|
|
|
Light fittings designed for clean spaces have an elaborate construction and their design meets the highest parameters including reduction of dazzlement. Reduced brightness L<200 cd/ m2 is reached at an emission angle above 60°. These light fittings are designed for M600 panel false ceilings with visible holding tracks. They are equipped with low-loss ballasts by default, but can be also equipped with electronic ballasts or emergency power supplies (T5 light fittings are equipped with electronic ballasts by default). This type of light fittings is designed especially for germ-free spaces and places with high safety requirements such as farmaceutical companies, hospitals, producers of electronic components etc.
|
|
A range of sealed, IP65 rated, recessed fluorescent luminaires
IP65 from below, IP20 from above
Aluminium frame with welded corners for smooth and easy to clean surface
Diffuser frame secured by quarter-turn fasteners
Prismatic PET/G diffuser for high light output combined with 850 degree C resistance and TP(a) rating (UK Building Regs)
High frequency control gear
Suitable for most exposed tee ceiling systems
Ideal for medical and pharmaceutical applications, food processing, storage warehouses and industrial clean rooms
Emergency option available
Suitable for use in cleanroom classifications to EN ISO 14644-1 (Classes 5 to 9)
|
|
A high specification, high performance discharge floodlight ideal for sports field and stadium lighting, both indoor and outdoor.
Choice of lamps giving flexibility in lumen package, Ra index and colour temperature
Computer optimised optical systems - circular reflector giving a symmetric distribution for long-throw applications (MUNR)
Available in intensive, and also optional 2 x 8° and 2 x 10° distribution. Spun circular reflector with baffle, and three-position lampholder for variable distribution.
Low glare, spill and upward light preventing light pollution
Easy installation and maintenance with rear access and automatic power interruption
IP65 dust tight and waterproof
HR version suitable for sports field, stadium lighting and any applications where prolonged lack of lighting is not permitted
Scx = 0.25m²
Variable lampholder position enables choice of distribution
|
|
PURELINE
Beneficial linear lighting and medical supply unit for excellent examination results: homely, efficient and easy to clean.
|
|
Wall-fixed single-bed luminaire for bedroom lighting. Room light (indirect): 2 x 39 W, T16 - Reading light (direct): 1 x 24 W, T16 - Orientation light (indirect): 5/7 W, TC-SEL, with electronic ballasts. Housing made of extruded aluminium section with form-fit head sections made of die-cast aluminium. Powder-coated RAL 9006 finish. Indirect light component guided by prismatic diffuser. Direct light component guided by acrylic glass rod and micro-vane louvre. Reflectors made of highly specular aluminium MIRO material.
Dimensions: 1150 x 188 x 100 mm
Weight: 6.8 kg.
|
|
|
|
|
|
PYROS- Explosion proof light fixture made of polycarbonate cover and aluminium ends. Great mechanic strenght. Electronic ballast and lamp holders mounted over removable reflector which make maintenance work easier.
It has two wire entries(M25 screw type) to offer the posssibility of continuous line installation.
Light fixture body: Polycarbonate tube of 3 mm thickness with reflector lacquered steel painted white. End caps of aluminium 2030 (polyester paint RAL 7047).
Market ATEX 94/9/CE: II 2 GD Ex d IIC T6 Ex tD A21 IP66 T85ºC.
Equipment: Electronic or dimmable.
Working temperature:From -25ºC to 55ªC. Wiring entry: M25 screw type (2 entries).
Accesories: 2 zinc covered clamps, with rubber protection and 2 eyebolt holders.
The clamps can move freely throughtout any point within th polycarbonate tube, giving it added flexibility for an easier installation.
The PYROS explosion proof fitting has an an opening of easy installation. The opening system consists of a closing top that fits in another end cap sealed to the polycarbonate tube. The affixing system is done with 2 screws. Besides, a guiding stick is included to assure the end cap is correctly placed and cpuldn´t be ioncorrectly closed. To make maintenance work easier, a steel holding chain of 200mm. is included between the closing top and the end cap.
|
|
|
|
|
|
Incased fluorecent light ficture formed by a polycarbonate tube of 3 mm thickness, which gives it great strenght. Anodized aluminium end caps.
Glossy reflector of squared section, places 2 fluorescent lamps in each face, offering in this way uniform lighting the 360º around the fixture. Mirrored aluminium reflector to obtain higher efficency. Matte polycarbonate diffuser. it is formed by a top and bottom air supplies, aside from a fan for refigerator purposes. A tripod is included (optional) to elevate the light fixture and extend the lighting area. It has an axis at the bottom of the light fixture for the purpose of tripod affixing.
The power source comes through a cable guide 83x1,5mm2) of 4 metres in lenght, situated at the bottom with Schuko to ease its connection.
Light fitting: Polycarbonate tube 3 mm thickness
Reflector: Minorred aluminium
Diffuser: Matte polycarbonate 3 mm thickness
End caps: Anodized aluminium
Lamp type: 8 piece lamp 80W PLL (included)
Maximum power: 735W
Electronic ballast: 4 piece 2X80W Philips, serie HF-P
Working temperature: from -5ºC to +25ºC
|
|
The TR3 is a high performance designer weather-proof luminaire with IP-67 waterproof.
1mm thick polycarbonate and A.B.S. terminals, ceilig clamps included, making installation easier.
This is an excellent designer waterproof light fitting.
This light fixture has a IP-67 protection grade, which offers total protection against dust and water seepage in prejudicial quantities in the interior of the cavity submerged in water, which makes it ideal for its use in refrigerator rooms, greenhouses, pools, health clubs and bridges.
Light fitting: Polycarbonate 1 mm
End caps: A.B.S.
Working temperature: From +5ºC to +25ºC
Glow wire test: 850ºC
Accesories: 2 sejection A.B.S. clamps and connector included
New TR3 model in matte versions for decorative and indoor uses.
There is also a Joint component for continuous lines, stainless steel clamp and it is availbale dor Class II.
*Polycarbonate light fittings don´t allow hydrocarbons.
|
|
In the same line as the TR3, The TR4 can be used for a wide range of purposes, as it is smaller but retains an excellent IP-67 waterproof.
For situations in which space is limited, it is possible to produce asymmetrical models, thus reducing the lenght of the light fitting.
This light fixture has IP-67 protection degree, that offers a shield against dust and water penetration in prejudicial quantities inside the incapsulate submerged in water, which makes it ideal for its utilisation in nurseries, fountains, pools, greenhouses, spas, etc.
Light fiting: Polycarbonate 1 mm.
End caps: A.B.S.
Reflector: Aluminium
Clamps: A.B.S.
Working temperature: From -15ºX to +50ºC Accesories: 2 A.B.S. sujection clamps and connector included
Disposal in grey version.
|
|
TR2- Its 5 mm. acrylic body gives it extraordinary protection against impacts, giving it an IK10 protection rating. The lasing is perfectly suited to dusty or wet conditions. Thanks to its excellent IP protection rating of 68 and allows it to be submerged to up to 2 meters. This light fixture unites waterproofing, strenght and design. It´s the perfect solution to illuminate spaces that require a high quality fixture, that is able to stand the worst conditions, which makes it ideal for its use in: industrial, cooking hoods, greenhouses, fountains, pools, paint booths, direct tool lighting (resists direct hits,) outdoor lighting.
Available in high temperature version.
Light fitting: Acrylic 5 mm
End caps: Nickel-plated Zamak
Reflector: Glossy aluminium
Working temperature: From +5ºC to +25ºC
Accesories: 2 galvanised clamps
|
|
Homogeneous flicker-free light over 360°
Airstar balloons offer a perfectly uniform light over 360° with only one unit, which would not be possible with traditional lighting systems.
Also, the texture creates a light source with few shadows, which is especially useful for shooting as it enables the landscape and sets to be perfectly seen.
|
|
Solid and efficient, it is a quick and easy to use working tool
Elliptic or tubular balloons.
Self-inflating with air thanks to a built-in fan.
Several sizes available.
Halogen or HMI light.
You can find it in low voltage, portable in big power for huge areas versions.
Balloon designed to be solid.
Withstand winds up to 100km/h- 65mph.
Light and easy to transport.
Easy to set and to use.
Mounted on a stand or on a vehicle.
Ideal for the operations by night: outdoors or in dark areas, but also for activities in confined spaces and even below the ground.
To light any industrial and working sites, any rescue and security operation, but also to light large event s like sporting events or festivals, or to light parking lots, entrances, pathways etc...
|
|
Personalized customization
Depending on what you want, depending on the themes, the place and the area, you can put your logo, message or pictures on the balloons: this can be done without distortion thanks to the technical know how of Airstar.
You will have the choice between vinyl, digital printing, painting, embroidery, LEDs or colored cover.
|
|
|
The lamp selection is mounted of easy and simple form. His(her,your) design goes according to the decoration of the habiatción. With this form it is provided to the environment of unit
|
|
|
Cheer up your child’s work and play space with fun retro lamps in kid-friendly colors. The gooseneck design lets you angle the light right where you want it, and a handy clip lets you attach it to a bed, desk, hutch, or wherever it's most convenient. A great desk or bedside lamp, made of sturdy iron. Available colors listed below. 10 x 3 x 11" h.
|
|
|
Placing a lamp near your child%u2019s bed encourages reading before bedtime. The colors of this classic tailored shade coordinate perfectly with our bedding collections. The cast-metal construction of our Cortland Lamp Base extends and locks into place with the turn of a key. Hi-lo switch. UL-listed. Available colors listed below.
|
|
Clever kids aren't scared of spiders - but ghosts are!
Ceiling lamp adjustable in height.
Measurements: approx. Ø 25 cm, H 18 cm.
Socket E 27, max. 60 W, for 230 V.
|
|
Material: plastic lampshade, wooden foot.
Dimensions: height 32 cm, Ø 16 cm.
Cable (190 cm) with press switch. E 14, max. 40 W, 230 V.
|
|
The Remake Light classic is a modular lighting system
to compose and vary shapes of light.
Thanks to its unique rotating plug system, the modules connect wirelessly to one another
vertically or horizontally. .
Dimensions of one module: 24x17x17cm
The module is made of injected coloured SAN with a glossy finish.
|
|
They are bricks of light, to build simple or complex forms, monochrome or multicolor, in light. Two models are available : Remake Light classic to stand and Remake Light magnet, the mural version.
Thanks to its unique rotating plug system, the modules connect wirelessly to one another vertically or horizontally.
|
|
|
Good lighting is a must for kids working on craft projects or homework. Our swing-arm lamp is made of sturdy metal and lets them adjust the light to shine right where they need it. Dress it up with our pretty ruffled linen cotton shade. Available in pink or cream. Catalog/Internet Exclusive.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
