Roof fans

... Combining passive ventilation, heat recovery and system intelligence to deliver 100% fresh air and comfortable temperatures. A natural way to ventilate your building, reducing heat loss without the need for fans. Integrating passive ventilation with ...

Length: 7'00"
Power: 60 W - 697 W

If you’re looking for more cool for your cash, then meet the new Engineered Performance Series Whole House Fans from Solatube. The powerful circulation provided by our Whole House Fans means your A/C unit can chill and only work when needed—significantly ...

The TD (horizontal discharge) and the TV (vertical discharge) are ideally adapted to your roof installations. The classic assembly is carried out with a standardized base but specific adaptation and dimensions can be studied and suggested. For optimum ...

Noise level: 76 dB - 95 dB
Weight: 44 kg - 120 kg
Height: 526 mm - 919 mm

... Roof Mounted Vertical Discharge Centrifugal Fan • 6 standard sizes from 350mm to 630mm • Air volume flow rates up to 3.819 m% • Static pressures up to 1044 Pa • Suitable for operating temperatures of up to +120°C • Can be mounted at angles of up ...

... The industrial wind aireator is installed along the highest part of the builiding and its performance is based on the use of wind energy and in the pressure difference between the inside and the outside of the facilities. The industrial wind aireator ...

Height: 5 cm - 10 cm
Width: 53 cm
Length: 53 cm

Air flow: 1,450 m³/h - 24,700 m³/h
Noise level: 37 dB - 64 dB
Weight: 25 kg - 205 kg

... For deck or roof mounting and suitable for: •Ventilation in general •Renovation of flawed environments in all types of buildings and industries. •Smoke extraction. •Domestic and industrial hoods. Series composed of 9 different types from size ...

... The Ecco Basic Wind Extractor is a ventilation and extraction system that provides permanent air renewal 24 hours a day, increasing comfort and, therefore, improving environmental conditions. Its operation is based on the use of two fictitious engines: • ...

... The VCR fans range offers several models with capacities going from 0 m3/h up to 3500 m3/h that equip residentiel and non-residential buildings. The VCR fans are designed for an outdoor installation, but also for indoor environment. Moreover, VCR fans ...

... Unforced ventilation system for industrial warehouses. Static ventilation allows us to: Renew stale air. Evacuate the heat produced by industrial activity or radiation, lowering the building’s temperature. Improve the building’s humidity ...

SE Controls’ SHEVTEC® range of fans are designed to extract hot gases from corridors and lobbies via smoke shafts. All fan sets are tested to European Standard EN12101-3 and installed as part of a fire engineered solution. There are advantages in using ...

Fischbach roof top units have been specially developed for use in effective ventilation systems. The complete range is made of water-resistant material with a 40mm strong isolation and is also equipped with galvanized bird grids. Especially by our EC-motor ...

Power: 1,500 W - 18,500 W

... Roof-mounted centrifugal fan for smoke extraction with vertical air discharge. Smoke exhaust fans are used in emergency exhaust ventilation systems for forced extraction of smoke and heated gases and simultaneous transfer of heat away and beyond the ...

The roof ventilator has been used for many years to ventilate and de-air eaves, flat roofs, ridges and groins on the metal roof. For snowy areas or buildings in exposed locations, the ventilator can also be supplied with additional snow protection.

The Gamma Series of centrifugal roof units has been designed for use in commercial ducted exhaust applications. These compact and low profile units are fitted with birdmesh to prevent the entry of birds and vermin into the ducting or building. They are ...

... SOLA-BOOST CLASSIC: Energy free natural ventilation system SOLA-BOOST® is an extension of the proven WINDCATCHER design, providing additional ventilation on sunny days whilst maintaining zero running costs. We have improved the potential of WINDCATCHER ...

Oblong rotating cowl is used in chimney ventilations ducts. Oblong cowl is made in diameter 150. Cowl can be made from aluminum material or acid-resistance material.

... MATERIAL - : - Impeller is made of galvanized sheet or aluminium sheet INSULATION CLASS - : - Class B & Class F STANDARD - : - EN 60335, EN 60335-2-80 SPEED CONTROL - : - Speed can be adjusted using an optional Controller USES - : - Industrial applications, ...

Width: 315, 1,250 mm
Length: 315 mm

... VENCO Axial Smoke Exhaust Fans are fire resistant fans used in car park and subway ventilation projects. The best matching fan is supplied in the wide range by selecting several blade- hub combinations and adjustable blade angles. F400 certified harmonized ...

... It's an air grating made of PVC. Only colour: clay. Exclusive. To be laid on the last tile row on a ridgeline. They have a joggle in order to be fixed to the upper part of the tiles that are in the last row. There are two types available: 1) frontal ...

... HB-VentPiombo provides ventilation to the ridge beam. It is dry-applied. Its 90 mm size is ideal for gutter and plain tiles, the 140 mm version is ideal for Spanish, Roman and channel tiles, and the 175 mm is specifically designed for channel tile roofs. Material Alu-Zinc ...

... Ventilation that seamlessly integrates with your roof Dimension: 500mm x 412mm 420mm x 412mm Weight: 1.00kg 1.50kg 2.50kg 1.2kg ...

Ridge ventilating element designed for ridge and hips and suitable for application with nearly all types of roof coverings. Made of high-quality plastic and stabilized against UV radiation. Special openings ensure proper air circulation within the roof ...

IcoAir is the new way of ensuring your roof space from the occurrence of excessive condensation. The IcoAir ventilation piece can be installed from the outside as well as from the inside of the roof space. This is a major advantage as its almost impossible ...