leading lines:
STANDARD - height 28 mm, natural elox or powder painting in beige colour RAL 1015
PROGRES - height 15 mm, natural elox or beige RAL 1015
Leading lines
in the lenght of an enclosure
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
automatic locking system
of segments, type STANDARD
* enclosures with 4 main profiles per segment as a standard feature
|
|
|
|
|
|
The enclosure of the SPA SUNHOUSE®/SPA GRAND SUNHOUSE® is the rounded version of the SPA DOME ORLANDO®. Its larger size provides a bigger utility area. It is fitted with a movable dome shutter and two sliding doors. The model consists of two semi-domes (like the halved SPA DOME ORLANDO® model), two straight enclosure segments with sliding doors on the side and with a cap with ventilated movable enclosure roof ensuring better ventilation. The two wing slide-apart door is mounted to one of the semi-domes. It facilitates the handling of the spa and serves as the main entrance in the enclosured area. The manufacturing version with bronze (smoked color) polycarbonate panels substantially reduces the effects of the sunshine, creates an environment that is pleasant to your eyes, and helps to maintain comfortable indoor temperature. The structural components used in both types of enclosure secure not only simple and effective assembly but also low maintenance.
Size
Width: 5,0 m
Lenght: 8,0 m
Height: 2,3 m
STANDARD FEATURES
Polycarbonate:
* transparent with UV protection, thickness 3 mm
* smoked with UV protection, thickness 3 mm
* embossed with UV protection, thickness 3 mm
Surface of profiles:
* white RAL 9010, beige RAL 1015, silver RAL 9006,
* green RAL 6009, anthracite DB 703
2 types of doors:
* 2 x Single - wing
* 2 x Double – wing
Locking system:
* door locking system from the outside
PREMIUM FEATURES
Wood imitation of aluminium profiles
* Wood imitation
|
|
|
|
|
|
The original structure of the SPA DOME ORLANDO® consists of aluminium profiles which surface is finished with fired colour. Its panels are made of transparent compact polycarbonate (standard version) or relief transparent, bronze polycarbonate (alternative version) which affords a great deal of privacy to the enclosure. SPA DOME ORLANDO® is seated on a circular rail that enables revolving movement throughout a range of a full 360°. The SPA DOME ORLANDO® has an easily assembled base, anchored on a firm foundation material such as concrete or ceramic block paving.
Size:
Width: 4,11 m
Height: 2,3 m
STANDARD FEATURES
Polycarbonate:
* transparent with UV protection, thickness 3 mm
* smoked with UV protection, thickness 3 mm
* embossed with UV protection, thickness 3 mm
Surface of profiles:
* white RAL 9010, beige RAL 1015, silver RAL 9006,
* green RAL 6009, anthracite DB 703
2 types of doors:
* 2 x Single - wing
* 1 x Double - wing
Locking system:
* door locking system from the outside
PREMIUM FEATURES
Wood imitation of aluminium profiles
* Wood imitation
|
|
|
|
|
|
The original structure of the SPA DOME ORLANDO® consists of aluminium profiles which surface is finished with fired colour. Its panels are made of transparent compact polycarbonate (standard version) or relief transparent, bronze polycarbonate (alternative version) which affords a great deal of privacy to the enclosure. SPA DOME ORLANDO® is seated on a circular rail that enables revolving movement throughout a range of a full 360°. The SPA DOME ORLANDO® has an easily assembled base, anchored on a firm foundation material such as concrete or ceramic block paving.
Size:
Width: 5,0 m
Height: 2,3 m
STANDARD FEATURES
Polycarbonate:
* transparent with UV protection, thickness 3 mm
* smoked with UV protection, thickness 3 mm
* embossed with UV protection, thickness 3 mm
Surface of profiles:
* white RAL 9010, beige RAL 1015, silver RAL 9006,
* green RAL 6009, anthracite DB 703
1 or 2 types of doors:
* 2 x Double - wing
* 1 x Single - wing
* 1 x Double - wing
Locking system:
* door locking system from the outside
PREMIUM FEATURES
Wood imitation of aluminium profiles
* Wood imitation
|
|
|
|
|
|
The fascinating structure similar to those seen in “The Thousand and One Nights” or in eastern landscapes. The hemispheric shape guarantees a high degree of insulation for the whole pool and also improves heat retention. The wall elements may be easily moved on ground rails. With this system up to one third of the enclosure can be uncovered, which enables the air temperature to be regulated on hot days and allows the sun to shine directly on the pool. The dome can then rotate 360 degrees. This allows the bathers to choose a view in any direction.
Size:
Width: 4,0 - 10,0 m
Height: 1,9 - 3,5 m
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), white colour RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
fixed - bigger part of the dome, sliding smaller part of the dome
* Double - wing door system - only for inner diameter from 6 to 10 m
Polycarbonate:
* twin - wall transparent NO DROP, thickness 8 mm, UV protection on one side, U = 3,3 W/m²K
PREMIUM FEATURES
Whole enclosure can be produced also from following type of polycarbonate:
* Polycarbonate 4 mm, compact, transparent, with UV protection on both sides, U = 5,4 W/m²K
* Sliding door - it´s purpose is to let you go quickly inside and outside
* Double - wing door system
Wood imitation of aluminium profiles
* Wood imitation
DOOR SYSTEMS
For inner diameter from 4 m to 5,9 m For inner diameter from 6 m to 10 m
|
|
|
|
|
|
The enclosure of the SPA SUNHOUSE®/SPA GRAND SUNHOUSE® is the rounded version of the SPA DOME ORLANDO®. Its larger size provides a bigger utility area. It is fitted with a movable dome shutter and two sliding doors. The model consists of two semi-domes (like the halved SPA DOME ORLANDO® model), two straight enclosure segments with sliding doors on the side and with a cap with ventilated movable enclosure roof ensuring better ventilation. The two wing slide-apart door is mounted to one of the semi-domes. It facilitates the handling of the spa and serves as the main entrance in the enclosured area. The manufacturing version with bronze (smoked color) polycarbonate panels substantially reduces the effects of the sunshine, creates an environment that is pleasant to your eyes, and helps to maintain comfortable indoor temperature. The structural components used in both types of enclosure secure not only simple and effective assembly but also low maintenance.
Size
Width: 4,11 m
Lenght: 6,16 m
Height: 2,3 m
STANDARD FEATURES
Polycarbonate:
* transparent with UV protection, thickness 3 mm
* smoked with UV protection, thickness 3 mm
* embossed with UV protection, thickness 3 mm
Surface of profiles:
* white RAL 9010, beige RAL 1015, silver RAL 9006,
* green RAL 6009, anthracite DB 703
2 types of doors and one type of a window:
* 2 x Single - wing
* 1 x Double – wing
* 1 x Roof window
Locking system:
* door locking system from the outside
PREMIUM FEATURES
Extra double - wing doors
Wood imitation of aluminium profiles
* Wood imitation
|
|
|
|
|
|
Venezia is a similar model to Imperia, only higher. This model is the most robustly constructed of all our swimming pool enclosures.
Size:
Width: 4,0 - 4,75 m
Width: 5,0 - 8,0 m
Lenght: 6,40 - 16,00 m
Height: 2,35 - 3,0 m
Number of segments: 3 - 7
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* twin-wall transparent NO DROP, thickness 10 mm, UV protection on one side, U = 3,1 W/m²K
Leading lines:
STANDARD - height 28 mm, natural elox or powder painting in beige colour RAL 1015
PROGRES - height 15 mm, natural elox or beige RAL 1015
Leading lines
in the length of an enclosure
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
automatic locking system
of segments, type STANDARD
* enclosures with 4 main profiles per segment as a standard feature
PREMIUM FEATURES
The whole enclosure can be produced also from following types of polycarbonates:
* Polycarbonate 10 mm, quad-wall, transparent with UV protection on one side, U = 2,5 W/m²K
* Polycarbonate 10 mm, twin-wall, light blue with UV protection on one side, U = 3,1 W/m²K
* Polycarbonate 10 mm, twin-wall, green, with UV protection on one side, U = 3,1 W/m²K
* Polycarbonate 10 mm, twin-wall, smoked, with UV protection on one side, U = 3,1 W/m²K
* Polycarbonate 4 mm compact, transparent, with UV protection on both sides, U = 5,4 W/m²K
|
|
|
|
|
|
This is our premium enclosure unique in both function and form. This model was fi rst introduced during the Olympic Games in Greece in 2004. Its structure consists of 1 or 2 semi-domes (rounded parts). It’s central (rear) part is made up of standard enclosure segments. The main asset of this model is free movement over the whole roofed area. The sliding system facilitates the easy shifting of the segments in both ways. Each semi-dome contains a vertically movable shutter that opens from the centre outwards. The enclosure can be open and closed by one or two people (depending on the size of the structure). As an alternative, an electric roof shifting system can be used. The aluminum profiles can be manufactured with a wood imitation finish, a feature that is particularly attractive when applied to such a large enclosure.
Size:
Width: 5,0 - 10,0 m
Height: 2,6 - 3,0 m
STANDARD FEATURES
Surface of profiles:
* natural elox C-0 , white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* twin-wall transparent NO DROP, thickness 8 mm, UV protection on one side, U = 3,3 W/m²K
Leading lines:
PROGRES – height 15 mm, color – natural elox or beige RAL 1015
Leading lines
in the length of the respective segments of an enclosure
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
round part
1 piece
by the biggest segment
double movable part of the round part, opening from the middle to edges
movable segments,
length of segments between 2 000 - 2 550 mm
* enclosures with 4 main profiles per segment as a standard feature
|
|
|
|
|
|
Swimming pool enclosure VISION has unique shape which allows walk by the vertical side walls. Thanks to the shape this construction is extremely strong and can take big load.
Size:
Width: 4,0 - 6,0 m
Lenght: 6,40 - 14,90 m
Height: 2,29 - 2,78 m
Number of segments: 3 - 7
STANDARD FEATURES
Color: elox C-0(silver), white RAL 9010 Polycarbonate:
* clear compact 4 mm with UV protection U = 5,4 W/m²K
Leading lines: PROGRES – height 15 mm, color – natural elox or beige RAL 1015
Leading lines in the lenght of an enclosure
* Front face of the pool enclosure inner
* 1 door according to the client´s request
* Sealing brush on the front and back
* The locking system PROGRES
PREMIUM FEATURES
Wood imitation of aluminium profiles
* Wood imitation
* Door in the face, opening or sliding
* Double shifting door
* Lateral door in every segment
* Ventilating door
* Lift up part in face; another face modification
* Lockable handle
* Lift up brushes
* Safety lock of the pool enclosure FORTIS, INNOX or ARX
Heightening of an enclosure
* Heightening up to 100 mm free
* Heightening for every additional 100 mm
|
|
|
|
|
|
We are introducing new models of low swimming pool enclosures. These models were especially made on base of our customer requests. We have created new line of models with rounded aluminium profiles which have the highest safety and aesthetic standards as well as stability and endurance. Every model from the NEO line has also very comfort automatic locking system.
Size:
Width: 4,0 - 6,25 m
Lenght: 6,40 - 14,90 m
Height: 2,20 - 2,70 m
Number of segments: 3 - 7
STANDARD FEATURES
Color: elox C-0(silver), white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Edges of segments are rounded including caps in the same color as profiles.
Polycarbonate: twin-wall, clear, 10mm , NO DROP, one-sided UV protection, U = 3,1 W/m²K
Leading lines: COMFORT – height 15mm, color – natural elox or beige RAL 1015, height 15mm
Leading lines in the lenght of an enclosure
Faces inner, fi xed made from polycarbonate and aluminium profiles
1 door according to the client´s request
AIR FRESH™ system – lift up brushes on both faces, (lift up brushes can´t be used in a case of door without sill), 2 segments locked
in the position of open AIR FRESH™ system
Automatic locking system COMFORT including safety locking of an enclosure FORTIS, INNOX or ARX
|
|
|
|
|
|
This spacious swimming pool enclosure can be used not only as a swimming pool enclosure but also as a room, where you and your family and friends can enjoy relaxation with coffee or tea. You can also exnad this enclosure behind the swimming pool, our sophisticated leading lines will help manipulation.
Size:
Width: 4,0 - 6,25 m
Width: 6,5 - 9,0 m
Lenght: 6,40 - 16,00 m
Height: 2,2 - 3,0 m
Number of segments: 3 - 7
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* twin-wall transparent NO DROP, thickness 10 mm, UV protection on one side, U = 3,1 W/m²K
Leading lines:
STANDARD - height 28 mm, natural elox or powder painting in beige colour RAL 1015
PROGRES - height 15 mm, natural elox or beige RAL 1015
Leading lines
in the lenght of an enclosure
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
automatic locking system
of segments, type STANDARD
* enclosures with 4 main profiles per segment as a standard feature
|
|
|
|
|
|
This type of enclosures which is in the family of low type enclosures will also fit perfectly into your garden. You can still freely swim in the pool even if the pool cover is closed. The shape is little bit different from the ELEGANT pool enclosure.
Size:
Width: 2,5 - 6,25 m
Width: 6,5 - 8 m
Lenght: 4,20 - 16,00 m
Height: 0,6 - 1,8 m
Number of segments: 2 - 7
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate: twin-wall transparent NO DROP, thickness 10 mm, UV protection on one side, U = 3,1 W/m²K Leading lines: STANDARD - height 28 mm, natural elox or powder painting in beige colour RAL 1015 PROGRES - height 15 mm, natural elox or beige RAL 1015
leading lines
in the length of an enclosure The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
automatic locking system
of segments, type STANDARD * enclosures with 4 main profiles per segment as a standard feature
PREMIUM FEATURES
The whole enclosure can be produced also from following types of polycarbonates:
* Polycarbonate 10 mm, quad-wall, transparent with UV protection on one side, U = 2,5 W/m²K
* Polycarbonate 10 mm, twin-wall, light blue with UV protection on one side, U = 3,1 W/m²K
* Polycarbonate 10 mm, twin-wall, green, with UV protection on one side, U = 3,1 W/m²K
* Polycarbonate 10 mm, twin-wall, smoked, with UV protection on one side, U = 3,1 W/m²K
* Polycarbonate 4 mm compact, transparent, with UV protection on both sides, U = 5,4 W/m²K
|
|
|
|
|
|
A combination of simple walls, inclined at about 800, and arched elements. The shape of the construction ensures easy movement around three sides of the swimming pool. A sliding door is fitted in the vertical side wall, and a swinging or sliding door may be placed in the end walls. The Ravena line is an optimal solution from the point of view of the size and functionality of the enclosure. This model is particularly attractive for swimming pools located alongside buildings or existing walls. Due to its modern design and fine appearance it can be recommended in all conditions.
Size:
Width: 4,0 - 5,25 m
Width: 5,5 - 7,5 m
Lenght: 6,40 - 16,00 m
Height: 2,2 - 3,0 m
Number of segments: 3 - 7
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* twin-wall transparent NO DROP, thickness 10 mm, UV protection on one side, U = 3,1 W/m²K
Leading lines:
STANDARD - height 28 mm, natural elox or powder painting in beige colour RAL 1015
PROGRES - height 15 mm, natural elox or beige RAL 1015
Leading lines
in the length of an enclosure
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
automatic locking system
of segments, type STANDARD
* enclosures with 4 main profiles per segment as a standard feature
|
|
Our Telescopic Pool Enclosures Design
As maybe you would expect, our design studio enjoys adding value with typical Italian flair. Of course everything is made to measure based on the dimensions and scale of your site. We can adapt colour, shape and form to suit your setting and match your requirements.
This site shows how a carefully measured height and a well proportioned structure can deliver an impressive result - whether viewed from the inside or outside. In this example the graphite grey finish of the aluminium profile perfectly compliment the traditional stonework.
|
|
|
|
|
|
Are you looking for a very low enclosure? Then CORONA is the right solution for you. This construction is the lowest enclosure yet. Thanks to the vertical walls and cleverly rounded arch you can still swim underneath it.
Size:
Width: 3,0 - 6,0 m
Lenght: 4,20 - 14,90 m
Height: 0,43 - 1,14 m
Number of segments: 2 - 7
STANDARD FEATURES
Color: elox C-0(silver), white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate: clear compact 4 mm with UV protection U = 5,4 W/m²K
Leading lines:
PROGRES – height 15 mm, color – natural elox or beige RAL 1015
Leading lines in the lenght of an enclosure
* The front face of the pool enclosure made from polycarbonate and aluminium profi les
* 1 piece of a lateral door placed in the biggest segment, according to the client´s request
* Sealing brush on the front and back face up to height of 100 mm
* The locking system PROGRES
PREMIUM FEATURES
Wood imitation of aluminium profiles:
* Wood imitation
* Lift up part in face, other modifi cations of front face only in the biggest segment
* Lockable handle or hand rail
* Lift up sealing brush ( lift up sealing component) only on the front face
* Safety lock of the pool enclosure FORTIS, INNOX or ARX
|
|
|
|
|
|
This type of swimming pool enclosure is similat to the OCEANIC type. The only difference is that this type of swimming pool enclosure does not need leading lines to slide, which would be appretiated if you have nointerest in your basement modification.
Size:
Width: 3,5 - 6,0 m
Lenght: 4,31 - 12,81 m
Height: 0,7 - 1,2 m
Number of segments: 2 - 6
STANDARD FEATURES
Surface of profiles:
* natural elox C-O (silver), colors: white RAL 9010, beige RAL 1015, green RAL 6009, anthracite DB 703
Polycarbonate:
* polycarbonate 4 mm compact transparent; in lateral sides and faces
* twin-wall transparent NO DROP, thickness 8 mm, UV protection on one side, U = 3,3 W/m²K, in roof
The front and back face made from aluminium profiles and polycarbonate
1 door
according to the client´s request
sealing brushes on faces up to
height 150 mm
the locking system Riviera
PREMIUM FEATURES
* The whole enclosure can be produced also from polycarbonate 4 mm, compact, transparent with UV protection on both sides, U = 5,4 W/m²K
PREMIUM FEATURES
* Extra door in face, sliding or opening (can´t be used door without sill)
* Double shifting, opening door (can´t be used door without sill)
* Lateral door
* Ventilating door
* Lift up part in face; another face modifications
* Lockable handle
* Lift up brushes
Heightening of an enclosure
* Heightening up to 100 mm
* Heightening for every additional 100 mm
Wood imitation of aluminium profiles
* Wood imitation
|
|
|
|
