|
|
|
NIC 105 direct radiation wall light, with tempered safety glass, extruded aluminium body and injected aluminium wall support, both lacquered in texturised grey polyester. For PAR 20 direct to grid lamps.
|
|
|
NIC 105 wall light with direct-indirect radiation, tempered safety glass, extruded aluminium body and injected aluminium wall support, both lacquered in texturised grey polyester. For PAR 20 direct to grid lamps.
|
|
|
Wall light manufactured in extruded, injected aluminium, lacquered in texturised grey polyester and Alodine 1200 anticorrosion treatment on the base. Its robust construction (IK10) provides the necessary safety and soundness required in all public spaces, while its organic design guarantees a high level of visual comfort.
|
|
|
BLOC wall mounted luminaire made of die cast aluminium and polyester painted. Grey and blue as standard colours for, direct-wide and indirect-narrow beam. With an IP-65, which allows either interior or exterior installations. The brachet to fix the luminaire on the wall allows a perpendicular or parallel installation. For 35w HIT, 60w A-60, 60w QT-32 and 18w TC-T.
|
|
|
BLOC wall mounted luminaire made of die cast aluminium and polyester painted. Grey and blue as standard colours for, direct-wide and indirect-narrow beam. With an IP-65, which allows either interior or exterior installations. The brachet to fix the luminaire on the wall allows a perpendicular or parallel installation. For 35w HIT, 60w A-60, 60w QT-32 and 18w TC-T.
|
|
|
PROA direct radiation luminaire with street reflector. Manufactured from injected aluminium, lacquered in texturised grey polyester, with a tempered glass protector. For CPO-TE lamps
|
|
|
With cast aluminium body and exterior framework, lacquered in matt light grey with opal polycarbonate diffuser and stainless steel screws. Available in two sizes: 265mm and 360mm diameter. The opal polycarbonate diffuser emits a dim light and is protected by a decorative aluminium grid.
|
|
|
NIC 175 wall light with direct or direct-indirect radiation, with tempered safety glass, a spinned high quality aluminium reflector, extruded aluminium body and ceiling support made from injected aluminium, both lacquered in texturised grey polyester. Ideal for installing on facades in residential and urban areas.
|
|
|
MINI PROA direct-indirect radiation luminaire with symmetrical reflector. Manufactured from injected aluminium, lacquered in texturised grey polyester, with a tempered glass protector. For QT-DE, HIT-DE, and HST-DE lamps.
|
|
|
A range of ceiling/wall outdoor luminaries for direct and diffused light. Degree of protection: IP65. Housing and body in extruded aluminium with details in die-cast aluminium or mixed plastic materials. The light source is hidden behind a single reflector, which is rotated by a universal joint to allow for different light solutions. Non-dimmable electronic controls are self-contained within a remote extruded aluminium housing.
|
|
|
Wall luminaire for residential and commercial outdoor applications with IP65 degree of protection. Body and frame in powder coated die cast aluminium. Perimeter silicon gasket. Asymmetric anodised aluminium reflector. Finished white, anthracite or grey. Non-dimmable conventional and electronic gear. Single ended halogen, discharge and incandescent lamp options round off the range. Dew with asymmetric light distribution, is offered with a transparent faceted glass and eye-lid to control the vertical light output. The product conforms to the European Norms preventing light pollution.
|
|
FARO
Wall-mounted luminaire FARO, for 1 x compact lamp 18W with lampholder 2G10, in aluminium, light silver, opal polycarbonate diffusor, protection class I, protection degree IP54, with electronic control gear, B = 160mm, H = 288mm, A = 98mm
|
|
|
MINI PROA direct radiation luminaire with flood optics. Manufactured from injected aluminium, lacquered in texturised grey polyester, with a tempered glass protector. For one-colour LEDs, available in white, blue, green and red. There are also models for RGB LEDs, one that is controlled by a pushbutton and another controlled by RGB remote control.
|
|
|
The Fusion luminaire is particularly suited to urban areas and buildings, roads, public areas and squares. The precision of its design combined with the modularity of the optical systems represent a new, efficient and discrete approach to a lighting device designed for built-up areas.
|
|
3424: Street lamp consisting of a lighting device and a wall mounting attachment. Structure in aluminium which has been polyester-coated after sandblasting and phosphochromatising. Transparent protection glass. The appliance can be inclined at an angle of 10º or 30º to the road surface, and observes European standards
governing light pollution. Available in special version with bulbs Philips Cosmopolis.
3642: Wall support cm 18x14
|
|
|
The Wall Director is a refreshing and innovative approach to lighting ground surfaces, canopies, ceilings, and architectural features from a wall mounted luminaire.Every aspect of its form expresses the functional qualities engineered into the design. Yet, its flowing lines extend from the wall like a sconce, while simple geometry complements the architectural surface. Combined with performance optics, total cutoff, adjustability and invertible mounting, the Wall Director embodies the ultimate architectural wall luminaire.
|
|
|
Today's metal halide and high pressure sodium HID lamps have significantly improved since their introduction providing higher lumen maintenance, better efficiency, longer service life, and faster warm-up and restrike times compared to earlier systems. In addition, highly efficient triple tube compact fluorescent models are also available. Wall Commander utilizes these new powerful sources to distribute light efficiently and only where intended.
|
|
|
Prisma y Cubo is the result of a simplification and update exercise by the designer José Fernández Oyarzábal.
|
|
|
Open face design with internal lens prisms provides maximum visual impact with an additional subtle lens effect. Internal prisms and etching maintain a smooth exterior surface for ease of cleaning.
|
|
Design: Torben Rix, Leif Jensen och Ole Bruhn Grönnegade is a hardy, simple wall fixture with a classic design that fits well into traditional and contemporary environments. Suitable locations include facades at entryways, passages, courtyards, office buildings and schools. The fixture comes in three sizes for clear standard light bulbs, compact fluorescent tubes, mercury and high-pressure sodium lamps.
The standard finish of Grönnegade is galvanized steel, but it can also be lacquered in any color on the RAL scale. Grönnegade uses the same design language as Klampen, Pullerten, and Parklyktan.
|
|
Design: Niels Enevold
Buen vägg is a sturdy fixture with an austere design that makes it suitable for both traditional and contemporary environments. The horizontal band gives a pleasant light upward and downward with excellent glare reduction when the fixture is at eye level. The bowl of clear polycarbonate.
Buen is ideal on facades, supporting walls, in pedestrian tunnels, entryways, corridors and stairwells. It lights the quays in Göteborg. The fixture is available for clear standard light bulbs or compact fluorescent tubes, in either conventional or high-frequency operation. Buen is also available with a semi-shaded or opaque dome as an alternative. A stand is also available for the fixture. The standard finish is galvanized steel, but it can also be lacquered.
|
|
available colour: ALU GREY 216 04 11 A
fixation: WALL
light: DIRECT
lamptype :
lamp : 4 x QR-LP111 - G53 - 50 W (max)
voltage : 230-240V / 50-60Hz
control gear : TE
class: II
protection class: IP64
norm: CE
distance: 1,0 m
netto weight: 5.3 kg
extra info :
INDOOR MAX.35W LAMPS
|
|
Dimensions:
FCC914 - 9"W x 14"H
Heavy gauge spun aluminum cylinder,precision spun aluminum reflector with clear Alzak® finish, UL listed electrical components. Can be wall, FCC914W, pendant, FCC914P, or ceiling, FCC914, mounted.
|
|
Dimensions: - 9"W x 20"H
Marine grade corrosion resistant heavy wall die cast aluminum, with baffle, clear tempered glass, UL listed electrical components.
|
|
Dimensions: - 8-3/4"Dia. x 13-1/2"H X 13"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, UL listed electrical components.
Lamps: PL: 13Q-32T, INC: 100W , HID: 50-150MH, 35-100HPS, LED: 12-1 watt diodes (12W total), 12-3 watt diodes(36W total)
|
|
Dimensions:
18" or 14"W x 18" or 14"H x 5"D
Corrosion resistant heavy gauge cold rolled steel housing, fully gasketed, heat resistant clear tempered glass, UL listed electrical components.
Lamps: PL: 26PL-42T, HID: 50-200MH, 35-150HPS, INC: 100-200W
|
|
Dimensions:
15"W x 13-3/4"H x 15"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, heat resistant tempered clear glass, UL listed electrical components.
|
|
Dimensions:
18-1/2 W x 7.25 H
Shadow-free ADA half round wall sconce for wet locations.
Heavy gauge aluminum back housing seams are welded and polished, fitted with heavy gauge aluminum bar stock guard. Tamper proof stainless steel fasteners.
|
|
Dimensions:
5-7/8"W x 6-1/4"H x 7-1/4"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, sandblasted glass, UL listed electrical components.
Lamps: HID: 39-100MH T6 INC: 75-150WQ T4
|
|
Dimensions:
5-7/8"Dia. x 10-7/8"H
Lamps: PL: 13Q-26T
INC: 90 Par 38
HID:20MH T4.5
|
|
|
|
