|
|
EQUILIS® sliding gate
The manual gate EQUILIS® adapt to all the ways of installation thanks to the two versions proposed : to seal or to screw.
|
|
The gate automated Porteo Monceau is a beating gate made up of two casements and two intelligent columns. The connection of the casements is carried out by actuator FAAC 750 bellow, and by a bearing with simple line of balls in top. The unit is made out of sheet and steel galvanized and painted by thermo lacquering out of powder for the structure, and the casements are sanded metallized and painted by thermo lacquering out of powder.
The intelligent columns shelter the various elements necessary for the automation of the gate and the respect of the safety requirements:
- A standard management board FAAC 462
- A set of integrated cells ordered in closing
- A twinkling lamp
- A lamp of lighting of zone
- A jack of the type FAAC 750
- A "gatecoder" with the adaptation kit for engine 750
The access to the various elements of automation is done by the door located on the interior frontage of each intelligent column. This steel door is assembled on hinges and is locked using a ¼ of key turn.
Automation is equipped with a anti-crashing security located on the section of the first casement, of a turntable power station to be sealed containing and the blocking stopping device of the gate actuated at the time of its movement by engine FAAC 750, as well as ordering of manual releasing in the event of interruption of current or breakdown of the system, exclusively accessible to the only authorized people.
The retractable system of thrust allows, once the opened gate, not to present an asperity more being able to obstruct the passage of the vehicles. |
|
The gate automated Porteo Similaire is a beating gate made up of two casements and an electronic enclosure. The connection of the casements is carried out by a conical roller bearing low, and by a bearing with simple line of balls in top. The unit is made out of sheet and steel galvanized and painted by thermo lacquering out of powder for the structure, and the casements are sanded metallized and painted by thermo lacquering out of powder.
The enclosure shelters the various elements necessary for the automation of the gate and the respect of the safety requirements: a standard management board FAAC 462 manager two sets of cells, a twinkling lamp, a lamp of lighting of zone. Each ventail is actuated by a jack FAAC 400 associated with its "gatecoder".
Automation is equipped with a anti-crashing security located on the beaten section of the ventail including/understanding, of a turntable to be sealed containing and the blocking stopping device of the gate (electromechanical lock). |
|
| ... products without information |
| |
... see all the products in the category
Gates
|
The privilege of beauty.
Solid and durable, for heavy use.
Elegant and refined, Luxo was born to be admired and desired.
Its modern and futurist structure is characterized by a soft combination of round and smooth forms, it is suitable for any type of gate frame.
It has been designed to comply with the most solid and reliable DITEC mechanisms.
Aluminium, the noble material it is made of, makes it look light and clean; this feature will last in time despite bad climatic conditions, also thanks to its additional polyester coating.
Every detail has been studied and designed with passion and care. |
|
The privilege of beauty.
Solid and durable, for heavy use.
Elegant and refined, Luxo was born to be admired and desired.
Its modern and futurist structure is characterized by a soft combination of round and smooth forms, it is suitable for any type of gate frame.
It has been designed to comply with the most solid and reliable DITEC mechanisms.
Aluminium, the noble material it is made of, makes it look light and clean; this feature will last in time despite bad climatic conditions, also thanks to its additional polyester coating.
Every detail has been studied and designed with passion and care.
Automations for gates - LUXO
Swing gates require adequate attention as regards motorisation as they have to often undergo heavy-duty use and are exposed to the weather.
DITEC presents a complete range of products designed for easy installation on gates of all sizes and for heavy-duty use.
Technical features
The privilege of beauty. Sturdy and tireless, for heavy-duty use. Elegant and refined, Luxo has been designed to be admired and desired.
It features a modern, futuristic structure with a soft and fluid shape that well adapts to any type of frame.
It has been designed and sized for the sturdiest and most reliable DITEC mechanisms.
The aluminium from which it is made, gives it a lightweight and clean look that remains over the years even in unfavourable weather conditions thanks to the extra coat of polyester paint.
Each shape and every detail have been studied and designed carefully and passionately.
No problem in case of a power break. The elegant door, easy to reach and open, houses the manual release mechanism for brilliantly overcoming power |
|
Electromechanical gear motor for swing gates with leaves up to 2m and those versions with large pillars and lightweight structures, ideal for one leaf pedestrian gates.
|
|
Special features of the twist operator are:
Adjustable fittings; optionally screw-on or weldable
High-quality materials, e.g. stainless steel and aluminium
Stainless steel ice-stripping ring
No stop unit necessary for OPEN gate
Automatic force memory
Regulated "Soft Run"
Very quiet
Easy to install
Universal application for gates opening to the right or left
Electromechanical
Max. wing width 2,500 mm
Max. weight per gate wing 200 kg |
|
Two versions for leaves of up to 3 m and 5 m.
Sturdy, compact and reliable - this describes the swing-gate operator which is the best expression of the reliable Came technology. Products which can meet even the most complex needs and hold up to the most extreme use, such as in collective areas. |
|
Electromechanical operator for swing gates, leaf length up to 2 m, leaf weight up to 200 kg, residential use. ONLY AVAILABLE AS A KIT
Model VIRGO ~ Articulated Arm
24v Swing Gate Operator.
A new model from BFT designed specifically for ease of installation to domestic gates of up to 1800mm per leaf (200kg).
This compact design with small dimensions will fit unobtrusively to both large and small gates posts. The %u2018On board%u2019 control panel has an LCD display for programming, including anti crush sensitivity and adjustable slow down.
The VIRGO operator is self locking in the open and closed position.This is an adaptable system for light to medium domestic gates offering excellent value for it%u2019s features and reliability.
Easy to fit because: The articulated arm allows the operator to fit directly to the rear of most gate posts. The small dimensions of the operator and drive arm are easy to accommodate in a majority of applications. |
|
| Hydraulic operator for swing gates, leaf length up to 3,5 m, weight up to 800 kg, residential and apartment-block use |
|
Now, you no longer have to get out of your car to open your gates. They will open automatically in just a few seconds to allow you to enter or leave your property quickly, without causing a safety hazard in the road. In addition, Somfy gate openers guarantee the secure and reliable protection of your property and provide additional security features that safeguard against potential intruders. A reliable solution that you can count on!
The Axovia range of gate openers provides a motorisation solution for every kind of swing and sliding gate. Your installer will be able to advise you which product is the most suitable for your gate, as it depends on weight and weather conditions. Use the dealer locator to find your nearest installer. |
|
| ... products without information |
| |
|
|
