|
|
The ELEACOME range of electric radiating surface systems :
Eléatram is an electric floor heating system used for total or partial heating in private houses, flats and service industries.
Its principle of operation : The floor is heated by a cable at constant power attached to a plastic frame and the combined unit is then laid on an insulating plate in PSE.
Its implementation uses a "wet" solution i.e. under a concrete slab or a fluid screed on which the floor covering will be laid. |
|
A slimming diet for heated flooring !
The ELEACOME range of electric radiating surfaces :
Eléavivre is a low temperature floor heating system suitable for new or existing floors in private housing, apartment blocks and service industries.
Innovation !
ACOME offers a truly innovative product with a heated floor system only 22 mm thick (excluding floor covering), for use with so-called "dry" solutions, i.e. without a concrete slab or liquid screed.
The floor is heated by a round self-regulating cable lying in slots in isolating slabs made in aluminium coated PSE (for improved diffusion and homogenisation of heat). |
|
The overall size of the Vysa-MatTM Popular heating mats has been optimised so that they closely match the most common room sizes encountered.
Their specification is even superior to most others with an IP 67 rating that protects the heating cables in the event of short-term flooding under 1-m of water!
-Vysa-MatTM Popular heating mats rated 100W/m2 are generally suitable only for floor warming and comfort heating. However, larger areas in well insulated homes are often heated adequately using 100W/m2 - in well insulated Scandanavian houses they only use 80W/m2!
-Vysa-MatTM Popular heating mats rated 160W/m2 can provide primary heating for most medium sized rooms, including conservatories, where sub-floor insulation complies with building regulations
-Vysa-MatTM Popular heating mats rated 200W/m2 can provide primary heating for conservatories and all but the smallest rooms in the house
We do recommend that Vysa-PronTM insulation is installed to reduce energy costs and improve warm up times.
|
|
Vysa-MatTMClassic is our latest design of cable and incorporates PTFE (Teflon), which is far superior to any other material for electric underfloor heating applications, as the insulation material. We now offer a 'lifetime guarantee' as Teflon is virtually indestructible.
The exceptionally small profile of the heating cable makes Vysa-MatTMClassic ideally suited to installation within the adhesive layer - the method preferred by professional floor tilers when laying ceramic tiles.
The ultra thin Vysa-MatTM Classic heating mats rated 100W/m2 to 200W/m2 can easily be fitted directly onto your existing tiled floor without needing remove it. Vysa-MatTM Classic can be installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level. Consequently, there should be no requirement to reduce door heights, raise skirting boards etc.
Vysa-MatTM Classic heating mats rated 100W/m2 are ideal for refurbishment projects where they can be installed onto an existing floor structure
Vysa-MatTM Classic heating mats rated 150W/m2 would be suitable as a primary heating source in well insulated dwellings with a large surface area
Vysa-MatTM Classic heating mats rated 200W/m2 would be suitable as a primary heating source in not so well insulated dwellings with a smaller surface area. They are ideal for conservatories. large hallways and lobbies too - anywhere that you need more heat
According to BS EN 60 335 / IEC 335 Vysa-MatTM Classic 100W/m2 can be used directly on top of timber sub-floors without Vysa-PronTM thermal insulation. Vysa-MatTM Classic heating mats rated 150W/m2 can be used on timber sub-floors but BS EN 60 335 / IEC 335 recommends that the power rating must be confined to 100W/m2 unless you install Vysa-Pron thermal insulation on top of the timber sub-floor.
Normally, Vysa-MatTM Classic heating mats rated 100W/m2 would be chosen to simply provide a warm floor so that you have the comfort of walking on a floor that doesn't feel 'cold'.
Naturally, Vysa-MatTMClassic is a twin conductor design with a single 3 metre long 'cold tail' connections lead (only one connection cable to the thermostat).
Vysa-MatTMClassic is supplied together with a 2 metre length of 10mm flexible conduit for the floor sensor (supplied with the thermostats). We include a (red) bung in one end to prevent adhesive from entering the conduit and sticking to the floor sensor.
For the technically minded, Teflon is non-toxic and has excellent mechanical strength, tear resistance and flexibility. It is fire retardant and completely free from any thermal aging effects. It is completely biocompatible and unaffected by fungus, bacteria or mould growth. It is resistant to all chemicals used in building technology and is unaffected by prolonged exposure to UV radiation, sunlight and moisture.
|
|
Loose Wire System
We design our systems using a 3mm, ultra-thin, dual-core heating element. The small cross-section of our element allows it to be installed in a matter of hours without raising floor levels.
There is no need to dig up the floor and no need to mix concrete. Simply fix our heating element to the subfloor, tile straight over and say goodbye to cold feet for good!
|
|
| Domocâble offers comfort d´une soft and uniform heat and d´un agreeably hot ground without cold zone and circulation to d´air. The temperature of surface of the ground does not exceed 28°C. |
|
| Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height. |
|
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.
The fiberglass mesh backing helps to hold the heating element in place for easy, fault-free installation. It also allows the system to be covered directly by the thinset cement used to lay tile or natural stone flooring.
Full room heating systems generally consist of a single Honeywell heating “roll” of predetermined length. The system is placed in position using the easy-to-follow floor layout diagram provided with each kit, with a pre-attached lead that runs to a thermostat and/or junction box for power. No additional installation wiring is required. |
|
| ... products without information |
| |
The GOLD 1300 series is the name we give our weatherproof all-round radiant heaters for outdoor use. Regardless of the weather or time of year, the radiant heaters of the GOLD 1300 series can be used anytime and anywhere.
|
|
The TERM 2000 radiant heater series, which is made of massive aluminium, was enlarged by a completely wateproof model. The TERM 2000 IP65 is exclusively equipped with an infrared gold-tube by Philips and achieves 1,650 W. Due to its open design without protection glass, the TERM 2000 IP65's tube achieves a long durability up to 5,000 hours. Since it has an breadth of 61.5 cm and a height of only 9.5 cm, this very slim and elegant heater is predestinated for heating outdoors and ideally suited for implementation in tent and canopy systems.
|
|
TEGH: Twin Eagles Gas
Infrared Heater
#304 stainless steel welded construction
Two settings: High - 37,000 Btu and Low - 25,000 Btu
Battery ignition with 100% safety pilot
Wireless remote control
Easy to install
no electrical installation required
Long, exceptional heat coverage
Decorative safety grill that provides shielding from wind. Wind proof up to 15 MPH.
Complete with mounting brackets, gas hose and AC adaptor
Natural Gas or LP (Conversion kit available) |
|
| The amba range is a quartz outdoor heater which is designed to warm people and objects rather than the air in between. |
|
| The rubi heater is designed for indoor or undercover outdoor use. It is suitable for a number of commercial uses as well as domestic conservatories, workshops and similar. |
|
Puissance 1.3 Kw, 5.7 Ampères ou 1.5 Kw, 6.5 Ampères
230 VOLTS
Distance minimum du plafond : 500 mm
Hauteur conseillée d'installation : 2500 mm
Livré avec prise étanche et câble, charnière de fixation.
Garantie 1 an.
Durée de vie de la lampe PHILIPS: 5000 heures.
Avantage du chauffage halogène à quartz : Chaleur radiante directionnelle et instantanée ; Une solution économique et sans danger de chauffer les terrasses car le chauffage halogène à quartz ne chauffe pas un volume mais les personnes dans un rayon bien défini ; Coût horaire estimé à 3 fois moins cher que le gaz: 0.13 €/KW ; Pas de stockage de bouteille de gaz ; Pas d'encombrement au sol ; Silencieux et inodore ; Ne requiert pas de circulation d'air, conforme aux normes de sécurité en vigueur ; Attractif, diffuse une lumière douce et orangée ; Ecologique. |
|
| ... products without information |
| |
|
|
see the results for the following category
