|
|
Metiles can be easily installed with the traditional gluing technique. The beauty of the metallic finishes gives the possibility to combine Metiles also with the other traditional tiles, such as gres, wood and other metals in order to create rich and personalized floors and covering. The catalogue offers an accurate selection of finishes and the particular iron finished called %u201CCalamina%u201D. All the finishes are available in 7 modules in different sizes for a wide range of combinations.
600 x 600 mm
600 x 300 mm
600 x 200 mm
400 x 400 mm
400 x 200 mm
400 x 100 mm
300 x 300 mm
100 x 100 mm
|
|
|
Corten steel( 60% steel and 40% iron) is a material that changes colour with time, until it reaches a rusty tone. It has been widely used in sculptures since the 1960s for its aesthetic characteristics, environmental stability, and the fact that it is highly malleable.
|
|
Liberty is the new collection from Trend interpreting a selection of colours and sizes of glass, where the deepness of the material becomes the most fascinating decorative element.
The transparent hand cut tesserae, with their luminous vivacity, make indoor and outdoor areas precious and charming.
Available in Trend Up showrooms.
|
|
|
|
|
|
CriSamar® STEP
Anti-Slip Glass
The new CriSamar ® STEP line reproduces industrial designs on acid etched glass, thanks to the deepness of its engraved surface it creates a perfect slip resistant surface.
The STEP Line of CriSamar® is composed by 6 designs, Incus, Aluminum, Nexus, Versus, Codex and Omicron, in two different versions, satin etched and transparent, to adapt to new modern trends.
Sevasa is not only extending their product line by introducing satin etched anti slip glass for flooring but is offering a wide range of new designs, transparencies and sizes.
CHARACTERISTICS
- Colors: extraclear, white, bronze, grey and green.
- Thickness: 3, 4, 5, 6, 8, 10 and 12mm
- Laminated: 6.6.6.1.1, 8.8.8.1.1 and 10.10.10.1.1 mm
- Size: Standard 225 x 321 cm.
(Consult other sizes and compositions).
ATTRIBUTES AND QUALITY
- Base: float glass norm UNE-EN 572-2
- Highly resistant to stains.
- Easy to clean.
- Can be cut, beveled, curved, drilled, tempered and laminated.
- Awarded the ISO 9001 (Quality control) and ISO 14001 (Environmental safety) Standard Certificates.
-Anti-slip certificates.
TO KNOW ABOUT OTHER NON-SLIP FLOORING GLASS, please see ANTISCRATCH glasses
|
|
Dalles de verre de Saint-Just: can be used for decorative / stained glass applications. Can be cutted with watter jet, sanblasting is possible.
Due to the thickness, intensity of the colors is strong
|
|
|
The “Linea Vetro” offers and interesting novelty: coloured extra light “float” crystal tiles matching the sizes and colours of the Vogue system. The main features of this glass tiles product line are its innovative use and its mat/silken V3 finishing, also available with glossy surface VL. A product line to be used for big claddings together with our ceramic and not as simple decorative element.
|
|
Bulk inquiries Only from Architects, Developers and Contractors
LEDIA LF OD / UW - illuminating tile exterior and under water use
V4A stainless steel housing.
Single-pane, tempered safety glass enclosure with anti-slip coat.
Stainless steel installation frame for installation depth of 120 mm.
Available in 4 sizes to match different paving grid patterns.
Comes in 1,5 t or 5 t rollover capacity.
Maintenance free operation.
Choice of EL (effects lighting) or RGB (colour changing) LED configuration.
LEDIA LF OD Ingress protection IP 67 Protection rating III
LEDIA LF UW Ingress protection IP 68 Protection rating III
....................................................................................................................
LEDIA LF ID - illuminating tile interior use
Galvanised steel luminaire housing.
Millimetre exact height adjustment of mounting frame: 60-140 mm
Ingress protection IP 67 Protection rating III
|
|
Rouvière proposes a range of small squares of format 10x10 cm in a large palette.
The squares can be coloured with the request according to RAL.
|
|
Paving Sermipierre de Rouvière takes again the asperities and irregularities of the natural stones and is used as well in interior as in outside.
Sermipierre paving in interior can be posed with the adhesive, on traditional cap, floor heating or in sealed installation. On a heating floor, some 2 cm thickness flagstones are recommended.
|
|
Really more than just a floor!
Every MiraColour tile is a small work of art in its own right, hand-made according to a tradition that is hundreds of years old. But the whole beauty first unfolds when several tiles join together to form exclusive flooring – your flooring. You have a great choice of first class MiraColour tiles, which enables you to design your very own individual living culture. You receive the highest quality and exactly the type of flooring you desire.
You have a vision of your very own tiles design? We realise it. We manufacture MiraColour tiles exclusively for you, according to your personal design – using the very best material and applying traditional handwork. You directly benefit in several ways: you receive the genuine MiraColour in your own absolutely individual design. If you regard this as a fascinating opportunity, contact us and we will be only too glad to advise you.
Your Miracolour Team
|
|
Really more than just a floor!
Every MiraColour tile is a small work of art in its own right, hand-made according to a tradition that is hundreds of years old. But the whole beauty first unfolds when several tiles join together to form exclusive flooring – your flooring. You have a great choice of first class MiraColour tiles, which enables you to design your very own individual living culture. You receive the highest quality and exactly the type of flooring you desire.
Your Miracolour Team
|
|
Really more than just a floor!
Every MiraColour tile is a small work of art in its own right, hand-made according to a tradition that is hundreds of years old. But the whole beauty first unfolds when several tiles join together to form exclusive flooring – your flooring. You have a great choice of first class MiraColour tiles, which enables you to design your very own individual living culture. You receive the highest quality and exactly the type of flooring you desire.
You have a vision of your very own tiles design? We realise it. We manufacture MiraColour tiles exclusively for you, according to your personal design – using the very best material and applying traditional handwork. You directly benefit in several ways: you receive the genuine MiraColour in your own absolutely individual design. If you regard this as a fascinating opportunity, contact us and we will be only too glad to advise you.
Your Miracolour Team
|
|
Really more than just a floor!
Every MiraColour tile is a small work of art in its own right, hand-made according to a tradition that is hundreds of years old. But the whole beauty first unfolds when several tiles join together to form exclusive flooring – your flooring. You have a great choice of first class MiraColour tiles, which enables you to design your very own individual living culture. You receive the highest quality and exactly the type of flooring you desire.
You have a vision of your very own tiles design? We realise it. We manufacture MiraColour tiles exclusively for you, according to your personal design – using the very best material and applying traditional handwork. You directly benefit in several ways: you receive the genuine MiraColour in your own absolutely individual design. If you regard this as a fascinating opportunity, contact us and we will be only too glad to advise you.
Your Miracolour Team
|
|
|
Cement tiles are made of several layers of fine mortar comprising Portland cement, that is to say, a mixture of sand, marble powder, cement, and in the decorative layer, of coloured metal oxides. After a chemical hydration reaction, the cement becomes very solid and hard, almost as hard as the initial rocks from which the constituents were extracted. These are the particulars that go into the making of cement tiles. The mould used is made up of a sheet of steel polished flat, onto which is mounted a frame of heavy steel that opens and shuts thanks to a tightening device. The entire apparatus weighs nearly 15 kilos. The bottom plate is first greased. Then onto it is poured, with a spoon or funnel, a mortar of fine consistency a few centimeters thick.
|
|
|
Cement tiles are made of several layers of fine mortar comprising Portland cement, that is to say, a mixture of sand, marble powder, cement, and in the decorative layer, of coloured metal oxides. After a chemical hydration reaction, the cement becomes very solid and hard, almost as hard as the initial rocks from which the constituents were extracted. These are the particulars that go into the making of cement tiles. The mould used is made up of a sheet of steel polished flat, onto which is mounted a frame of heavy steel that opens and shuts thanks to a tightening device. The entire apparatus weighs nearly 15 kilos. The bottom plate is first greased. Then onto it is poured, with a spoon or funnel, a mortar of fine consistency a few centimeters thick.
|
|
The pigments green, blue and purple are sensitive to the ultraviolet ones.
TECHNICAL INFORMATION :
the reasons, plank and angles in 10 X 10, 10 X 20 and 20 X 20 17 X 17 are done on order cabochons are done all colors. The plinths are done all colors. Weight: 33 kg/m² approximately in thickness of 16 Misters Poids: 23 kg/m² surroundings in 10 mm thickness.
Other models presented can- to be realized in d'autres harmonies made up starting from our pallet of 18 colors, this under certain conditions.
|
|
The pigments green, blue and purple are sensitive to the ultraviolet ones.
TECHNICAL INFORMATION :
the reasons, plank and angles in 10 X 10, 10 X 20 and 20 X 20 17 X 17 are done on order cabochons are done all colors. The plinths are done all colors. Weight: 33 kg/m² approximately in thickness of 16 Misters Poids: 23 kg/m² surroundings in 10 mm thickness.
Other models presented can- to be realized in d'autres harmonies made up starting from our pallet of 18 colors, this under certain conditions.
|
|
The pigments green, blue and purple are sensitive to the ultraviolet ones.
TECHNICAL INFORMATION :
the reasons, plank and angles in 10 X 10, 10 X 20 and 20 X 20 17 X 17 are done on order cabochons are done all colors. The plinths are done all colors. Weight: 33 kg/m² approximately in thickness of 16 Misters Poids: 23 kg/m² surroundings in 10 mm thickness.
Other models presented can- to be realized in d'autres harmonies made up starting from our pallet of 18 colors, this under certain conditions.
|
|
The pigments green, blue and purple are sensitive to the ultraviolet ones.
TECHNICAL INFORMATION :
the reasons, plank and angles in 10 X 10, 10 X 20 and 20 X 20 17 X 17 are done on order cabochons are done all colors. The plinths are done all colors. Weight: 33 kg/m² approximately in thickness of 16 Misters Poids: 23 kg/m² surroundings in 10 mm thickness.
Other models presented can- to be realized in d'autres harmonies made up starting from our pallet of 18 colors, this under certain conditions.
|
|
The pigments green, blue and purple are sensitive to the ultraviolet ones.
TECHNICAL INFORMATION :
the reasons, plank and angles in 10 X 10, 10 X 20 and 20 X 20 17 X 17 are done on order cabochons are done all colors. The plinths are done all colors. Weight: 33 kg/m² approximately in thickness of 16 Misters Poids: 23 kg/m² surroundings in 10 mm thickness.
Other models presented can- to be realized in d'autres harmonies made up starting from our pallet of 18 colors, this under certain conditions.
|
|
The pigments green, blue and purple are sensitive to the ultraviolet ones.
TECHNICAL INFORMATION :
the reasons, plank and angles in 10 X 10, 10 X 20 and 20 X 20 17 X 17 are done on order cabochons are done all colors. The plinths are done all colors. Weight: 33 kg/m² approximately in thickness of 16 Misters Poids: 23 kg/m² surroundings in 10 mm thickness.
Other models presented can- to be realized in d'autres harmonies made up starting from our pallet of 18 colors, this under certain conditions.
|
|
Pave of outside and interior out of reconstituted stone
Materials very resistant and easy of maintenance
Technical specifications:
together of 3 elements
3 X (60x30)
+ 3 X (40x30)
+ 3 X (20x30)
for 1,08 m2
Pose with joint from 1 to 1,5 cm in opus
Weight: 170 kg/m ²
M ²/pallet: 8.64
|
|
Fabbrica del Vignola takes its inspiration from this unique city and the stone that characterises it to create Pietra di Matera, a material that combines the elegance and exclusive nature of the floors of these renovated homes with a simple, practical style.
Pietra di Matera, with its complete fusion and highly compact mix, guarantees the best qualities in terms of mechanical reliability (impact, bending and surface abrasion strength) for both domestic and commercial use.
|
|
Fabbrica del Vignola takes its inspiration from this unique city and the stone that characterises it to create Pietra di Matera, a material that combines the elegance and exclusive nature of the floors of these renovated homes with a simple, practical style.
Pietra di Matera, with its complete fusion and highly compact mix, guarantees the best qualities in terms of mechanical reliability (impact, bending and surface abrasion strength) for both domestic and commercial use.
|
|
|
Graceful as an aria, Artistic Tile's Opera Glass collection offers colors that rouse the emotions and shapes that stir the imagination. Finished in a choice of shimmering gloss or a subtle satin, Opera Glass imparts rooms with a beauty so inspiring, it is no wonder the design world is singing its praises.
|
|
The real value of the materials is made of the simple and raw elements
inside it.
Combinations of minerals creating cement, sand and ground.
This our daily background: let’s give the right value these materials
deserve.
They are the plainest but the most faithful.
Cement, sand and ground are the fabrics of the ateliers we live in.
Why should we cover them? Why shouldn’t we emphasize them?
Here they are : an extremely elegant and soft interpretation of the inner parts of our structures, our homes history.
|
|
|
|
