|
|
|
UPLIGHT IP65 floor/ground recessed luminaire. Steel body with polymer outer casing and upper trim ring in silver anodised aluminium. Adjustable tilting reflector (max. 60°). IP65 protection. With transparent glass protection. For QT-32 incandescent or HIT metal halide discharge lamps.
|
|
|
The Gira LED illumination enables the targeted use of lighting accents. For instance it is used to illuminate stairs and dark corridors or outdoor pathways and therefore provides extra safety for walking and for orientation both inside and outside. Gira offers a wide range of LED products and accessories adapted to the its switch ranges. Pictograms and inscriptions allow LED lights to be expanded to illuminate information signs which can be used in a multitude of ways. The LED technology used in our products ensures durability and economical power consumption
|
|
New family of rectangular outdoor luminaires in two versions: flush floor-mounting (STEP IP67) and suspended-recessed mounting (STEP-AIR IP65) with the relevant accessories.
The STEP is a luminaire that can be stepped on and its rectangular shape permits the use of T5 and TC-L lamps with symmetric or asymmetric reflectors and bands of different-coloured LEDs. The STEP AIR is an elegant sealed luminaire which can be installed in continuous lines, as in the case of public transport stations, or affixed to columns and stakes for lighting passageways.
Recessed luminaire STEP. Body made of extrruded aluminium protected with poliester painting. Stainless steel frame and transparent tempered glass. Available for LEDs RGB.
|
|
CUT LED
Recessed luminaire for floor CUT LED, frame, in stainless steel, square, cover, in glass, matt, protection degree IP67, with 9 x Light emitting diode, red, with electronic transformer, L = 120mm, B = 120mm, EL = 110mm, EB = 110mm, ET = 122mm
|
|
PERSEO - Recessed lighting fitting for floors
Recessed drive over lighting fittings that grants an IP67 protection degree.
They mount a 220 mm diameter steel frame and a transparent tempered glass
diffuser.
They are available in different models and able to host a compact fluorescent and incandescent lamp or metal halide lamp with an asymmetric or adjustable
symmetric reflector.
|
|
DIONISIO - Lighting for outdoor, recessed floor
The extremely reduced depth of the structure and the very high luminous
rendering are carachterizing the floor recessed lighting fittings called Dionisio.
Dionisio has a depth of 71 mm only recessed box included, and can host the
compact fluorescent bulb Micro-Linx with integrated reflector that distinguishes from the others for the compact profile and the high luminous rendering.
|
|
Spider Incasso - Lighting for outdoor, recessed floor
Outdoor lighting fitting created to be used on the floor but suitable for walls or ceilings application.
It's realized with an extruded anodised aluminium structure, die-cast aluminium end caps, silicon gaskets and A4 stainless steel screws.
It can host fluorescent and xenon lamps and LEDs.
|
|
DIANA - Lighting for outdoor, recessed floor
Floor and wall recessed luminaire for outdoor use, water and powder
proof, comprensive of recessed housing.
Body, frame and screws are made of stainless steel.
The optical opening is closed by a ring complete with shatterproof tempered
glass for vehicle passage use and silicon rubber gasket.
It can host one halogen lamp 12V or 230V, or miniLEDs and power LEDs in
white or blue colours.
|
|
|
Maxitatto is a walk-over ground recessed light for outdoor use with 70W metal halide lights with cold glass, and 150W with A4 stainless steel ring or all glass finish. EN AB 47100 die-cast aluminium, oxidation-resistant body and cast aluminium rough–in housing. Transparent tempered glass diffuser. Symmetrical and asymmetrical spot-type optics and wall-washer for illuminating medium-large facades while also saving energy.
|
|
|
TITANO: ground or buried fixture for direction lighting. IP67 protection grading. Stainless steel body. 3 year anticorrosion guaranty. Can withstand a vehicle with 3,5 tons per a wheel at a max. 30Km/h.
|
|
LED paver light
Can be manufactured to measure or according to a model (natural stone or concrete). It can be equipped with 5 up to 35 LED in any colour.
|
|
|
LED screens from ground mounting applications will be a new opportunity for the professional lighting designers, thanks to GRAPH-i-Dune. Many areas, including pedestrian zones, will be inset with a compact full-colour solid state lighting unit, covered by a glazed glass, which will create, assembled in combination with other units of its kind, virtual in ground screens for image projection or colour changing effect. Featuring an IP67 weather protection rating as well as a DMX addressing automatic assignment, GRAPH-i-Dune can easily blend in any sort of outdoor or indoor floor, shaping a brand new outstanding graphic, pattern, video or image ambience. Whereas light, colour and visual concept converge to create a dynamic, extraordinary, brilliant lighting performance, the new artistic medium for eye-catching display will be GRAPH-i-Dune.
|
|
|
AGORA': wall recessed fixture for TC-D fluorescent lamps.
|
|
ALTAIR
Recessed lighting fixture water proof IP67
Aluminium body with anodic protection; high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
More materials and finishing for the closing disk (aluminium, 316L Stainless steel, special painting any colour on demand).
Insulation class ; I
Static charges resistance : 1000Kg
Directional optics +/- 25° with locking (except fluorescent versions)
Product supplied with 1m cable and PVC reservation box and insertion collar.
|
|
Also when it come to canopy and recessed lighting, the strengths of Square series is its versatility. No detail has been left to chance. High performance optics, accessories for easy installation and maintenance, screens to reduce glare and improve visible comfort, everything is made to make Square, again, the optimal choice when it comes to this kind of applications.
Square has the optimal combination for every kind of application, whether it is a under-canopy for an entrance to a shopping centre, a parking lot, a gym or a petrol station. The components are made with the same high quality as the other fixtures in the Square series: High-pressure die-cast aluminium with shockproof, heat-resistant tempered glass with the Deltaguard process, for a better resistance against all corrosive phenomena and colour changes due to exposure to UV rays. At last, we have the optics. As always it is from these key elements that a Ruud product originate.
|
|
VEGA MICRO
Lighting and signaling small HBLED recessed lighting fixture water proof IP67.
Various configurations for materials and shape: (aluminum, stainless steel 316L, marine quality, with a supplementary passivation treatment, Brass and copper).
Insulation class III.
Product supplied with 2x0.75 mm² cable 1m long.
Need of a separated converter power supply.
|
|
|
|
|
|
GEMINI LED RECESSED
HBLED Recessed lighting fixture water proof IP67
Aluminium body with anodic protection (65mm depth) ; high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
More materials and finishing for the closing disk (aluminium, 316L Stainless steel, brass, special painting any colour on demand).
Also available in specific colour on demand for monochrome version.
Static load resistance: 1500Kg
Product supplied PVC reservation box and insertion collar.
DIRECTIONAL OPTIC
Directional optics +/- 15° with locking
Monochrome version, Insulation class III, Converter and IP68 kit supplied, with 1m cable length
RGB version, Insulation Class III, supplied with a 6x0.22mm² cable 3m length and equipped of special connector to interface the other components of RGB piloting system.
FIXED OPTIC
Insulation class III
Monochrome version supplied with 1m cable
Need an external converter that can be placed in the reservation box.
RGB version supplied with a 6x0.22mm² cable 3m length and equipped of special connector to interface the other components of RGB piloting system.
|
|
QUADRO & QUADRO MINI
HBLED Recessed lighting fixture water proof IP68 for installation wall, roof and ground and full immersion.
Body made of stainless steel 316L, marine quality, with a supplementary passivation treatment, extra transparent tempered glass, silicon sealing gasket.
Static charges resistance: : 500 Kg.
Fixed asymmetrical luminous beam
QUADRO: with integrated converter, Insulation class I, supplied with 3x1 mm² cable 1m long.
QUADRO FULL IMMERSION with integrated converter, Insulation class III, supplied with 2x0.75 mm² cable 3m long.
QUADRO MINI, without integrated converter, insulation class III, supplied with 2x0.75 mm² cable 1m long.
|
|
General
Order code 6842.B4 alu grey
Mounting Ground recessed
Lamps description 1 x PAR38 120w E27
Color Alu grey
Notes HPF on request
Optical
Reflector finish Anodized pure aluminium
Aiming Fixed
Luminous distribution symmetry Symmetric
Electrical
Emergency Without
Voltage (V) 230
Physical
Place of use Outdoor
Cutout shape Round
Cutout diameter (mm) 230
Recessed depth 230
Construction materials Corrosion resistant die-cast aluminium
Weight (kg) 4.4
|
|
available colour: ALU ANODISED 213 32 05 ANO
fixation: FLOOR - WALL RECESSED MOUNTED
light: DIRECT
lamptype :
lamp : 1 x QR-CB51 - GX5.3 - 20 W (max)
voltage : 12V
control gear : EXCL.TRANSFO
class: III
protection class: IP65
norm: CE
distance: 0,5 m
netto weight: 0.7 kg
cutout: 112 x 112 mm
min depth for recessing: 125 mm
|
|
m44
Recessed IP66 projector for indoor and outdoor applications, consisting of an mat aluminium cylindrical body and a round or square bezel in mat anodized aluminium. M44 is complete with GU5,3 lamp-holder for max 35W dichroic lamps diameter 51. It may be recessed by means of the relevant wallbox to be fitted into floor and the wall
|
|
Lamp: T2 6W
Lamp type : fluorescent
Lamp base : GX53
Light distribution: down
Power supply : 230V-50Hz
Degree of protection: I
Ip rating : IP67
Material: Aluminium
Glowtest: no
Standard: EN60598-1
Fixation: floor
Mounting: recessed
Weight: 0,86 kg
|
|
Drive-over in-ground floodlights
Floodlights · Symmetrical
Protection class IP 67
Pressure load 5000 kg
Installation depth 190 - 330 mm
· for low voltage tungsten halogen lamps QT 12-ax
· for high voltage tungsten halogen lamps QT 32
· for discharge lamps HIT-CE · HIT-TC-CE
· for discharge lamps HI/HST-DE
· for discharge lamps HME
8617 - Lampholder GU 6.5
Cover ring made of stainless steel
Luminaire housing and installation housing made of aluminium
Clear safety glass
Reflector of pure anodized aluminium
|
|
Drive-over in-ground floodlights
Floodlights
Protection class IP 68 10 m · Safety class I
8042 · 8058 Safety class III
Pressure load 2000 kg
Installation depth 95 - 160 mm
· for low voltage tungsten halogen lamps QT 9-ax
Cast stainless steel and stainless steel
Clear safety glass with built-in louvre
Reflector of pure anodized aluminium
|
|
BEGA Light building element
Protection class IP 65
· for discharge lamps HIT-CE
Die cast aluminium, aluminium and stainless steel
Safety glass
Reflector of pure anodized aluminium
Door and connection box 632
Anchorage section made of galvanized steel is an
integral part of the luminaire
On request, we supply mounting base 829 for
bolting to a foundation without extra charge.
|
|
Catalog #:IFS70
Description:Indoor/Outdoor Step Light
Lamp:9W TT 2-pin / 13/18/26W DTT 4-pin
Ballast:Electronic 120/277V
Listings:NRTL
|
|
A ground recessed floodlight designed specifically for decorative lighting effects, ideal for paved, concrete or grassed areas where raised lighting would be too obtrusive.
Choice of symmetric or asymmetric reflectors
Wide variety of attachments : Filters - red, blue, yellow and green Grilles - 2 options for directional lighting, 45° and vertical
2 sizes for a discrete integration
Choice of lenses - clear and opal
3 light sources - high pressure sodium, metal halide, or fluorescent
Low temperature versions available
|
|
Recessed LED Ground Light Type AT756-WW
Unostentatious design yet high in functionality! That´s what we wanted to achieve with the developement of the recessed LED ground spotlight type AT756-WW. Of course only the newest LED technology was used throughout processing and the product incorporates all advantages LED technology has to offer.
Simply designed
The Recessed LED ground light AT756-WW is perfect for illuminating facades, paths and public places as well as for industrial uses. Needless to say our LED spot is entirely mantainance free and low in energy use.
Shapely
Its case is waterproof, stays dust-free and is entirely made out of aluminum. Covers are made from UV resistant polycarbonate and stainless steel. Upon request LED spot AT756-WW is also available in black.
|
|
In-grade adjustable w/ clear glass - low surface temperature
Designed for up lighting trees, flags, walls, columns, signage and other interior and exterior locations featuring low surface temperature lens.
Flush in-grade luminaires with adjustable lamp enclosure for symmetrical or asymmetrical light distributions. Clear tempered glass.
U.L. listed, suitable for wet locations.
Protection class: IP 67
Finish: Machined #4 stainless steel.
|
|
|
|