|
|
EFFICIENT AND AESTHETICALLY PLEASING VENTILATION SYSTEM
Innovative technology to enhance ventilation via aluminium doors and windows
The emphasis on insulation often occurs at the cost of good ventilation. In turn, this heightens the risk of condensation. To ensure sufficient supply of fresh air without losing the benefits of good insulation, Reynaers has developed a controllable ventilation system: Ventalis.
A UNIQUE SYSTEM
Self-regulating airflow
Modular system
For more information visit our website
www.reynaers.com
|
|
For floor and wall installation with perimeter front border and horizontal, fixed profiled blades.
The air discharge can either be at right angles to the grille or at an angle of 15. The grille core is held in place with spring clips and can be removed.
In builders work, the installation can be made using builders cleats.
|
|
The type FSL-U-ZAB decentralised under floor units are combined supply and extract air units for ventilation, heating and cooling of individual rooms or complete buildings. Before the supply air enters the room it is filtered as well as heated or cooled to provide the required supply air temperature. The room return air passes through a heat recovery unit before being discharged to the outside. The heat recovery unit is used to condition the supply air thus minimising the basic energy requirements of the system .
rectangular
17 33 l/s
60 120 m/h
35 71 cfm
Unit height: 203 mm
Grille width: 500 mm
|
|
Wall Louvre 34 mm surface mounted.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 34mm.
- Blade height: 39mm.
- Total depth: 36mm.
- Visual free area : 68%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness.
|
|
Glazed-in Louvre 34 mm for 24 mm glazing.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 34mm.
- Blade height: 39mm.
- Glazing thickness: 24mm.
- Rebate size: 18mm.
- Visual free area : 68%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness
|
|
Glazed-in Louvre 20 mm for 20 mm glazing.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 20mm.
- Blade height: 20mm.
- Glazing thickness: 20mm.
- Rebate size: 18mm.
- Visual free area : 68%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness.
|
|
Glazed-in Louvre 50 mm for 24 mm glazing.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 50mm.
- Blade height: 67mm.
- Glazing thickness: 24mm.
- Rebate size: 22mm.
- Visual free area : 68%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness.
|
|
Glazed-in Louvre 34 mm V-blade for 20, 24 or 28 mm glazing.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 34mm.
- Blade height: 38,5mm.
- Glazing thickness: 20, 24 or 28 mm.
- Rebate size: 22 mm.
- Visual free area : 60%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 – 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness.
|
|
Wall Louvre 34 mm V-blade flanged.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 34mm.
- Blade height: 38,5mm.
- Depth to fit: 58mm.
- Total depth: 33,8mm.
- Visual free area : 60%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 %u2013 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness.
|
|
Glazed-in Louvre 20 mm for 28 mm glazing.
Technical details
- Aluminium blade profiles are clipped into aluminium blade support clips.
- Blade pitch: 20mm.
- Blade height: 20mm.
- Glazing thickness: 28mm.
- Rebate size: 18mm.
- Visual free area : 68%.
Finishing
Natural anodised: 15 to 22 micron.
Other shades possible.
Powder coated in any RAL finish: 60 %u2013 80 micron.
Manufacture
- Made to measure.
- Bar length profile for self assembly.
- A reinforcement profile carrying extra blade supports is fitted when the width of the louvre is > 700mm.
- A stainless steel mesh (304) is fitted to the back
Options
- Aluminium water drainage profile can be fitted at the bottom of the louvre. This is to ensure better water thightness.
|
|
A-250
TRANSFER GRILLE WITH FIXED VANES WITH 45 DEFLECTION
Transfer grille with fixed horizontal blades with 45 deflection, distance blades is 20mm.
Margin and vanes in extruded aluminium, natural tone anodised.
|
|
AG800
GYMNASIUM FLOOR GRILLE
Aluminium floor grille in a solid contruction with trimmed edges and removable core. Purpose-made for rooms such as sports centres and industrial halls.
The grille is especially made for integrated floor mounting.
Standard finish satin anodised.
|
|
Rectangular with adjustable louvres.
- To cover rectangular intake or extract openings especially for rectangular ducting.
- Centrally adjustable louvres allow adjustment of air flow volume.
- Corrosion resistant design made from galvanised steel in a white epoxy finish.
- Includes mounting frame allowing universal installation. When installing in thin walled
ducts fixing with 4 screws.
|
|
Wall Louvre standard series
|
|
Product main features
- Horizontal air supply, also suitable for exhaust
- Fixed vanes, stable throw pattern with no deflection
- Aluminium design with elegant appearance
- Detachable grille allows cleaning of the grille and ductwork
- Continuous grilles available with modular design
|
|
|
The Zehnder floor air outlet can be height-adjusted and is suitable for floor pavements up to x cm. The integrated grid insert ensures step resistance. An attractive grid provides an optically appealing finish. The Zehnder floor outlet can be opened at any time for cleaning purposes.
|
|
Ventilator
Material: 304 Stainless Steel
Finish: Satin
|
|
Metallic fabrics, you enmesh flexible or rigid with multitude of forms and designs that allow to cover great outer surfaces, to create inner virtual spaces or simply to generate illusions visual combining light and color.
The stainless steel fabrics are very versatile as much in their applications as in their characteristics, with a great variety of models that can make in the measures that the project demands and use the more appropriate systems of anchorage for each application.
Outer closings of great spaces that combine esthetic and functionality in a same material. Applications for interiors, panelado of walls, division of spaces or subtle light filters.
|
|
|
We propose to you a range of ventilation grills to be chosen according to your interior: completions stainless, aluminum, wood, mural or to embed in the ground.
|
|
Grills mural for blowing and the recovery for all the applications of ventilation and air conditioning.
The wings vertical, horizontal, are adjustable individually and make it possible to direct the air blast according to the architectural constraints. Several modes of fixing available.
|
|
| ... products without information |
| |
| ... products without information |
| |
|
|
