- Building & Construction >
- Facade, Curtain wall >
- Metal cladding
Metal cladding
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Baïne is a cladding siding with symetrical waves ( sinusoidal) done by bending. Baïne is usable for facade and over-roofing as vertical or horizontal installation with visible fixing. Used as wall cladding, ...
ArcelorMittal Construction
... Lenght up to 6m Metal thickness : steel 1 mm / aluminium 1,5 mm Standard width : 300 mm (other on request) Perforation on request Chaotic® is a rainscreen cladding made of coated steel sheets with ...
ArcelorMittal Construction
Mascaret® is a perforated cladding system with 4 wavy shapes. Different perforation are available. Mascaret® is specially well-adapted for sun screen and transparent facade. Its specific perforations create a transparency ...
ArcelorMittal Construction
Rolled aluminium profile (L.065AL ); rolled aluminium profile, perforated (L.065AL .02) galvanized steel (L.065GL) or stainless steel (L.065StS). Light duty strip material with a pitch of 65 mm and resistance to normal weather conditions. ...
RENSON
Heavy-duty extruded aluminium profile at 50 mm pitch with very high air flow. Applications Often to be found where the blade pitch reflects the aesthetics of the overall project design. Available as doors, shapes and circles. Materials Aluminium ...
RENSON
Heavy-duty extruded aluminium profile at 66 mm pitch with high air flow. The largest of the “small” format louvres retaining high air flow characteristics whilst providing a significant degree of weatherability. Materials Aluminium extrusion, ...
RENSON
... partial) Woven wire mesh can be combined with a variety of colors. In addition to RAL colors, there are also numerous metallic colors available. The creative possibilities are almost unlimited. Multi-colored designs ...
HAVER & BOECKER OHG
Maximum width: 4 m
Open area: 46 %
Weight: ~ 10.2 kg/m² Characteristics: Dense cable mesh with reduced transparency Also suitable for tight radii due to special flexibility
HAVER & BOECKER OHG
... with large-area light reflections Very resistant wire mesh Can be used in a variety of ways due to its resilience Suitable for facade design, as parapet infill and as robust cladding in interior areas
HAVER & BOECKER OHG
Advantages of surface design Varied surface design options based on RHEINZINK facade systems Special shaping using seams, curves, embossing or perforations Fascinating effects created using artificial or natural light Natural surface Surface ...
RHEINZINK
One of the most interesting towers in Europe. BUILDING TYPE Company headquarters LOCATION / COUNTRY Marijin Dvor, Sarajevo, Bosnia and Herzegovina MATERIAL ALUCOBOND® ARCHITECT / PLANNER Ahmet Kapidžic dia, Faruk Kapidžic dia - ADS Studio COLOUR ...
ALUCOBOND
BUILDING TYPE Corporate Identity Design LOCATION / COUNTRY n/a, Czech Republic MATERIAL ALUCOBOND® ARCHITECT / PLANNER David Zbranek, WIXPAD s.r.o. COLOUR SURFACE Metallic colours COLOUR BUTLERFINISH® Bronze Metallic CONSTRUCTION Custom ...
ALUCOBOND
BUILDING TYPE Corporate Identity Design LOCATION / COUNTRY Teverola, Italy MATERIAL ALUCOBOND® ARCHITECT / PLANNER Tecno Soluzioni S.r.l. COLOUR SURFACE Solid colours COLOUR Steel blue (350) CONSTRUCTION Tray panels suspended FABRICATOR Tecno ...
ALUCOBOND
Length: 800 mm - 6,000 mm
The Open Structure Façade system provides architects with an opportunity to design a cladding system that creates a visually crisp, clean and dynamic finish to a building’s facade. Traditionally built with linear panels, ...
Length: 100 mm - 6,000 mm
Height: 73 mm
Thickness: 0.6 mm - 1.2 mm
KYRA 2.1 is an Europerfil architectural wall metal cladding profile with hidden fixing (1.320.73). Can be installed horizontally and vertically. Nerve height 83 mm, cover width 320 mm, and thickness from ...
EUROPERFIL, SA
Length: 100 mm - 6,000 mm
Height: 89 mm
Thickness: 0.7 mm - 1.2 mm
Europerfil KEFREN 3.2 architectural metal profile (1.455.89) for external walls (horizontally or vertically). Nerve height 89 mm, useful width 455mm, and thickness from 0.70 mm to 1.20 mm. Galvanised and pre-lacquered ...
EUROPERFIL, SA
Length: 100 mm - 4,500 mm
Height: 85 mm
Thickness: 0.7 mm - 1.2 mm
Europerfil GIZA architectural metal profile (1.400.85). Nerve height 85 mm, useful width 400mm, and thickness from 0.75 mm to 1.20 mm. Galvanised and pre-lacquered steel (EN 10169) in standard Europerfil colours and coatings. ...
EUROPERFIL, SA
Length: 1,100 mm - 7,500 mm
Thickness: 0.75 mm
Among the dreams of the architect, the correct mastery of randomness is one of the supreme exercises. Playing with sobriety, composing your own rhythm with finesse, to obtain a subtle singularity, with the assurance of a result of discreet ...
ATELIERS 3S
Length: 1,100 mm - 7,500 mm
Thickness: 0.75 mm
Among the dreams of the architect, the correct mastery of randomness is one of the supreme exercises. Playing with sobriety, composing your own rhythm with finesse, to obtain a subtle singularity, with the assurance of a result of discreet ...
ATELIERS 3S
Length: 20 cm - 1,300 cm
Thickness: 0.75 mm
... exercises of wood on facades. The textures are impressively realistic, and the matt black treated rib bottoms disappear to give the perfect illusion of real wood elements. All while maintaining the speed ...
ATELIERS 3S
Length: 1,500 mm
false ceiling and wall cladding width on demand available in coils
Alubel
The JI Grégale 300 is a flat façade cladding system with hidden fixings. It can be used for both new construction and renovation. This siding is installed from bottom to top. This product requires an adjusted support ...
Joris Ide
Joris Ide
The JI Ouragan P30 profile is a ridged façade cladding concept with visible fi xing designed for both new build and renovation. Its very special geometric shape allows for original cladding to play on ...
Joris Ide
Can be safely installed: diagonally, vertically or horizontally21 colours to choose from – available upon request: powder-coated in every RAL colour up to a length of max. 3,000 mm
PREFA Aluminiumprodukte GmbH
Length: 1,250 mm - 6,000 mm
Height: 990 mm
Thickness: 0.6 mm - 1.5 mm
... designed by TAS. The profile Mallorca stands out for its peaky finish and its different modulation options. Conceived for cladding of façades, it can be installed either vertically or horizontally and it can be manufactured ...
TRANSFORMADOS Y ACCESORIOS DEL SUR, S.L
Length: 1,250 mm - 6,000 mm
Height: 450, 680, 880 mm
Thickness: 0.6 mm - 1.5 mm
... The profile Dragonera is formed by three different parts or "scales" which are installed overlapping. Conceived for cladding of façades, it can be installed either vertically or horizontally and it requires an ...
TRANSFORMADOS Y ACCESORIOS DEL SUR, S.L
Length: 1,250 mm - 6,000 mm
Height: 958 mm
Thickness: 0.6 mm - 1.5 mm
... asymmetrical geometry. Each profile contains more than 20 folds with a wide range of angles that make it a unique solution for cladding facades on the market. The Cabrera profile can be installed both horizontally ...
TRANSFORMADOS Y ACCESORIOS DEL SUR, S.L
Length: 225 mm - 250 mm
Height: 4,000 cm - 4,000 cm
Thickness: 1 mm - 1 mm
With modern perforation technology, perforated elZinc® façades can be taken to the next level by introducing patterns over the panels. In this way, all the advantages of elZinc standard perforated panels are combined with designs that ...
ASTURIANA DE LAMINADOS
Length: 1,000 mm - 1,250 mm
Height: 0 mm - 6,000 mm
By using special software that takes images and converts them into patterns of perforations of different densities and sizes the architect can ‘draw’ over the entire facade, converting it into something completely unique. Possibilities ...
ASTURIANA DE LAMINADOS
Length: 1,000 mm
Height: 2,000 mm
Thickness: 0.65, 0.7, 0.8 mm
... several years of exposure to the open air, whist preserving its initial properties. elZinc Slate® is used in roofing and cladding, where it harmonizes perfectly with other traditionnal building materials, or indoors, ...
ASTURIANA DE LAMINADOS
Cladding profiles provide the basis for an elegant façade on which no fasteners can be seen. MONTALINE® cladding profiles are also available with double-sided bended ends. This gives the façade the character ...
MONTANA BAUSYSTEME
SMARTIA M7000 Barcode Cladding is the ideal series for modern wall-cladding constructions, applied both at exterior and interior and upgrading overall aesthetics and energy levels. Undoubtedly, this is ...
Bravo W is the optimal solution for large and flat façades, ensuring fast and secure installation of etalbond® cassettes.The system allows the movement of the façade material due to various thermal expansions without compromising the ...
Omega cassette system is a simple and efficient cladding system, incorporating etalbond® cassettes using the hanging technique, assuring fast and easy installation. Optimal for large and flat vertical layout.
The equipment enclosure, System 755, from MLL Hamburg, is a free-standing slat facade made of aluminium with a free ventilation cross section of 69%. The system 755 is equipped with a Z-slat of the heavy series of type 050. Fastening ...
... Applications : EcosTa shEET mETal can be added to traditional curtain wall horizontal frameworks, vertical frameworks and traditional joinery. EcosTa shEET mETal is also ...
ISOSTA international
Thickness is not a prerequisite for good insulation performance. Highly insulating and ultra-thin, clim xs facade panel is composed of insulation that is five times more efficient than rockwool, for facades with high thermal performance. ...
ISOSTA international
As a specialist in the design and manufacture of aluminum facade cladding, ISOSTA International provides a high-performance, modern answer to the requirements of contemporary architecture. Whether your building has spectacular ...
ISOSTA international
This is the cladding type, performed with aluminum composite panel that consists of two thin aluminium sheets binded to a non-aluminium core widely used for external facades of the buildings. The core is commonly low ...
The use of Reynobond, has become generalized, so that the PNB has been involved in this market so assiduously There are several works in which we are engaged, we give some examples of applications of this material by the project teams, ...
Perforated Metal Sheets a) Favorable design b) Simple installation c) High strong quality. d) Good Anti- corrosion
Perforated Metal Screen a) Favorable design b) Simple installation c) High strong quality. d) Good Anti- corrosion
Perforated metal screen wall panel a) Favorable design b) Simple installation c) High strong quality. d) Good Anti- corrosion
... comprised of 47 unique elements, using a variety of materials, from brick to glass and architectural metals. Zahner developed the geometry and cladding the structure with rain screen panels in stainless ...
A. Zahner
Thickness: 25 µm
... undemanding roof and wall applications particularly in non-aggressive environments. Pre-finished steel cladding Colorcoat® PE 25 is suitable for wall cladding systems, profiles and panels, and can ...
TATA STEEL
ARCHITECT Jean-Marie Martini MANUFACTURER Montana PRODUCT 15 tons of Reynolux® Building COLOUR Steel Violet COATING Duragloss® 5000 APPLICATION Sinusoidal sheet
Arconic Architectural Products SAS, Merxheim/Frank
Thickness: 167 mm
Deceuninck
Your suggestions for improvement:
Metal siding is an exterior wall covering made of steel, aluminum, zinc or another material. The three broad types are single-skin, double-skin and sandwich panel. Elements can be installed horizontally or vertically. ArchiExpo lists metal siding under the Facade heading. There is a large selection of forms and colors, both galvanized and pre-lacquered.
ApplicationsThese elements are more often used for commercial and industrial buildings than for dwellings. They ensure mechanical integrity, impermeability to air and water, thermal and acoustic insulation, as well as offering aesthetic qualities.
How to chooseBuilding type and architectural environment will determine the choice of metal siding. Other criteria include the project's needs and budget, as well as the required thermal insulation.
- Great variety of form and color
- Prejudice against its "industrial" look
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining