|
|
|
|
|
|
THERMBORD - baseboard heating - is a perimeter irradiation heating system. The experiments conducted have proven that this heating system distributes heat perfectly evenly throughout the room, in a manner that is easily understood.
Heat distribution around the floor and irradiation from the walls offer a healthy, comfortable indoor climate: no cold feet, same temperature from head to toe, no cold, damp corners, no respiratory irritation (scratchy throat) - in short, none of the inconveniences encountered with convection heating. It's a brand new sensation of warmth.
The low percentage of convection (ascending heat) forms a veil of warmth in front of cold external walls that absorbs the incoming cold; it cools as it rises, thus avoiding the costly waste of a cushion of heat under the ceiling (energy savings).
Compared to traditional systems, hemo THERMBORD allows you to reduce the room temperature by approximately 3 degrees while maintaining the same comfort level, for energy savings of up to 40%.
|
|
All our fireplaces are made using skilled craftsmanship and the most advanced technology, by a company that has made design, function, attention to detail and the safety its essential laws.
Study of forms, combustion and materials tests are the basis of every model from ANTRAX. The aim is to always provide an innovative and leading edge product.
The elegance of the lines is the result of rigorous design and study of proportion, essential in defining the particular character of our models, CUBO, JOKER and DAMASAN. These three models are also characterised by their suspension away from both the floor and the wall, which contributes to their developing a large heat output.
|
|
|
|
|
|
Bubble is Antrax IT's first open fireplace, designed specifically to provide the special atmosphere that can only be achieved from direct contact with fire.
With its highly original form, it appears like a metal bubble full of fire, from which its name derives.
Available in two versions, it can be either fixed to the wall or suspended from the ceiling, becoming a room-centre fireplace.
BUBBLE wall version
The wall version, as with many other Antrax IT models, is not only suspended above the floor but also 'floats' away from the wall thanks to a system of fixing that additionally acts as the flue, all of which adds up to a really special form of heating. The Bubble fireplace only needs a small amount of space and is guaranteed to bring a touch of class and originality to any interior design in which it is incorporated it can be either classical or modern according to the materials chosen, and is a focal point wherever it is used.
BUBBLE ceiling version
For the ceiling version, the fireplace is again fixed in place by a flue that supports it. It is ideally located in the centre of a room, suspended 30 centimetres above the floor.
|
|
All our fireplaces are made using skilled craftsmanship and the most advanced technology, by a company that has made design, function, attention to detail and the safety its essential laws.
Study of forms, combustion and materials tests are the basis of every model from ANTRAX. The aim is to always provide an innovative and leading edge product.
The elegance of the lines is the result of rigorous design and study of proportion, essential in defining the particular character of our models, CUBO, JOKER and DAMASAN. These three models are also characterised by their suspension away from both the floor and the wall, which contributes to their developing a large heat output.
|
|
|
|
|
|
Bubble is Antrax IT's first open fireplace, designed specifically to provide the special atmosphere that can only be achieved from direct contact with fire.
With its highly original form, it appears like a metal bubble full of fire, from which its name derives.
Available in two versions, it can be either fixed to the wall or suspended from the ceiling, becoming a room-centre fireplace.
BUBBLE wall version
The wall version, as with many other Antrax IT models, is not only suspended above the floor but also 'floats' away from the wall thanks to a system of fixing that additionally acts as the flue, all of which adds up to a really special form of heating. The Bubble fireplace only needs a small amount of space and is guaranteed to bring a touch of class and originality to any interior design in which it is incorporated it can be either classical or modern according to the materials chosen, and is a focal point wherever it is used.
BUBBLE ceiling version
For the ceiling version, the fireplace is again fixed in place by a flue that supports it. It is ideally located in the centre of a room, suspended 30 centimetres above the floor.
|
|
|
OSV Slim is a wall-mounted capacity water heater. Slim storage water heater was designed especially for limited space. Thanks to reducing the width to 36 cm only, it occupies much less space than traditional storage water heaters.
|
|
FERROLI ELECTRIC STORAGE HEATERS
HIGH QUALITY COLD-ROLLED STEEL
"BLUE SILICON" ENAMEL POWDER COATING PROCESS
CAPACITY FROM 5,5 TO 100 LITRES
|
|
Convenient for every house by its 3 different capacity ( 50 lt, 65 lt, 80 lt) option.
There are standart / lux / digital alternatives of prismatic model.
Has very high corrosion resistance due to enameling treatment with titanium addition, applied to water reservoir.
Ensures high energy saving by means of mono-bloc polyurethane isolation of 3 cm thickness.
Has long life due to its magnesium anode with high potential in compliance with DIN norms. Perfectly safe against negative electro-chemical effects that may come out at operational conditions.
Ensures operation without problem by means of its newly designed heaters working without any problem at different consumption water conditions and its electrical components having international VDE certificate.
|
|
One hot water storage heater, six operating modes. That's how flexible the new DEM C wall-mounted storage heaters from AEG really are. Whether of an open (vented) or closed (unvented) design, in single circuit, dual circuit or boiler mode - in terms both of connection and performance the DEM C series is entirely made to suit your individual circumstances. One hot water storage heater, six operating modes. That's how flexible the new DEM C wall-mounted storage heaters from AEG really are. Whether of an open (vented) or closed (unvented) design, in single circuit, dual circuit or boiler mode - in terms both of connection and performance the DEM C series is entirely made to suit your individual circumstances.
|
|
The GBK water heater is equipped with an additional heat exchanger and is intended exclusively for vertical wall mounting.
It is eminently suitable for use in family homes, where during the winter season, it may be operated in conjunction with the central heating system, while in summertime, this heater can be connected to a solar collector system. During central or solar heating, the water can be additionally heated by an electrical heating element, while during non-activity, the water can be heated by an electrical heating element.
An air-heating element is inserted into a protective metallic tube within the heating flange. It allows for the maximum degree of protection of the enamelled tank surface in combination with a magnesium anode, reduces sedimentation and facilitates maintenance. The GBK heater is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
|
|
Gorenje has upgraded its heaters with electronic regulation for more demanding customers. Electronic regulation simplifies handling and provides a clear display of the heating element’s status and the desired temperature in the tank. These heaters are thus ranked among the most economical and user friendly devices on the European market.
The OGB EL heater is characterised by the superb technical design of its heating elements. An air heating element is inserted into a protective metallic tube within the heating flange. The tank as well as the protective tube is enamelled against corrosion. It allows for the maximum degree of protection of the enamelled surface by a magnesium anode, reduces sedimentation and facilitates maintenance. The OGB EL heater is equipped with an accurate, intelligible and easy-to-use electronic regulator, which assures optimal energy consumption.
|
|
The TG heater has been developed as a result of demand from a number of markets for a low-priced high-quality water heater. It is intended for the supply of a single outlet or for the central supply of hot water to numerous outlets from a single heater.
Due to its smaller external diameter, it is suitable for apartments as well as other smaller premises. It is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
The new design of the heating flange with a larger opening facilitates cleaning and maintenance.
|
|
These electric storage water heaters fit almost anywhere -- under a sink or in a cabinet. If you only need hot water at one location, a conventional water heating installation can be quite costly. You need space for a bulky water heater and its required plumbing -- including two long pipe runs for hot and cold water. And you waste money every time you have to run the water until it reaches the desired temperature.
An InSinkErator® compact water heater is a much better solution. It efficiently heats water at the point-of-use, so there's no wait and no waste. And it can be installed anywhere you have a standard electrical outlet.
|
|
TP-200 T (200 liters)
Electric cord
Round external format
Vertical installation
Resistance immersion heater out of copper
Anode Magnesium
Polyurethane insulation without CFC
Internal thermostat
Thermostat of safety
TP-200 T all currents: 230V transformable single-phase current in 230V three-phase or
400V three-phase.
Options: Tripod/Kit of legs of transfer
|
|
|
The Maradja electric radiator combines a cast iron heating element with new technologies (infrared remote control, heating diffuser film) to produce the effect of old-style heating while responding to the modern demands for comfort and design.
|
|
Professional reference of the market, the range of electronic hot-water heater VM ACI Visio integrates the best of Atlantic:
Electronic intelligence (dry anti-heating, simplified electric connection, electronic thermostat of series, innovation Tri Kit...)
System patented ACI, resistance steatite and fixed price breakdown service ACI
More Visio (pilot of good performance of the ACI, differentiated esthetics, Express service Visio Spare parts reserved to the fitters...)
NF Électricité Performance CAT C: the distinctive sign of the hot-water heaters most powerful
|
|
| ... products without information |
| |
|
Attractive compact heater that provides a uniquely styled solution for heating smaller, more intimate domestic environments e.g. balconies and small terraces. The Carnival is an indoor heater which can be used outside when sited under cover. Its low power and high heat output makes it ideal for use on camping and caravanning sites.
|
|
The portable version of the TERM 2000 has been specially developed for the easy and effective heating or drying of paint and other materials. Weighing in at only 1.5 kg, it is easy to transport and can be used both horizontally and vertically. Different colours are available.
|
|
For wall application offering localised heating in wide industrial and commercial spaces such as warehouses, sports centres, parkings, churches...
Quartz halogen lamps that when connected immediately reach 2000C and deliver a heat similar to the solar radiation.
Heat emission by means of infra-red short wave radiations, of a higher efficiency than the long wave ones to heat at a large distance.
|
|
| ... products without information |
| |
|
ACV’s new wall-hung condensing boilers are designed for more efficient use of natural resources by recovering the thermal energy of combustion gas vapour. ACV condensing boilers are fitted with a stainless steel core that guarantees unparalleled corrosion resistance. Their outstanding efficiency and their quiet, reliable operation are an unbeatable combination.
|
|
|
|
|
|
The solution for affordable and convenient heat
With the Vitopend 200-W, Viessmann offers a wall mounted gas fired boiler with a particularly advantageous price/performance ratio, excellent heating and operating convenience, compact dimensions and a timeless, elegant design.
Price and performance in perfect harmony
The Vitopend 200-W is one of the most affordable in its class, not only in the purchase price, but also where running costs are concerned. After all, it can achieve a high standard efficiency of up to 85 % (Hs) / 94 % (Hi).
Economic and environmentally friendly
The premix burner of the wall mounted gas fired Vitopend 200-W boiler is particularly economical because it adapts its modulating burner operation to the actual heat demand. Automatic flue gas adaptation ensures that combustion meets the actual conditions, for example when there is a change in weather conditions. Not only is it easy on the pocket, but it is also environmentally friendly. Consequently, the Vitopend 200-W emissions are below the requirements for the "Blue Angel" certificate of environmentally excellence.
Always space efficient
The compact Vitopend 200-W fits practically anywhere, in the kitchen, the bathroom, the attic, in recesses and corners - because clearances to the side for service work are not required. The Vitopend 200-W can be quickly fitted by your heating contractor and is operational in no time, be it in a new building or replacing an old boiler.
|
|
HYDROMOTRIX Condensation 14/20 commutable
The condensation optimized up to 109% of output
The exclusive technical solutions whose HYDRO Condensation is equipped, optimize energy saving throughout the year, and guarantee stable and durable performances.
|
|
| ... products without information |
| |
|
|
