|
|
|
Ventura Open is the office partition which can also be used as a panel wall or a cladding wall in, for example, reception areas or meeting rooms. Like the other products in the Triplan system it can be fully integrated into these products - and relocated. The appearance of Ventura Open walls can vary a lot, depending on the width, height and type of panel surfaces;
|
|
Genesy: an assembling and modular system designed to divide and furnish all kinds of ambient. Born to provide quality, style and design; easy to install, move and modify.
A no-stop research in design and material generates an harmonious and elegant style for people who are looking for quality, affordability and elegance.
Genesy wall partition system enables to build up environments free of acoustical pollution, and also elegant and modern. Aluminium external finishes as well as perforated and plain panels give the environment a new style, accordingly with every need: public and private offices, banks, meeting rooms, executive offices, etc.
|
|
|
|
|
|
The partition wall has an overall thickness of 100mm and has two standard module sizes in the vertical; 511 and 1,022mm while in the horizontal, standard module sizes are 1,022, 1,533 and 2,044mm with any intermediate dimension made to measure. The internal framework of the partition consists entirely of 65 x 22mm metal box sections with holes specially formed in the uprights to accommodate the transoms, to ensure rapid and sturdy assembly.
The uprights, housed in purpose made “U” section guides at floor and ceiling level, are fitted with adjustable feet, enabling the frame to be perfectly fixed and leveled.
The panels and plinths are 18mm thick, melamine faced, perimeter edged in 1mm PVC and fixed with brackets to the uprights, fully enclosing the framework; the latter is fitted with 6mm PVC gaskets between each panel, for infill purposes as well as appearance. Panels are demountable, to provide access to the cavity. The partition is supplied complete with stops and compression seals to improve the level of sound absorbency. Glazing frames are in aluminium, rounded for single glazing but flush with the partition for double-glazing and complete with soft PVC gaskets.
Glazing, both clear and acid etched, is toughened 3+3mm laminated glass complying with current regulations. The blank panels are filled with 50mm thick, low bio-resistance, water-repellent glass wool, treated with thermosetting resin. The glass wool is incombustible, asbestos free, does not produce toxic gases in the event of fire and is faced on both sides with PE coated KRAFT paper (density 40kg / m3).
|
|
The frame is composed of uprights and intermediate profiles made from galvanized steel. Melamine-faced particle board panels (TecnoSpace collection) are invisibly secured to this frame by means of a unique retainer system. This produces a flat wall with minimal 'V pencil junction.
The internal cavity is filled with mineral wool to improve the acoustical and thermical insulation.
The frame of the glazed wall is assembled on site. After this, prefabricated shop-assembled double-glazed window units are fitted in the frame.
|
|
Charm & Privacy
We created this original and modular equipable partition system with galvanized steel structure in order to provide innovative, simple and effective solutions.
DIVA has some unique characteristics, it is possible to remove any modules without affecting adjacent components and the “double faced” panels are independent, interchangeable and reversible. The shape of the steel posts characterizes the system, protected by international patent, allowing clip on glazed and solid panel fixing.
Acoustic insulation and reaction to fire. The DIVA partition system offers a high level of soundproofing to the environments it surrounds thanks to gaskets inserted between its elements and the contact points with the
existing surfaces (floor, ceiling outer walls).
|
|
|
Why a String? You might well ask yourself why we chose this name for a partitioning system. Until, that is, you get to know the system a little better and take a closer look at its exceptional design. Then everything suddenly becomes clear. You see its beautifully moulded thin contours. The refined, subtle lines of its design. You see how the maximum attractiveness has been achieved with the minimum of materials. You experience the seductive look and feel of the colours and materials. And discover the system’s suppleness and surprising flexibility that allows it to fit into every plan or project. String.
|
|
|
|
|
|
|
How beautiful can efficiency be? Take one look at String2 and you know the answer: with this system, partitioning decorations are superfluous. String2 provides the beauty of simplicity. Take, for example, the ingenious 'flush' technique used to join the double glass of the 'Bi-blocks' to the steel frame. Note the simple shadow joints between the panels and be surprised at the way in which the doors form one elegant unity with partitioning systems and doorposts. But String2 also sets new standards in functionalism and ease of use. For example, the system can be 'clicked' together extremely easily. And it can be modified and extended just as easily. Or dismantled and re-erected elsewhere. The system also stands out for its great stability and durabilitythanks in part to partitioning systems that are just a bit thicker than usual. String2 is built to last. And it will look just as good in ten years' time as it does now. Last but not least, String2 performs way above average when it comes to fire safety and acoustics. But that's pretty much what you would expect. After all, it's a Maars product.
|
|
|
In choosing the Maars intersign partitioning system, you're opting for long-lasting quality, style and flexibility. And also for virtually unlimited possibilities for project design. The Maars intersign partitioning system imposes few, if any, restrictions on you. It's quick build steel frame construction allows you almost total freedom to design and achieve almost any required layout. Whether you want horizontal or vertical partitions, totally transparent or solid panels, or a stylish combination of both, the Maars intersign system enables you to translate just about any requirement into a pleasing yet practical reality.
|
|
Clestra's THEMA partition is an elegant partition. It is characterised by the design of the horizontal and vertical profiles, the elegance of the recessed joint to the junctions, the style of the doorway and the subtleness of its various glazed panels.
THEMA panels are demountable. They are made up from two independent frame-mounted sides. The width of the 16 mm thick facings can be adapted depending on the layout of the building. The product's design allows the appearance of the panels to be varied. For example, THEMA allows solid and glazed horizontal panels of different heights and a width that can be as much as 3000 mm.
These options give the partition extremely attractive aesthetic possibilities. The Clestra THEMA partition provides a wide range of quality finishes in: melamine laminate or lacquered natural wood veneer.
|
|
The S9 partition is a variation of the S range partition.
The whole frame structure is identical and only the wall mounted panels provide this high quality finish aspect, the hollow joint.
To underline or erase the partition. Choose the hollow joint, vertical or horizontal.
Covered using every panel type available on the market, laminated melamine or cladded with genuine wood, 16 or 19 mm thick.
S9 one or two sides
The use of a frame structure from the S range allows to have an S9 finish on either one or both sides of the partition. The customisation of an office or passageway in an arrangement of standard partitions is easy and economical.
|
|
The traditional cover strip is removed and the assembly of the facings is provided by buttons.
For glazed partitions or solid partitions
A 13 mm hollow joint between the facings reveals the aluminium upright that can be lacquered in any colour.
Compatible with every 6 to 8 mm thick glass panes with polished edges, or with 12 to 13 mm thick panels with cladded edges, this system offers every dimensional freedom of volumes within the panel dimensions available.
Using the same products, in terms of frame structure as well as facing, except for the treatment of the edge of glass panes and panels, the cost of this partition remains realistic, especially since it can be combined with the 3 other choices of standard Clipper finish - S5 - S7 - S9 which can be individually selected for each side of the partition.
|
|
| ... products without information |
| |
|
Flexica is the most flexible office partition on the market and the wide range of solutions makes it suitable for office environments, focusing on flexibility. Flexica has a narrow horizontal transom that divides the wall into panels.The panels can either be glass, plasterboard or MDF panels covered with vinyl, veneer or steel. Apart from being a flexible, relocatable office partition, Flexica can be combined with other Triplan product ranges.
|
|
|
|
|
|
ANAUNIA moveable soundproof glass partitions offer the solution to the most difficult requests from architects to plan innovative offices, or for flexible ways of working in well-lit, functional and contemporary environments.
The ANAUNIA system is formed of independent glass panels inserted into an aluminium frame which, owing to the smooth gliding mechanism along ceiling-mounted tracks, fixes into position almost invisibly. The panels are opened, closed and soundproofed by a handle-operated system, which allows the upper and lower buffers to move. When the doors forming part of the panel slide into the unit, they are also transparent
The absolute transparency and the minimal space they occupy does not reduce the quality of the soundproofing (up to Rw = 42dB) by using different types of glass, including security room glass from 6 to 33 mm in width
The design and integration with the surrounding environment can also be improved by the opportunity include Venetian blinds, hand-operated or solar-powered blinds, and different grades of tinted glass.
The wide range of thicknesses don’t limit the availability, in place of glass, panels of different materials in an infinite variety of finishes, thereby changing the planned destination from shop to restaurant, or from house to office.
|
|
A double glazed movable wall system combining acoustic performance with ease of operation. Suitable for many different types of location including offices, conference, training and meeting rooms, corridors, schools and hotels.
FEATURES
- Top hung elements move easily and quietly on single or twin point suspensions running in aluminium track
- No floor track required
- Various options available for 'parking' elements when wall is open
- Hinged full height pass doors
- Electrically operated venetian blinds can be fitted within double glazing to give privacy when required. Alternatively, manifestation can be applied to the glass.
- Seals at head and base operated by concealed jacking mechanism using quick release handle
- Option for semi-automatic operation of seals using 'electronic controls'
|
|
Ease of operation, acoustic performance and pleasing aesthetics are combined in System AW to create movable walls that maximise spatial versatility in offices, conference and meeting rooms, training areas, educational establishments, hotels and banqueting suites.
FEATURES:
- Top hung without track at floor level
- Retractable acoustic seals at top and base operated either by quick release handle or semi-automatically with electronic controls
- Single or two point suspension for centre or remote parking options
- Variable track arrangements
- Junction modules meet requirements for corner, three or four way abutments
- Panel finishes include vinyl, veneer, melamine laminate, a magnetic dry wipe enamelled writing surface or paint
- Optional integral pass doors, glazed modules and vision panels
- Closing module fitted with face operated telescopic %u2018nose%u2019
|
|
|
Walltech, self-supporting partition with frame system, immediately reveals qualities and performances that are indispensable in a work place, with its light and essential structure that may be adapted to the layout and requirements of the space planner, its vast range of panelled and glazed modules, easy installation, excellent acoustic insulation quality and compatibility with all the partition systems of Estel. The office is a complex system in which architecture, technology, organisation and human resources interact in a profound way. Space planning becomes an activity that is decisive for business and for the wellbeing of the people who work in it. Walltech, from this point of view, can boast of being a faithful partner to designers and space planners.
|
|
|
The Photo partition is a completely modular solution offering total flexibility for relocation whilst maintaining a high aesthetic visual appearance. The glass is directly fixed to the metallic frame using a UV bonding process. The bond process is completely transparent. The visual appearance is that of continuously flush-fitted glass without any interruptions of frame allowing the reflective qualities of the surface. Both glass sizes of the Photo partition are respectively 6 and 8 mm thick, the engineered method of fixing mechanically allows the junctions a high degree of air tightness, all of which allows the sound insulation to be optimized.
|
|
Clestra's BLOG partition is 83 mm thick and is mounted onto an internal frame.
Solid or glazed, it is demountable. It is constructed out of two independent sides which facings can be up to 16 mm thick to provide high acoustic performance.
The product's design allows the appearance of the facings to be altered as desired by using a variety of colours and formats. Solid elements can be mixed with glazed elements.
|
|
|
|
|
|
Modular Walls with concealed monitoring technique for added security
The protection of Art requires a highly sophisticated security technique that is not visible to visitors and which does not influence the aesthetic of Art or objects being displayed.
At the same time, the modular walls are required to be flexible for designing Temporary, Traveling, and or Art Exhibitions. MBA Design & Display products Corp. has developed a unique security technique that conceals the detection field inside the wall.
mila-wall® modular walls can be prepared for concealed object monitoring that can be connected to an alarm system. Electrodes are built into the wall in a defined area (as shown). This area creates an electrical detection field when connected to an alarm system of your choice. An electrical field will surround and protect the art or object hung on the wall module. Any change of the field by people or objects will change the electrical field which in turn releases an announcement. This announcement can be forwarded to a facility alarm system or it can release an optical or acoustical alarm directed at the protected object. The electrical field begins at approximately 39” (1000 mm) from the bottom of the wall module and ends at approximately 98” (2500 mm) from the bottom. This provides a detection field of approximately 60” (1500 mm) in height. The sensitivity in which an alarm is released can be adjusted to meet your requirements. The maximum detection distance begins approximately 15 ½” (400 mm) away from the wall module.
|
|
New interactive sound wall
mila-wall soundwall can now be constructed with integrated sensors to complement the invisible loudspeakers. These sensors react to movement or touch. Both sensors trigger a response from a mini computer, on which audio messages are stored as MP3 files on a compact flash card. The touch sensitive sensors can also be used for volume control.
Each wall module surface can contain up to 16 independently positioned sensors. The sensors are completely invisible. Sound can be played by simply touching the sensor fields. Interactive soundwall will attract more interest in your exhibit, by allowing your audience to hear as well as see the exhibition.
Innovation award
MBA wins 2008 innovation award in architecture and presentation for the product mila-wall soundwall in the category of products with high architectural quality.
|
|
|
The "apogee" is a partition-wall cast solid with sharp joints, dismountable, thickness 70 mm, consisted of an insulating heart and two facings...
|
|
|
|
