|
|
Low shelter of type "Garage door": Interdependent with the element
Easy to handle by only one person
* Triangular guidance
* Telescopic shelter without rail
* Easy to handle by only one person
* Dimensions in height: [0,60m - maximum 0,90m]
* Dimensions in length: [5,80m - 12,60m]
|
|
THE MIXED SHELTER :
The mixed shelter is an open-air lounge available all year round.
Its aesthetic appearance and the view it provides looking outwards are its main advantages.
The mixed shelter is a mobile lounge. You retain a corner for changing into your swimming costume and you can swim comfortably under the raised lower part.
The mixed shelter adopts the same techniques as the high shelter, combining discreetness, cost-effectiveness and comfort. Available with or without rails (SWIM ECO).
The Group Sectors and subsidiaries Innovation Low shelters range Mixed shelters range High shelters range Mid-height shelters range Back-to-back shelters range Guarantee Building permits Technical inspection Maintenance contracts Downloadable documents The new standards Downloadable documents Trade fairs Contact
sheet Access and contact details
|
|
The Shelter High Mural or Leant Abrisud:
To pass directly from the house to the pool without putting the foot in
garden: an appreciable comfort, especially for the sensitive to the cold ones!
More roomy than a loggia, more preserved than a simple terrace, the shelter high mural or leant becomes the natural extension of your dwelling: a part filled with light from which you will profit in any season to bathe you but also to lunch outside when time does not allow yet.
A micro climate around your pool and a true value added for your house! Abrisud exclusiveness: 5 patents which make the difference! The technical guarantees that we associate with the manufacture of our products are the pledge of its reliability. All our shelters are in conformity with standard NF-P90-309
|
|
This telescopic shelter without rail on the ground is carried out to measure and makes it possible to adapt to smallest spaces.
Only one person is enough to handle it. It is equipped with a sliding frontage with a door in the center and with a fixed bottom with a protected sliding door.
Many options are adaptable to this model, motorization, doors side, Climabris.
This shelter is in conformity with standard NFP 90-309.
|
|
THE BACK-TO-BACK SHELTER :
With the back-to-back model, the pool becomes an integral part of the house.
It is more than just a shelter; sometimes (depending on the options) it is a real telescopic veranda.
The back-to-back model enables you to experience the outdoors from indoors.
It is a real living room which can be integrated into any support and any house.
Being much cheaper than a veranda per square metre, it is preferred to a veranda due to its telescopic nature, which enables you to avoid heat stroke during summer heat waves.
The advantages and options : are its solar-powered motor - 4/6/4 double glazing - 33.2 laminated glass - 8 mm mirror glass - 16 mm polycarbonate roof - it can be fitted with any type of sliding door - has full waterproofing including gutters - over 1,000 colours to choose from - and large-width models can be provided based on a special quotation - only with a central opening.
The Group Sectors and subsidiaries Innovation Low shelters range Mixed shelters range High shelters range Mid-height shelters range Back-to-back shelters range Guarantee Building permits Technical inspection Maintenance contracts Downloadable documents The new standards Downloadable documents Trade fairs Contact
sheet Access and contact details
|
|
Lengthens the number of days your pool may be used
Helps to control access of children and pets
The height of the cover allows use of pool cleaner
Simple, fast and safe installation
Easily transported
Can be assembled and dismantled in less than 30 minutes
Can be stored in a reduced space
|
|
Lengthens the number of days your pool may be used
Helps to control access of children and pets
The height of the cover allows use of pool cleaner
Simple, fast and safe installation
Easily transported
Can be assembled and dismantled in less than 30 minutes
Can be stored in a reduced space
|
|
Lengthens the number of days your pool may be used
Helps to control access of children and pets
The height of the cover allows use of pool cleaner
Simple, fast and safe installation
Easily transported
Can be assembled and dismantled in less than 30 minutes
Can be stored in a reduced space
|
|
Lengthens the number of days your pool may be used
Helps to control access of children and pets
The height of the cover allows use of pool cleaner
Simple, fast and safe installation
Easily transported
Can be assembled and dismantled in less than 30 minutes
Can be stored in a reduced space
|
|
Lengthens the number of days your pool may be used
Helps to control access of children and pets
The height of the cover allows use of pool cleaner
Simple, fast and safe installation
Easily transported
Can be assembled and dismantled in less than 30 minutes
Can be stored in a reduced space
|
|
- Fixed enclosure.
- Double, retractable windows with option o( partial or total opening.
- Fixed base with sliding doors.
- Possibility of colour coordination in the structure and embellishments
- Transparent or coloured methacrylate walls and translucent polycarbonate roof.
|
|
The design is similar to the system "Borkum", but only with strengthened profiles and steep side walls with a roof inclination of approx. 5°.
Basis price - equipment:
Construction of aluminum:
silver/anodized E6/EV1.
Glazing of the roof:
ISO-cellular sheets transparent or white, long life "no drop".
Lateral sliding parts:
Plexiglass clear and KST* included with safety lock, front / back wall firmly glazed with glass of 5 mm.
Kit with 1 sliding door, in- and outside lockable and circle/catch lock included.
|
|
- Rail free telescopic enclosure.
- Central or total opening.
- Removable or fixed tillable (ront and fixed end. both wi*i sliding doors
- Possibility of colour coordination in the structure and embellishments
- Transparent or coloured methacrylate walls and translucent polycarbonate roof.
|
|
- Telescopic enclosure.
- Wall-fixed rails, rail free on ground.
- Central or total opening.
- Fixed or removable fronts and ends, with sliding doors.
- Option of side doors and arches in all modules.
|
|
- Rail free telescopic enclosure.
- Central or total opening.
- Fixed or removable base and tillable fronts, with sliding doors.
- Option of side doors and arches on all modules.
- Possibility of colour coordination in the structure and embellishments
|
|
- Kikstand of lifting with sliding aluminium hinge
- Polycarbonate taken in rabbet in a male profile and/or female profile.
- Set of safety with cylinder of locking with double action of the trap door of access.
|
|
A product made for you
We offer a too rustic product to you neither, nor too sophisticated, who never fall broken down and who solves your principal concern.
General presentation
Abridéal is a formed low arch of removable modules. The ends are closed by vertical gables. The modules present a white thermolacquered aluminum structure and coating a translucent GE Polycarbonate,
double wall, thickness 8 mm, anti treaty ultraviolet.
The assembly structure-coating is fixed by riveting. The attachment unit on the ground is carried out by means of legs hinges aluminum, knurled buttons screwed in ankles of anchoring stainless.
|
|
The “CRISTAL® Enclosure” - A special transparent glazing material highlights your pool!
It is a new generation polycarbonate, the same material used to make glasses, CDs and DVDs.
This substance is extremely light and unusually resistant. The tested and proven technical characteristics of this high-quality synthetic glazing material ensure heightened security and stunning transparency. The swimming pool enclosure becomes so unnoticeable that one virtually forgets that it is even there!
This all-new “CRISTAL®” enclosure feature is available as an option (against an upcharge) for our existing models: CLASSIC, SEMI-RETRACTABLE and MOTORIZED. The same guarantees in terms of security apply.
|
|
- Rail free telescopic enclosure.
- Central or total opening.
- Removable or fixed tillable front and removable or fixed end.
- Possibility of colour coordination in the structure and embellishments
|
|
- Rail free telescopic enclosure.
- Central or total opening.
- Fixed or removable base and tiltable front, with sliding windows
- Option of arches on all modules.
- Possibility of colour coordination in the structure and embellishments.
|
|
Néo, the telescopic one adapted to small spaces
Néo is composed of modules having three widths maximum. The first two sections position on curbstone and the third section positions on the terrace.
In the case of a very reduced space around the pool, Néo can present only two sections positioning on curbstone.
The telescopy is then partial since there will remain two modules above water. But you will benefit from a maximum of space of life around the pool.
Néo is the telescopic ideal for the small terraces.
|
|
Brilliance, the telescopic one which handles end of the fingers
Brilliance is composed of autonomous modules and different range.
The progression of a module on the other is of 20 cm in width and 10 cm in height.
The modules can store the ones above the others in end of pool or, in the ideal, just behind, if there exists release sufficient. The pool is then completely discovered.
Brilliance thus requires a broad beach around the basin.
|
|
- Solar panel
- Belts : allow the translation of the modules at the time of opening or closing of the pool cover
- Cam : part whose design allows the various phases (stacking up, rise) of the movements of modules.
- Protection box of the motorized system. It s by using a key thet we activate the motorized system.
|
|
- Polycarbonate taken in rabbet in a male profile and/or a female profile.
- Stainless tightening adjusting knob with a removable and sliding aluminium mounting bracket.
- Set of safety with cylinder of locking with double action of the trap door of access.
- Guide coil of the sliding module.
|
|
MEZZO is an pool enclosure general-purpose, available in version integral telescopy or semi-sliding version.
Profiting from the exclusive process IdéalSlide, it slips all along the pool carefully.
In semi-sliding version, it can be carried out into 2 or 3 different sections. In 3 sections, it offers the advantage of releasing the pool more that other semi-sliding shelters: for example, for a basin of 10 X 5, it makes it possible to release 6.30 instead of 4.20M
It is particularly adapted to the reduced terraces because the influence on the ground as of its modules is limited.
|
|
|
This telescopic shelter without rail on the ground is carried out to measure and makes it possible to adapt to the pluspetis spaces. Only one person is enough to handle it. It is equipped with a sliding frontage with a door in the center and of a fixed bottom with a protected sliding door.
|
|
|
Modern and ergonomic, these low buildings follow Eureka's traditional design formula. As a compromise between the full stand alone residential telescopic buildings and the low entry level low covers, they are usually from 40 cm up to 1.20m in height on the smallest bay, thus allowing full use of the pool, even sitting on the edge in the higher buildings. The higher models allow standing head room under the bigger bays.
|
|
"I want a shelter which protects my basin... but especially not to see it. Not question of hiding me sight."
With the eyes of most of the consumers, esthetics is the priority axis of improvement of the low shelters. On the basis of this report, and faithful to its practices, Abrisud invested in the R & D for a better integration of the product with the environment of the pool. The Flat Shelter Abrisud marks a real evolution within the existing offer on
the market of the pool enclosure, and more largely, of the systems of safety for the pools (covers, covers, shutters, etc).
With this new concept, the pool gains in comfort of use (security, cleanliness and heat of water) as would do it a shelter low curved or telescopic, all preserving the landscape accesses of the pool. The sight of the garden is preserved and the shelter is completely made forget! This new type of shelter offers the advantages of the low shelter in any discretion.
This shelter is characterized by its modern design as in the choice from materials (new lacquering bronzes sanded aluminum profiles and impression on polycarbonate).
The Flat Shelter Abrisud is equipped with a system of motorization to the particularly elegant lines, which point out the pontoon out of wooden proposed in option. This automation returns its use of easiest; its flat modules of the same width roll and are superimposed on the extremity of the basin.
To answer the desires of personalization of the owners of pool, a coating
printed is from now on available. The coating is made graphic to give to the garden an environment "déco".
|
|
The High Shelter of Pool independent Abrisud
Combining the esthetism of a veranda and the comfort of an pool enclosure, the shelter high independent constitutes a true additional part, a haven of peace in the middle of your garden. Space with living with whole share, you will appreciate his interior volume to remain at the edge of the basin apart from the bathe: to see or paresser in a deckchair, to play with the children, to discuss in family or between friends, as many occasions to make your pool a space of pleasures and relaxation unceasingly renewed!
A micro climate around your pool and a true value added for your house! Abrisud exclusiveness: 5 patents which make the difference! The technical guarantees that we associate with the manufacture of our products are the pledge of its reliability.
|
|
Pool Enclosures The Choice
Each site will have individual needs and that is why we offer so many different options.
Size - We have presented a small scale enclosure on the previous page.
Here we demonstrate our experience and expertise in larger solutions, showing a centre-opening option for a client with a large public swimming pool. Typically our enclosures span from 4 m x 10 m up to 17.5 m x 35 m for the larger self supporting structures. Even larger structures are possible but these will require a special solution.
Style - 'Estensia' enclosures can either be free-standing and symmetrical as illustrated by the main picture opposite and shown by the drawing 'complete section' or a 'partial section' as pictured below, with 'Estensia' adjoining a wall. In such cases our design team will ensure that we take account of all needs relating to drainage and fixing.
Open / close - A standard enclosure will have the opening from one end only. Below right, we show an alternative option for a centre opening; particularly useful here, when the client has chosen part of the enclosure to be a 'complete section' and part to be a 'adjoining section' against a wall.
|
|
|
|
