|
|
The concept of the oétech seríes is bas»d on boards of standard cross sections, like 60/180 or 60/240mm.
Boards are layered, offset and screwed to form the posts, rafters and tie-beams. The great second moment of area obtained provides a high bending strength to the members. Bracings are built using the same cross-section to keep a homogeneous appearance. The articulations of the frame are rigid to increase the stiffness and to reduce evermore the amount of wood used.
|
|
The O'portune slab is an innovative horizontal structural system with high mechanical performances for long spans up to 12m
The concept of the slab is based on two fundamental ideas. First, the use of massive staggered timber boards screwed all together, and second, the covering by a board like OSB, micro-lam or equivalent, to create a partially isotropic slab.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
|
|
|
|
Glulam has been called the grandfather of engineering wood, because the first glulam engineered timber was produced over a century ago....log before I Joists of LVL.
Today, glulam is still a fresh choice for designers because of its strength, economy and ambiance. Straight, tapered or curved, it can be ordered in a range of sizes for all types of applications. Its strength for long spans can provide unobstructed view with minimal need for columns or posts.
Glued laminated wood arches, beams and trusses are also a renewable resource, because US foresters plant 5 million trees each day to insure a future supply of wood. this contrasts with steel and concrete, which deplete natural resources.
The combination of high strength and large sizes makes glulam timbers ideal as main load carrying members which can span over 100 feet. In residential construction, glulam beams are commonly used for headers and beams supporting large portions of floor and roof systems.
When glulam materials arrive at the jobsite prefinished or pre-drilled , the delivered product is the finished product. this makes glulam unique as a structural component for many kinds of buildings. other types of framing members arrive on site in raw form, and require additional cladding to create the final production.
Glulam timbers are available in four appearance grades; premium, architectural, industrial and framing.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
ElecoFrame® is a complete timber frame system for open panel walls. ElecoFrame® differs from traditional timber frame systems offering a value added, patented, modern method of construction for house builders, developers and contractors seeking reduced overall costs, enhanced performance, minimised construction times and improved site logistics.
Being a true open panel system, ElecoFrame® takes a modern approach to resolve age old inefficiencies in traditional timber frame systems, utilising superior, diagonally braced, TR26 grade structural softwood in combination with the unique and patented jointing system for unprecedented structural racking strength.
The traditional requirement for external sheathing board and protective membrane is eliminated, resulting in a cost effective system, rigid in build quality but flexible in application.
|
|
|
|
|
|
The complete achievement of HAAS prefabricated construction:
1. Preliminary design + offer support
2. Static computation by our internal stress analysts
3. Work planning with most modern hard and software
4. Supply of technically dried solid wood, BSH, DUO/TRIO, KVH
5. Scantling gathering on CNC steered plants
6. Date-faithful supply to you or directly on the building site
Naturally you can furnish the job planning also as Eigenlleistung. They need for it only a usual market scantling gathering program with interface for a Hundegger Abbundanlage. A supplementing single rod construction program for manual changes and special detail training we put to you gladly at the disposal. After effected input you send electronically at us. We settle all further one then for you - fast, economically, reliably!
Wage scantling gathering - fast, reliably economically.
With most modern CNC computer technology, industrial prefabrication and fate relating to crafts our specialists for high quality and a very good cost-performance ratio ensure.
In modern baking ovens the wood is technically dried.
As carpentry/roofer enterprise or construction industry you have the possibility of letting tie with HAAS of roof framings.
Roofings from wood - always something special
They can stress clearly and geometrically the area and the function continue, them can play and with swinging lines for inspiration provide, them can to dreaming invite and the view open, them can be completely simple. Timber roofs are alive and provide for a healthy room climate.
|
|
|
The Ariane truss is a new timber system for industrial and agricultural buildings of large spans from 15 to 55 metres. It is based on the use of raw planks, which are put together in layers to produce a truss reinforced at the nodes with inserts of micro-laminated veneer plywood.
|
|
Developing from the family craft business founded in 1929, the Jacob Group specialises in the manufacture of wooden components for the construction industry. Its manufacturing activities are concentrated around two distinct areas:
- The manufacture of “Roof Trusses”: JACOB Structures Bois, a subsidiary, manufactures industrialised roof trusses and traditional, digitally cut roof timbers
- The manufacture of “Pre-fabricated framework, walls and coverings for buildings”:
POBI, another subsidiary, offers a complete range of manufactured pre-fabricated components (floors, walls and roof parts) finished in the factory and destined for professionals working in the construction of private houses, social housing, professional premises and collective buildings.
|
|
| ... products without information |
| |
ELYCOP® is a sandwich pre-fabricated roofing system, insulating and self-bearing, precurved to a fixed radius of 3.30 m.
The modular elements create an opaque roof, diffused shed light interrupted by ELYPLAST® (C496) double-walled skylights.
ELYCOP® is used on pre-fabricated structures with alternating wing-shaped or Y beams, to create a light, dependable and functional roof.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
- 3 Greek tightening
- wide range of surface finishes
- ideal for roofing
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet stainless steel AISI 304 or316. Treatment of inner surface with a special machining of promoting the adhesion of polyurethane.
|
|
Mineral fibers
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
ELYCOP® is a sandwich pre-fabricated roofing system, insulating and self-bearing, precurved to a fixed radius of 3.30 m.
The modular elements create an opaque roof, diffused shed light interrupted by ELYPLAST® (C496) double-walled skylights.
ELYCOP® is used on pre-fabricated structures with alternating wing-shaped or Y beams, to create a light, dependable and functional roof.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
- 3 Greek tightening
- wide range of surface finishes
- ideal for roofing
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet stainless steel AISI 304 or316. Treatment of inner surface with a special machining of promoting the adhesion of polyurethane.
|
|
Mineral fibers
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
|
|