|
|
|
This wall lamp keeps the design of its predecessor but with some reduced measurements that makes them ideal for exterior and interior low-level use. Available in direct or indirect light models, with symmetric, asymmetric and parallel reflectors. The energy threshold is from 70 to 150W for metal halide lamps, from 300W for lineal Halogen and 2x32W for compact fluorescent lamps. Manufactured in injected aluminium with grey polyester paint and with a protection classification of IP-65.
|
|
|
A range of ceiling/wall outdoor luminaries for direct and diffused light. Degree of protection: IP65. Housing and body in extruded aluminium with details in die-cast aluminium or mixed plastic materials. The light source is hidden behind a single reflector, which is rotated by a universal joint to allow for different light solutions. Non-dimmable electronic controls are self-contained within a remote extruded aluminium housing.
|
|
|
Wall luminaire for residential and commercial outdoor applications with IP65 degree of protection. Body and frame in powder coated die cast aluminium. Perimeter silicon gasket. Asymmetric anodised aluminium reflector. Finished white, anthracite or grey. Non-dimmable conventional and electronic gear. Single ended halogen, discharge and incandescent lamp options round off the range. Dew with asymmetric light distribution, is offered with a transparent faceted glass and eye-lid to control the vertical light output. The product conforms to the European Norms preventing light pollution.
|
|
FARO
Wall-mounted luminaire FARO, for 1 x compact lamp 18W with lampholder 2G10, in aluminium, light silver, opal polycarbonate diffusor, protection class I, protection degree IP54, with electronic control gear, B = 160mm, H = 288mm, A = 98mm
|
|
|
The Fusion luminaire is particularly suited to urban areas and buildings, roads, public areas and squares. The precision of its design combined with the modularity of the optical systems represent a new, efficient and discrete approach to a lighting device designed for built-up areas. The technical
|
|
3424: Street lamp consisting of a lighting device and a wall mounting attachment. Structure in aluminium which has been polyester-coated after sandblasting and phosphochromatising. Transparent protection glass. The appliance can be inclined at an angle of 10º or 30º to the road surface, and observes European standards
governing light pollution. Available in special version with bulbs Philips Cosmopolis.
3642: Wall support cm 18x14
|
|
Recessed wall with asymmetrical distribution
Designed for low mounting heights for interior and exterior locations featuring high output controlled distribution without glare.
Recessed luminaires with die-cast aluminum faceplate with eyelid. Clear tempered glass diffuser. Full asymmetrical reflector.
U.L. listed, suitable for wet locations.
Protection class: IP 65
Finish: Standard BEGA colors.
|
|
|
The Wall Director is a refreshing and innovative approach to lighting ground surfaces, canopies, ceilings, and architectural features from a wall mounted luminaire.Every aspect of its form expresses the functional qualities engineered into the design. Yet, its flowing lines extend from the wall like a sconce, while simple geometry complements the architectural surface. Combined with performance optics, total cutoff, adjustability and invertible mounting, the Wall Director embodies the ultimate architectural wall luminaire.
|
|
|
Today's metal halide and high pressure sodium HID lamps have significantly improved since their introduction providing higher lumen maintenance, better efficiency, longer service life, and faster warm-up and restrike times compared to earlier systems. In addition, highly efficient triple tube compact fluorescent models are also available. Wall Commander utilizes these new powerful sources to distribute light efficiently and only where intended.
|
|
|
The VPR Optic - Vertical Parking Roadway - have a beam with ample side emission and asymmetrical distribution towards the roadway. The tilted position of the lamp holder and flow recovering device in a central position guarantee high levels of efficiency and maximum uniformity on a horizontal and vertical plane. This is the ideal solution for street lighting in various dimensions where it is necessary to maintain elevated distances between the poles to guarantee high levels of brightness and uniformity.
|
|
available colour: ALU GREY 216 04 11 A
fixation: WALL
light: DIRECT
lamptype :
lamp : 4 x QR-LP111 - G53 - 50 W (max)
voltage : 230-240V / 50-60Hz
control gear : TE
class: II
protection class: IP64
norm: CE
distance: 1,0 m
netto weight: 5.3 kg
extra info :
INDOOR MAX.35W LAMPS
|
|
Dimensions: - 8-3/4"Dia. x 13-1/2"H X 13"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, UL listed electrical components.
Lamps: PL: 13Q-32T, INC: 100W , HID: 50-150MH, 35-100HPS, LED: 12-1 watt diodes (12W total), 12-3 watt diodes(36W total)
|
|
Dimensions:
15"W x 13-3/4"H x 15"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, heat resistant tempered clear glass, UL listed electrical components.
|
|
FCW5520
Dimensions:
FCW5520-12 - 4-7/8"Dia. x 13"L x 8-11/16"H
FCW5520-24 - 4-7/8"Dia. x 25"L x 8-11/16"H
FCW5520-48 - 4-7/8"Dia. x 49"L x 8-11/16"H
FCW5520-96 - 4-7/8"Dia. x 97"L x 8-11/16"H
One piece extruded aluminum housing with die-cast aluminum ends, fully gasketed,clear impact resistant polycarbonate lens, UL listed electrical components.
Lamps:
FCW5520-12 - PL: 26Q
FCW5520-24 - PL: 40-55BX, 17W T8
FCW5520-48 - PL: 28W T5,32W T8,44 T8 HO, 54 T5 HO
FCW5520-96 - PL: 2/32-T8, 110W T8 HO,
LED: 8-1 watt diodes/per foot, 8-3 watt diodes/per foot
|
|
Dimensions:
18" or 14"W x 18" or 14"H x 5"D
Corrosion resistant heavy gauge cold rolled steel housing, fully gasketed, heat resistant clear tempered glass, UL listed electrical components.
Lamps: PL: 26PL-42T, HID: 50-200MH, 35-150HPS, INC: 100-200W
|
|
Dimensions:
5 7/8" W 18 1/2" H
6" Diameter die cast aluminum up/down light cylinder
Marine grade corrosion resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate and extruded aluminum body.
|
|
Dimensions:
7 1/4" W 20" H
Large diameter die cast aluminum cylinder, up/down wall mount w/2 lamps.
Marine grade common resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate and extruded aluminum body. Back box included for HID unit, die cast.
|
|
Dimensions:
5-7/8"Dia. x 10-7/8"H
Lamps: PL: 13Q-26T
INC: 90 Par 38
HID:20MH T4.5
|
|
Dimensions:
18-1/2 W x 7.25 H
Shadow-free ADA half round wall sconce for wet locations.
Heavy gauge aluminum back housing seams are welded and polished, fitted with heavy gauge aluminum bar stock guard. Tamper proof stainless steel fasteners.
|
|
Dimensions:
5-7/8"W x 6-1/4"H x 7-1/4"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, sandblasted glass, UL listed electrical components.
Lamps: HID: 39-100MH T6 INC: 75-150WQ T4
|
|
Dimensions:
FCC914 - 9"W x 14"H
Heavy gauge spun aluminum cylinder,precision spun aluminum reflector with clear Alzak® finish, UL listed electrical components. Can be wall, FCC914W, pendant, FCC914P, or ceiling, FCC914, mounted.
|
|
Dimensions: - 9"W x 20"H
Marine grade corrosion resistant heavy wall die cast aluminum, with baffle, clear tempered glass, UL listed electrical components.
|
|
Dimensions:
10-1/2"W x 8-1/2"H x 9-1/4"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, heat resistant tempered clear glass, UL listed electrical components.
|
|
Dimensions:
7-7/8"Dia. x 13"H
Lamps: PL: 26T-42T
INC: 90 or 150W Par 38
HID:70MH G12
Large diameter die cast aluminum down light surface mount cylinder.
Marine grade corrosion resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate and extruded aluminum body.
|
|
cubo 30
IP55 light fixture for interior and exterior applications made of polished or satin stainless steel 316L with transparent or frosted glass. It can take fluorescent or incandescent lamps. Wall or ceiling light fixture, it can also be utilised as recessed fixture, installed with a special flush-finish wallbox. With the bandiera version, with adjustable bracket,the fitting can be directed as desired. With the fluorescent kit, the fluorescent + emergency kit and the special pictograms, cubo 30 can also fulfil the signalling and emergency function. In an environment and in weather condition with an high percentage of salinity the use of polished stainless steel inox 316 L is recommended.
|
|
Catalog #:IVT506MH
Description:Wall Mount T6 MH Down
Lamp:IVT506MH - 39/70 T6 Ceramic Metal Halide
Ballast:120 HPF Electronic
Listings:NRTL Wet Location Listed
|
|
|
Open face design with internal lens prisms provides maximum visual impact with an additional subtle lens effect. Internal prisms and etching maintain a smooth exterior surface for ease of cleaning.
|
|
|
edway Wall luminaire is designed for wall applications and is recommended for perimeter and security applications.The product has a central rectangular shape structure and variable length according to the quantity of light modules used.The modular system allows for configuration to obtain the desired luminous flux.
|
|
LED Streetlight "Hawk Eye® II" AT757-E
While improving the new "Hawk Eye®", we focused on its functionality and beautiful design as well as on creating a compact street light.
|
|
|
|
