|
|
The ELEACOME range of electric radiating surface systems :
Eléatram is an electric floor heating system used for total or partial heating in private houses, flats and service industries.
Its principle of operation : The floor is heated by a cable at constant power attached to a plastic frame and the combined unit is then laid on an insulating plate in PSE.
Its implementation uses a "wet" solution i.e. under a concrete slab or a fluid screed on which the floor covering will be laid.
|
|
Underfloor heating suitable for fitting around the perimeter of an un-carpeted room which requires high-output heating with a fast response time. Typical applications are garden rooms and galleries, entrance halls, and traditional greenhouses and conservatories.
The heating system uses convectors, set in a duct and covered with grilles and works efficiently off existing central heating without fans or additional pumps. Marston & Langinger offers a design-layout service, and supplies heating convectors, baffles (to improve air circulation), alloy grille-supports, trims, and grilles in various sizes, combinations and patterns. In glass buildings with electric ventilators, a Marston & Langinger automatic controller can be used to operate both the heating and ventilation to give a balanced temperature, whatever the weather outside.
|
|
A slimming diet for heated flooring !
The CLIMACOME range of hydraulic radiating surface systems:
Vivracome is a low temperature warm water floor heating system suitable for new or existing floors in private houses, apartment blocks and service industries.
Innovation !
ACOME offers a truly innovative product with a heated floor system only 22 mm thick (excluding floor covering), for use with so-called "dry" solutions, i.e. without a concrete slab or liquid screed.
Its principle of operation is to circulate water through polyethylene tubing (PEX) lying in slots in insulating slabs made in aluminium coated PSE (for improved heat diffusion and homogenisation).
|
|
The CLIMACOME® range of hydraulic radiating surface systems :
Thermacome® is a low temperature warm water system used for total or partial heating and/or cooling in private houses and apartment blocks, in the tertiary sector : offices, factories, schools, hotels, restaurants, churches, etc. and in sports centres : gymnasiums, swimming pools, stadiums, etc.
Its principle of operation is to circulate water through polyethylene tubing (PEX), clipped in place in self-fitting tube guide holders in PSE insulating slabs.
Its implementation uses a "wet" solution i.e. under a concrete slab or a fluid screed on which the floor covering will be laid.
All the components are compliant with the current regulations
|
|
|
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.
|
|
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.
The fiberglass mesh backing helps to hold the heating element in place for easy, fault-free installation. It also allows the system to be covered directly by the thinset cement used to lay tile or natural stone flooring.
Full room heating systems generally consist of a single Honeywell heating “roll” of predetermined length. The system is placed in position using the easy-to-follow floor layout diagram provided with each kit, with a pre-attached lead that runs to a thermostat and/or junction box for power. No additional installation wiring is required.
|
|
|
Domocâble offers comfort d´une soft and uniform heat and d´un agreeably hot ground without cold zone and circulation to d´air. The temperature of surface of the ground does not exceed 28°C.
|
|
To be
electrical radiating ground
System S.R.E is made up of an electrical resistance with enmeshes self-adhesive that facilitates the installation, in addition incorporates an advanced /programador regulator to optimize the power consumption to the maximum.
|
|
| ... products without information |
| |
With BRESPA® climate floor, the thermal mass capacity of concrete is utilised to cool and heat rooms. Water circulating in a tube system in the lower flange of the slabs has a balancing effect on room climate conditions. Furthermore, the covers 35 %u2013 45 W/m² peak loads and constant loads. This reduces heating installation and operating costs.
BRESPA® climate floors are available in thicknesses of 20, 26 and 32 centimetres. Depending on the floor thickness and the loads, spans up to 12 metres are possible without intermediate supports.
|
|
|
|