- Flooring & Wallcovering >
- Tile, Mosaic >
- Transition profile
Transition profiles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Length: 900, 2,700 mm
... element with overlap fot the thresholds in the transition between different materials. Available in sizes 30 x 30 or 900 x 2700 mm. Single shrink packaged inside a PVC tube. The barcode is shown both on the profile ...
HYGENIC CORNER PROFILE MAGNUM DESCRIPTION Horizontal/vertical joint, used to connect floors and coverings. MATERIAL Made of white PVC thermoplastic resin (polyvinyl chloride). USE Used for joining hygienical ...
Transition profile made of aluminum and designed to avoid discontinuities in the pavement. The profile has a wide and smoothed visible side with small grooved that favor the slide resistance. Delivered ...
EMAC
Thickness: 5, 7 mm
Length: 3 m
Novonivel® MINI is a transition profile made of aluminium, designed to bridge discontinuities in low-thickness flooring such as ceramic, vinyl or carpet. The profile has a discreet visible ...
EMAC
Transition profile to avoid the difference of level created when laying floorings at a different height as when a new flooring is layed onto an old one. It is specially designed to be placed after having ...
EMAC
Length: 3 m
... co extruded profile with a flexible face allowing vinyl as this as 2mm to be used. The EVU is exactly the same as the EFU except the profile is unpunched and therefore designed to sit on top of the tile. The ...
LITOKOL
Length: 3 m
This aluminium retro fit transition profile is incredibly easy to install without mechanical fixings, thanks to its self adhesive strip. The varying depths provide an easy solution of choice when bridging ...
LITOKOL
Thickness: 3 mm
Length: 3 m
This aluminium retro fit transition profile is incredibly easy to install without mechanical fixings, thanks to its self adhesive strip. The varying depths provide an easy solution of choice when bridging ...
LITOKOL
A selection of full brass extruded profile shapes for existing floor edges and/or junctions with a 10 mm drop level to connect to flooring materials or fit onto pre-laid floors. It is highly suitable for rapidly connecting ...
PROFILITEC
LEVELTEC RP is conceived as terminal and joining profile for floors at different heights. This product can also cover slight imperfections due to cuts or chipping of different materials such as wood floors joining to ...
PROFILITEC
This type of profile represents our innovative program for transition and finishing profiles for adjacent floor coverings with different levels. Due to its very special design, VARIOTEC ...
PROFILITEC
Length: 250 cm
The widest range of colours and shapes. A trim for every occasion.
Length: 17 mm - 90 mm
... resistance, physiological harmlessness, the PSO and PSR profiles can be manufactured from selected raw materials according to DIN 7865, ASTM D638 and ASTM D746. PSO and PSR compression profiles are ...
... in blister packs available drilled and adhesive version Membership categories PROFILES FOR FLOORS AND COVERINGS PROFILES FOR FLOORS OF SAME HEIGHT BRASS PROFILES
PROFILPAS
... designed to provide transitions between existing same-height, hard-surface floor coverings (e.g., ceramic tile or natural stone, parquet flooring, concrete pavers, laminate, etc.), primarily in retrofit applications. ...
Schluter Systems
10 mm Aluminium ceramic corner and leveling profiles. It is used for transition from 10 mm height ceramic, granite and mosaic laying to lower flooring. Height:10 mm Profile Length:2,7 ...
ARFEN
These transition strips are for non-ADA required applications. Size Options: 2.5" x 8" x 48" 1” x 4" x 48"
ECOsurfaces Recycled Rubber Flooring
Finishing, transition and height compensation profile without visible fixing • One profile for numerous apllications • Easy installation by dowels or glue • No visible screws MULTIFLOOR ...
DURAL France
The aim of the Pro-Trans profile is to eliminate the poor appearance that comes out of combining two different ceramics or two different surface coatings. The unique colour alternatives enables you to use our transition ...
Protrim Building Systems
... the most preferred profiles among the transition profiles. Curvo Aluminium Threshold Profile can be easily applied to all places and all materials thanks to having ...
MOX Profile Systems
... quickly become dangerous tripping hazards. Transition profiles and compensator profiles from Proline ensure safety by levelling off transitions. The profiles ...
PROLINE
In order to overcome an unevenness of 8 to 12mm, these self-adhesive profiles made of stainless steel can be used to make the transition between any kind of flooring. This product is supplied with adhesive ...
Euroshrink
Flexible floor profile – FLEX BOARD. It is an excellent transition profile to finish arched areas of small bend radius. This product covers the differences in levels and can be used ...
SALAG
Thickness: 8, 9 mm
Length: 2,400 mm
Package Quantity - 25 pcs/carton Installing Way - glue/snap/staple
Length: 24 mm
Imported by GRUPPO STAMPLAST in aluminum, it provides edge protection for the outside corners of tiled surface.
STAMPLAST SRL
• made from polyblend based on PVC (all contents conform to REACH) • to level out floorings • particularly suited where floorings lead out of an area • 1 SU = 4 x 25 m
ISTANBUL PROFİL
BEAUTIFUL AND LIVELY STRUCTURE A varnished Ash floor is spectacular and hard wearing. The wild grain patterns with a clear contrast between sapwood and hardwood will fade over time but the planks will always remain lively. An Ash floor ...
Rappgo
Thickness: 9, 12, 20, 19 mm
Length: 2 m
Wood solid transitions mouldings are available in different sizes to be used in the transition to other surfaces. The mouldings are fastened to a metal rail, and it is not necessary to secure them with ...
Length: 3,000 mm
Used to create smooth transitions between modular and boarded ceilings Corrosion Resistance - C - Reaction To Fire - Reaction To Fire - A2-s1,d0 - Environment - Environment - Fully recyclable
Thickness: 6 mm
Length: 2,400 mm
SPC Reducer Molding is used to create a little ramp that smoothes over the height difference between floors of different thicknesses. Product Advantage: 1. Environmentally friendly, no abnormal odor, suitable for all groups of people ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining