|
|
Renewable Energy Development
Light fitting of aluminum and glass Eclisse type IP66 IK10 Class III
Light height of 4 metres
Adjustable through 360 °
12 LEDs at 120 lumens per Watt
Shrunk tubular post of treated galvanized steel
Thermo-lacquered finish in choice of RAL colours
Head diameter 90 mm
Diameter at base 160 mm (batteries)
Photovoltaic panel of 100 cm x 70 cm
|
|
The one, management board ActivaSun conceived and made in France
leading-edge technology in the management of solar light allows
to control several parameters:
- Adjustment of the power of lighting on 3 levels/Adjustments of the level of the battery on 3 levels
- Management of the power of lighting according to the consumption of the beach of tension.
- Battery preserved (impossibility of unloading) for one optimized lifespan 5 with 7ans.
- Adjustments of the threshold of lighting and exctinction (in connection with the production of the solar panel)
- Programmable Schedule with lighting.
|
|
|
New solar lighting Sun-26 (Sox 26) uses photovoltaic cells to convert the solar radiation into emectric energy. This energy is emmagisinée in a battery during the day and is restored the night to supply a lamp with sodium vapor.
|
|
Self-powered street lamp with photovoltaic system
- Economical
- Easy to install
- Non-polluting, conforms to Kyoto protocolo
- Easily transported for temporary and emergency lighting
- No electricity bills (Enel)
Advantages
The photovoltaic solar lighting system has several important features::
- It does not require mains electricity supply:
every pole is independent and is no way connected to the others;
- Energy is generated exclusively from sunlight:
it is stored during the day and supplied at night;
- No operator action is required:
once programmed, the electronic control unit turns the system On and Off independently;
- The system is highly reliable:
since it is totally built with solid state components;.
|
|
AZULY supplements its solar aeolian offer by a photovoltaic group. .. . Ready to install! The LED solar mast provides an effective and comfortable bright light. The photovoltaic panel supplies 28 or 56 LED according to model. The electronic management card insures different settings: automatic start, illumination length, periodicity... The equipment height prevents deteriorations.
This monoblock compact group, on one aesthetic concrete mast, is ready to install.
Applications: insulated sites, bus stops, walk ways, school bus operation, technical buildings, waste reception centers, sports fields surroundings, but also rail and waterways network, Condominium parks, parking lots . . .
|
|
|
|
|
|
The new lamppost to solar energy photovoltaic NTH LED-Light, thanks to a new source of light realized with luminous diode valves (LED), marks important carrying out in the systems of independent lighting, introducing levels of yield and reliabilities that appeared ago unattainable till little years, joined to a more and more competitive cost.
The peculiar characteristics of NTH LED-light are the following ones: Light of color WHITE MAN therefore a better perception of the colors and the details from the human eye to illuminamento parity
- Unidirectional Light emission therefore total luminous pollution absence
- Illuminamento of the advanced street plan to that one of a lamp to the sodium to lowland pressure to power parity
- Advanced Duration to any type of lamp to filament or discharge of gas with a average life before an breakdown (MTBF) of approximately 100.000 hours
- Luminous Source adjustable and composed from a high number of independent units
- Insensibilità to the temperature, therefore optimal yield also in the more rigid climates
|
|
|
Tapered cylindrical wooden shaft in glued laminated timber (GLULAM and FSC certifi ed) designed according to the Aubrilam HTE-E process in conformity with EN335, EN386 and EN350, fi nished with three coats of woodstain. Cylindrical base in galvanised steel fi nished in powder coated polyester. Ventilated base. Arm and fork supporting the solar panels in aluminium fi nished in powder coated polyester. Solar panels in poly-cristalline silicon. Electronic regulator with automatic surveillance of lighting intensities (night/day diff erentiation). Programmable built-in timer (lighting evening or dawn). Optimised battery management system. Weatherproof lead batteries with gelled electrolyte, maintenance-free. LED LUXEON InGaN Luminaire with polycarbonate diff user and aluminium body.
|
|
BATTERY CUPBOARD:
Made out of 3 mm thick hot-galvanised plate, with a polyurethane lid.
COLUMN:
Made out of a 4 mm thick DIN 2440 hot-galvanised steel tube, 100 mm in diameter.
SOLAR PANEL SUPPORT:
It consists of a 4 mm thick curved hot-galvanised steel tube, 90 mm in diameter, and a 3 mm thick hot-galvanised plate protecting the rear of the panel.
NUTS AND BOLTS:
In A4 stainless steel.
|
|
|
Fruit of a step of éco-design, floor lamp AUTONOMA is dedicated to the lighting of isolated site. Equip with LED of power which combines luminous performance and energy saving, it is also programmable and intelligent thanks to its presence detector.
|
|
|
|
|
|
TECHNICAL CHARACTERISTICS
FREELUM is a modular unit composed of four parts to fit together.
Total height : 4m.50 to 5m., (with the solar panel), wholly in aluminium, thermo-lacquered (polyester powder)
1°) THE SOLAR PANEL :
- Dimension : 1200 x 520 mm
- Power of charge : 80 to 85 Watts/p
- Fixing by an articulated infrastructure swivelling on 360° allowing the South orientation of the solar panel as well as its, optimal incline angle (45 to 60°).
- Monocrystalline type, life approximately 20 years.
2°) THE LED SOLAR LAMP (IP66) :
- 366 led of 27 candelas, daylight type.
- Life approximately 80.000 hours.
- Patented optoelectronic system EVERLUM allowing the best distribution of the led light on the ground, excluding any luminous pollution.
- Tight infrastructure, shock-proof.
3°) THE MIDDLE TUBE
4°) THE BASE IS COMPOSED OF :
a) TIGHT MOBILE SLIDING TRAP
- Located on the low base plate of the unit, this patented sliding system (ROLLTRAP) protects electronic control and regulation of energy.
b) ELECTRONIC CONTROL AND REGULATION OF :
- The charge of the batteries from the photovoltaic module.
- The current limiting of the leds
- The power of lighting according to the charge of the batteries.
c) THE BATTERIES CONTAINER
- Dimension : 500 mm of height, diameter 300mm
- Fixing with two sliding rings
- Locking anti vandalism on the base
- Contains 2 solar batteries of 40 Ah each one, life of 5 to 7 years.
d) THE BASE TO FIX ON THE GROUND:
- On a base with six points of fixation, to fix on the concrete base with an electrolysis protection according to instructions of installation.
|
|
|
|
|
|
A revolutionary road lighting fixture uses the best technologies available to increase safety for pedestrians, while reducing environmental impact.
Designed by Giugiaro Architettura and manufactured by Disano illuminazione, OnOff was launched at Remade, Portugal, the exhibition of high-tech products that are built using recycled and recyclable materials.
The project is part of a number of events promoted by Cestec, a Lombardy-based company created to support manufacturers in the production of excellent products, using environmentally friendly recyclable materials.
OnOff is a lighting fixture specially developed to increase safety for pedestrians and to reduce environmental impact starting from the production stage.
The luminaire is made of aluminium, an entirely recyclable material, whose design combines a pole and a lighting fixture into one single object.
As to consumption, the opportunity to exploit solar power is the most interesting aspect. In fact, a photovoltaic panel is fitted on the lamp cover. That means that OnOff can be powered independently without connecting it to the mains. The batteries provide in any event a five-day run time in the absence of solar radiation.
The photovoltaic system turns solar power into electricity, thanks to the use of semiconductor materials such as silicon, which is reduced to sheets to create photovoltaic cells.
|
|
Daylight received by a solar module fixed at the top of the floor lamp is transformed into electricity. This one is stored the day in the batteries, then is used starting from the twilight to ensure a lighting of 8:00 (optimum condition of sunning).
Luminous power of the projector (3600 Lumens) with for vocation the lighting of security of allotments, carparks, industrial park, isolated bus shelters.
Characteristics:
Height of mast of 5 mêtres. Height of fire of 4 mêtres. Lighting: 25 luxes with the foot of the candelabrum, 2 luxes with 10 Mr. Lampe: SOX 26 W, Sodium low pressure
|
|
The Verdant Walk, Cleveland, OH
Project concept and design by North Design Office for Cleveland Public Art
Photography: North Design Office
The green city of the future shines through this sculptural installation for a Cleveland art park. The park reflects two forces: the city’s heritage of craftsmanship and its new green agenda. We covered irregular forms with flexible, solar-paneled skins; these charge LEDs that glow within the forms at night. The designer asked that our frame look “hand bent”, hence the organic kinks. In winter, the fabric is removed to showcase the metal armatures as sculpture.
|
|
|
The new Solar Street Light HELIOS SOX 26 VARIO is a revolutionary system composed of photovoltaic modules which converts the sunlight into electric power. This energy is stored in a battery during the day and made available in night-time to power a sodium vapour lamp, also thanks to the new intelligent charge regulator GENIUS 15 VARIO. This is the ideal answer when there is the need of lighting squares, streets, crossings and no available electric power grid nearby. The new Solar Street Light HELIOS SOX 26 VARIO typically starts lighting after sunset and stops at sunrise automatically.
|
|
Together of lighting with solar energy, Hélios offers an ideal solution
for the zones except electrical communication. Simple or double solar panel,
with adaptable slope. 1 or 2 batteries placed in a careenage in thermoformé ABS. System of electronic regulation programmable.
2 possible types of lighting:
- Body profiled in thermoformé, optical ABS road and clear closing
out of methacrylate; 18 to 42 W Fluo compact.
- Discera 400, cast aluminum body, optical STX minis-R and clear tempered glass closing; 20 W Metal Iodides.
Installation on mast steel Ø 127 mm,
height from 3,00 to 5,50 Mr.
Thermolaquage Ral or Futura, color with
choices, the parts in ABS are always gray.
|
|
|
|
|
|
InLighten® Light Shelf is a series of standard design elements that are assembled to passively channel natural daylighting into an occupied space.
Kawneer's Light Shelf features an extruded aluminum chassis system and Aluminum Composite Material (ACM) panel surfaces. Assembled and erected, these components serve as an interior extension to a curtain wall horizontal, reflecting sunlight deeper into the interior of a building by "bouncing" natural light up to the ceiling.
Architectural light shelves have been proven to reduce requirements for perimeter artificial lighting, thereby conserving electrical energy costs.
The InLighten® Light Shelf represents another Kawneer solar control product solution, and is designed for integration with other products to fill curtain wall or punched openings.
Key Features Include:
Economical, lightweight and easy to install
Extruded aluminum chassis system and Aluminum Composite Material (ACM) panel surfaces
ACM panel surfaces are available in a variety of painted finishes
Custom fascia profiles available
End caps available for punched opening applications
Extruded components can be painted or anodized
Standard designs include standard or custom fascia cap or continuous panel
Field fabricated and assembled from stock lengths
Can be attached directly to Kawneer 1600 Wall System®1, 1600 Wall System®2, 1600 Wall System®3 and 1600 Wall System®5
Applications integrating InLighten® with 1600 Wall System®1 and 1600 Wall System®5 can provide dual energy savings by incorporating 1600 SunShade®
|
|
|
|
|
|
Direct sunlight causes glare and unwanted heat on window areas. Outlook Sunscreens are carefully designed and installed to deflect and eliminate this problem, without shutting off the outside view. Manufactured from durable aluminium, Outlook Sunscreens allow free movement of air around building exteriors and yet add a distinctive design element that can enhance a buildings appearance.
Webforge offers a comprehensive service for the design and manufacture of sunscreens, specifically for your project and budget.
Outlook Finishes
Outlook Sunscreens are available in a wide range of colours and can be anodised or powder coated. Special requirements in colour or finish can be catered for. Outlook Sunscreens can also be used in a natural mill finish.
Approved Testing
Extensive wind tunnel and impact testing by C.S.I.R.O., Monash University and the James Cook University has shown Outlook Sunscreens will meet the tough standards required for cyclonic and debris protection. The proven strength of Outlook also makes it an ideal security medium.
|
|
|
|
|
|
Webforge privacy screens are manufactured in Europe from aluminium. Manufactured by the press locked method they can be provided in either anodised or powder coated finish in a wide range of colours. Available with aperture sizes varying from 20mm square (22mm x 22mm) up to 50mm square(55mm x 55mm) in 10mm increments. Using slim line aluminium load and cross bars these screen panels are suitable for a wide range of applications both internal and external.
Used extensively throughout Europe, externally these screens provide the perfect solution for disguising common eyesores such as bin storage areas, pool equipment and air conditioning platforms and other service areas.
Internally they are ideal for suspended ceilings and room dividers or as a protective screen to an open flight of stairs.
Privacy Louvres
This newly developed full press locked louvre panel combines excellent technical qualities with elegant design and thus offers a variety of new solutions within the current louvre market.
With this new louvre panel engineers and architects can design sun control systems, façade elements or gangways without destroying the architectural concept of the building. When used in gangways or walkways these louvres provide a high level of privacy with the angle of the louvre blade reducing visibility from below the walkway. With a variety of blade angles available this new product is the product of choice in a wide variety of applications.
Cross bar (louvre) lengths are limited to 1200 mm.
|
|
|
|
|
|
Lockline aluminuim screens enhance privacy as well as security in a myriad of applications both inside and outside the home. The modern stylish look of Lockline lends itself to today's designs and a wide range of finishes are available. Mill finish lends itself to the industrial look however where a softer look is required anodising and powder coating are both available. Powder coating is available in an extensive range of colours for both internal and external applications. With a range of options of aperture sizes and panel depths Lockline has proven its versatility in a wide variety of projects. Designed to reduce the effects of direct sunlight on a building façade Lockline sunscreens reduce energy consumption while at the same time providing a near uninterrupted view of the surroundings. Approximately one third the weight of an equivalent steel profile, Lockline aluminium sunscreens offer construction savings as they can be installed easily without the need for bulky support structures.
Lockline sunscreens can be installed vertically, horizontally or at any angle in between. When installed horizontally it is possible for the sunscreen to provide a dual role as both sunscreen and as a walkway for maintenance access or for window cleaning. Vertical screens on the other hand can be used to hide unsightly areas around the building including bin storage areas, plant and equipment locations and vehicle access ways. Lockline screens can be manufactured in individual panel sizes up to a maximum of 6m x 1.2m. Larger areas can be achieved by joining edge bars or extending the swage bars.
|
|
|
|
|
|
The solar energy street light uses the highly effective mono crystal(polytropism) silicon sollar cell power supply electricity.Uses the mainte-nance-free seal accumulator cell storing electrical energy.With highly effective green special lamp illumination and uses the advanced sufficient electric discharge and the illumination controi circuit. Has the nature reliability.the luminous high efficiency, brightness big, the installment conventient does not need to lay down the etectric cable , does not need to exchange the electrical energy and the electrical bill. Uses the direct current power supply.photosensitive control.sale reliable. energy conservation economy, environmental proiection, practical (the basis disposes white model is different, Charges one day for a 3-7days use) the life to be long (solar cell to be possible lo use 15-20yeris accumulator cell to be possible to use for 5-7years).
Solar light can be used broadly in lighting of such outdoor sites as family villa.unit garden, civil plaza, environment protection community.
|
|
In order to meet the concerns relating to excess energy consumption, Blachere illumination has invented the hybrid power supply system for lighting motifs (BHS system).
This exclusive innovation (European patents filled) enables LED lighting motifs to be 100% energy self-sufficient (specific range).
The principle consists of rechatging a battery during the day using a mini solar panel in order to supply power for the motif at night.
During sunny periods, the battery charges fully, which is sufficient alone to supply the motifs completely independently. During cloudy weather, when the battery is not sufficient, the system automatically switches to the network supply, guaranteeing continuity of operation of the motif.
For this reason, and thanks to the BHS Blanchere system, the decoration will be supplied as a priority by solar energy (total energy saving) or by electricity if the climatic conditions are unfavourable.
|
|
New spaces are about to emerge, both inside and outside, with the new Viteo Gardenwall, designed by the Australian Gordon Tait.
The modular system consisting of stackable planters opens up endless opportunities for designing and celebrating nature. From the 3rd row in height the construction is being enforced by invisible static elements, which are being attached between the single containers.
Equipped with plants that grow through openings they make room dividers close to nature, which show an extraordinary form of greening merging functionality and aesthetics.
|
|
|
|
