|
|
|
An immediately loadable ceiling, which permits any type of floor construction and simultaneously provides a visible quality ceiling ready for use, can be assembled in record time using the Profidecke. The high level of pre-assembly and the perfect fitting accuracy of the individual elements enable rapid laying on the building site. The short assembly time and easy of machining mean that the Profidecke element is a cost-effective, environmental alternative to conventional reinforced concrete ceilings and wooden beam ceilings.
|
|
|
K1multiplan is interesting in its conceptual design: Professionals appreciate the versatility of the product's many uses. K1multiplan becomes an important part of the structural design itself: Not only is it decorative but it can also take on load-bearing, bracing and space enclosing functions. K1multiplan satisfies individual requirements effortlessly.
|
|
|
The panel Wenus® is a new structural system, which can be employed horizontally or vertically for slabs, walls or covering. It is based on the use of raw or planed boards, which are screwed together obtaining the "W"-shape. Thereby a static height is accomplished, which confers a rigidity for free spans of 3 to 6 m.
|
|
|
Glulam is a high-quality material which is useful in a wide range of applications and possesses outstanding properties. It can be incorporated ideally in interior design and is particularly attractive.
|
|
|
The advantages of NORDLAM »ExpressElements« ceiling components are obvious. Simple and quick assembly is possible using the Rampa fittings which are included with the sections. The ceiling can be walked on as soon as it has been installed. The stability is therefore not compromised and the appearance of the underside is excellent. Depending on the application, the underneath can be left as a visible ceiling. From an environmental point of view, wooden ceiling constructions create a very pleasant climate in the room. Installations, even refits, are no problem.
|
|
|
|
|
|
Cross-laminated timber (KLH) is produced from spruce strips that are stacked crosswise on top of each other and glued to each other. The PEFC certificate guarantees that the raw material used comes from ecological, economical and socially responsible forests.
The crossways arrangement of the longitudinal and crosswise lamellas reduced the swelling and shrinkage in the board plane to an insignificant minimum - static strength and shape retention increase considerably. Compared to conventional timber construction products, cross-laminated timber offers entirely new possibilities when it comes to load transfer. Not only can loads be transferred in one direction (as is the case, for example, with supports, girders, etc.) but on all sides (referred to as "genuine plate and sheet action").
Only technically dried wood with a wood moisture of 12% (+/- 2%) is used to produce KLH solid cross-laminated timber boards. This rules out any damaging pest, fungus and insect attacks. All boards used are subject to a visual and mechanical quality sorting procedure.
The gluing takes place using solvent-free and formaldehyde-free PUR adhesive from Purbond (HB 110, HB 530) - this adhesive is tested according to DIN 68141 and other strict criteria of the MPA Baden Württemberg, Otto Graf Institute Stuttgart and is recognised for the production of internal and external supporting timber components and special construction methods in accordance with DIN 1052 and EN 301. The glue is applied automatically over the whole surface - the percentage of adhesive is 0.2 kg/m² and glue seam. A very high-quality level of adhesion is achieved as a result of the pressing power of approx. 6 kg/cm2.
The factory cutting and beaming of KLH solid cross-laminated timber boards takes place using state-of-the-art CNC technology. The basis for the cutting is formed by the cutting plans of the client. On request and with the appropriate equipment, the boards can also be cut by the relevant construction company.
|
|
|
|
|
|
Cross-laminated timber (KLH) is produced from spruce strips that are stacked crosswise on top of each other and glued to each other. The PEFC certificate guarantees that the raw material used comes from ecological, economical and socially responsible forests.
The crossways arrangement of the longitudinal and crosswise lamellas reduced the swelling and shrinkage in the board plane to an insignificant minimum - static strength and shape retention increase considerably. Compared to conventional timber construction products, cross-laminated timber offers entirely new possibilities when it comes to load transfer. Not only can loads be transferred in one direction (as is the case, for example, with supports, girders, etc.) but on all sides (referred to as "genuine plate and sheet action").
Only technically dried wood with a wood moisture of 12% (+/- 2%) is used to produce KLH solid cross-laminated timber boards. This rules out any damaging pest, fungus and insect attacks. All boards used are subject to a visual and mechanical quality sorting procedure.
The gluing takes place using solvent-free and formaldehyde-free PUR adhesive from Purbond (HB 110, HB 530) - this adhesive is tested according to DIN 68141 and other strict criteria of the MPA Baden Württemberg, Otto Graf Institute Stuttgart and is recognised for the production of internal and external supporting timber components and special construction methods in accordance with DIN 1052 and EN 301. The glue is applied automatically over the whole surface - the percentage of adhesive is 0.2 kg/m² and glue seam. A very high-quality level of adhesion is achieved as a result of the pressing power of approx. 6 kg/cm2.
The factory cutting and beaming of KLH solid cross-laminated timber boards takes place using state-of-the-art CNC technology. The basis for the cutting is formed by the cutting plans of the client. On request and with the appropriate equipment, the boards can also be cut by the relevant construction company.
|
|
|
|
|
|
Cross-laminated timber (KLH) is produced from spruce strips that are stacked crosswise on top of each other and glued to each other. The PEFC certificate guarantees that the raw material used comes from ecological, economical and socially responsible forests.
The crossways arrangement of the longitudinal and crosswise lamellas reduced the swelling and shrinkage in the board plane to an insignificant minimum - static strength and shape retention increase considerably. Compared to conventional timber construction products, cross-laminated timber offers entirely new possibilities when it comes to load transfer. Not only can loads be transferred in one direction (as is the case, for example, with supports, girders, etc.) but on all sides (referred to as "genuine plate and sheet action").
Only technically dried wood with a wood moisture of 12% (+/- 2%) is used to produce KLH solid cross-laminated timber boards. This rules out any damaging pest, fungus and insect attacks. All boards used are subject to a visual and mechanical quality sorting procedure.
The gluing takes place using solvent-free and formaldehyde-free PUR adhesive from Purbond (HB 110, HB 530) - this adhesive is tested according to DIN 68141 and other strict criteria of the MPA Baden Württemberg, Otto Graf Institute Stuttgart and is recognised for the production of internal and external supporting timber components and special construction methods in accordance with DIN 1052 and EN 301. The glue is applied automatically over the whole surface - the percentage of adhesive is 0.2 kg/m² and glue seam. A very high-quality level of adhesion is achieved as a result of the pressing power of approx. 6 kg/cm2.
The factory cutting and beaming of KLH solid cross-laminated timber boards takes place using state-of-the-art CNC technology. The basis for the cutting is formed by the cutting plans of the client. On request and with the appropriate equipment, the boards can also be cut by the relevant construction company.
|
|
|
|
|
|
Cross-laminated timber (KLH) is produced from spruce strips that are stacked crosswise on top of each other and glued to each other. The PEFC certificate guarantees that the raw material used comes from ecological, economical and socially responsible forests.
The crossways arrangement of the longitudinal and crosswise lamellas reduced the swelling and shrinkage in the board plane to an insignificant minimum - static strength and shape retention increase considerably. Compared to conventional timber construction products, cross-laminated timber offers entirely new possibilities when it comes to load transfer. Not only can loads be transferred in one direction (as is the case, for example, with supports, girders, etc.) but on all sides (referred to as "genuine plate and sheet action").
Only technically dried wood with a wood moisture of 12% (+/- 2%) is used to produce KLH solid cross-laminated timber boards. This rules out any damaging pest, fungus and insect attacks. All boards used are subject to a visual and mechanical quality sorting procedure.
The gluing takes place using solvent-free and formaldehyde-free PUR adhesive from Purbond (HB 110, HB 530) - this adhesive is tested according to DIN 68141 and other strict criteria of the MPA Baden Württemberg, Otto Graf Institute Stuttgart and is recognised for the production of internal and external supporting timber components and special construction methods in accordance with DIN 1052 and EN 301. The glue is applied automatically over the whole surface - the percentage of adhesive is 0.2 kg/m² and glue seam. A very high-quality level of adhesion is achieved as a result of the pressing power of approx. 6 kg/cm2.
The factory cutting and beaming of KLH solid cross-laminated timber boards takes place using state-of-the-art CNC technology. The basis for the cutting is formed by the cutting plans of the client. On request and with the appropriate equipment, the boards can also be cut by the relevant construction company.
|
|
Our natural wood panels are the result of many years' experience in the wood working industry.
Our use of modern, environmentally friendly techniques, as well as systematic quality assurance at all production stages from logs to completed panel, guarantees a consistently high level of quality.
|
|
The concept of the oétech seríes is bas»d on boards of standard cross sections, like 60/180 or 60/240mm.
Boards are layered, offset and screwed to form the posts, rafters and tie-beams. The great second moment of area obtained provides a high bending strength to the members. Bracings are built using the same cross-section to keep a homogeneous appearance. The articulations of the frame are rigid to increase the stiffness and to reduce evermore the amount of wood used.
|
|
The O'portune slab is an innovative horizontal structural system with high mechanical performances for long spans up to 12m
The concept of the slab is based on two fundamental ideas. First, the use of massive staggered timber boards screwed all together, and second, the covering by a board like OSB, micro-lam or equivalent, to create a partially isotropic slab.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
|
|
|
|
Glulam has been called the grandfather of engineering wood, because the first glulam engineered timber was produced over a century ago....log before I Joists of LVL.
Today, glulam is still a fresh choice for designers because of its strength, economy and ambiance. Straight, tapered or curved, it can be ordered in a range of sizes for all types of applications. Its strength for long spans can provide unobstructed view with minimal need for columns or posts.
Glued laminated wood arches, beams and trusses are also a renewable resource, because US foresters plant 5 million trees each day to insure a future supply of wood. this contrasts with steel and concrete, which deplete natural resources.
The combination of high strength and large sizes makes glulam timbers ideal as main load carrying members which can span over 100 feet. In residential construction, glulam beams are commonly used for headers and beams supporting large portions of floor and roof systems.
When glulam materials arrive at the jobsite prefinished or pre-drilled , the delivered product is the finished product. this makes glulam unique as a structural component for many kinds of buildings. other types of framing members arrive on site in raw form, and require additional cladding to create the final production.
Glulam timbers are available in four appearance grades; premium, architectural, industrial and framing.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
ElecoFrame® is a complete timber frame system for open panel walls. ElecoFrame® differs from traditional timber frame systems offering a value added, patented, modern method of construction for house builders, developers and contractors seeking reduced overall costs, enhanced performance, minimised construction times and improved site logistics.
Being a true open panel system, ElecoFrame® takes a modern approach to resolve age old inefficiencies in traditional timber frame systems, utilising superior, diagonally braced, TR26 grade structural softwood in combination with the unique and patented jointing system for unprecedented structural racking strength.
The traditional requirement for external sheathing board and protective membrane is eliminated, resulting in a cost effective system, rigid in build quality but flexible in application.
|
|
|
|
|
|
The complete achievement of HAAS prefabricated construction:
1. Preliminary design + offer support
2. Static computation by our internal stress analysts
3. Work planning with most modern hard and software
4. Supply of technically dried solid wood, BSH, DUO/TRIO, KVH
5. Scantling gathering on CNC steered plants
6. Date-faithful supply to you or directly on the building site
Naturally you can furnish the job planning also as Eigenlleistung. They need for it only a usual market scantling gathering program with interface for a Hundegger Abbundanlage. A supplementing single rod construction program for manual changes and special detail training we put to you gladly at the disposal. After effected input you send electronically at us. We settle all further one then for you - fast, economically, reliably!
Wage scantling gathering - fast, reliably economically.
With most modern CNC computer technology, industrial prefabrication and fate relating to crafts our specialists for high quality and a very good cost-performance ratio ensure.
In modern baking ovens the wood is technically dried.
As carpentry/roofer enterprise or construction industry you have the possibility of letting tie with HAAS of roof framings.
Roofings from wood - always something special
They can stress clearly and geometrically the area and the function continue, them can play and with swinging lines for inspiration provide, them can to dreaming invite and the view open, them can be completely simple. Timber roofs are alive and provide for a healthy room climate.
|
|
|
The Ariane truss is a new timber system for industrial and agricultural buildings of large spans from 15 to 55 metres. It is based on the use of raw planks, which are put together in layers to produce a truss reinforced at the nodes with inserts of micro-laminated veneer plywood.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
