|
|
Available in 3 sizes.
These ceiling equipment allow the treatment of air using a laminar blowing effect (Cohanda).
In this aim, they are inserted between the false ceiling plates, since they are of the same standard dimensions (600 x 600 mm).
Particularly suited to erection of buildings offices, the ceiling plate is available in RAL 9010 standard paint.
EUROVENT approved equipment.
|
|
Features
The ceiling fancoil is designed for room air control in both winter and summer months.
The unit to be ceiling mounted.
The FCA unit must be installed with the GLA accessory, which features an elegant grill designed to blend perfectly with standard panelling of false ceiling..
|
|
Water terminal unit
Cassette-type indoor installation
Capacity from 2,68 to 11 kW
The ELFOSpace BOX2 terminal unit has been designed for installation in suspended ceilings without requiring any extra part for operation. The unit has an intake grille and four-way outlet with adjustable diffuser flaps for changing airflow direction.The ELFOSpace BOX2 is therefore suited for use in environments such as shops, restaurants, hotels and gyms, where the excellent outflowing air control makes them ideal air-conditioning units:
-available in version for 2 and 4-pipe systems;
-available in electro-mechanical or electronic version with set-up for connection to ELFOControl or general supervisors;
-possibility of controlling several units from a single point;
-suited for installation in standard suspended ceilings with 600 x 600 mm module;
-the unit comes with a condensate drain pump (500 mm vertical).
|
|
The new Cassette fan coil unit has been biult for installations in suspended modular or not ceilings, for 2 or 4 pype systems.
Supplied with water, it is suitable for air heating and cooling purposes according to the requirements.
The unit, completed with the condensate pump, can be supplied by request of an additional air delivery that can be connected to ducts for a separate supply air, and of additional extarnal air intakes.
The air intake panel directs the air flow in order to prevent that air hits the user directly. Therefore, the maximum confort is ensured in every enviroment and position.
The Cassette unit can be managed by all the range of Eurapo regulation (valves and controllers).
|
|
|
Innovative and fascinating design, seven different models, high control flexibility, ease of maintenance: the new SKYSTAR water cassette is the result of significant technical and design research focused on providing an avant-garde product in terms of performance, low noise and control flexibility.
|
|
|
|
|
|
Cassette Terminal units for air/water
Chillers and Heat Pumps
5 sizes - 2 and 4-pipe coils
Cooling capacity: from 2150 to 9920 W
Heating capacity: from 2830 to 13000 W
Available with both infrared remote controller and wired remote controller
The CWX units are water chilled Terminal units designed for the air conditioning of commercial premises such as shops, offices, stores, meeting rooms, commercial surfaces, hotels.
Their installation in the false ceiling allow to hide the supply pipes, leaving wall spice completely clear. The models CWX3 and CWX5 can be extremely discreetly installed, their dimension being exactly the same as those of the false ceiling panel (600mmx600mm).
Available versions: 2-pipe coils, 2 pipes/2 wires and 4-pipe coils.
Very low noise level.
The air diffusion is obtained on the 4 sides of the grill.
The units are available with infrared remote controller or wired remote controllers, manual (RAB 30) or automatic (RCC 10 for CWX3/5/6/8/10B5B and RCC 20 for CWX3/5 BE5B/BW5B). The infrared remote controller is provided in standard with the unit, the wired remote controllers are available as accessories.
These cassettes are fitted with a manual air vent and a condensate drain pump.
Fonctions common to all cassette models:
- Cooling or heating by 2-pipe coil.
- Ventilation with integrated filtration.
|
|
Chassis manufactured from galvanized steel. An acoustic and anticondensation insulation is fitted within. Air flow by means of four rectangular opening
Main heat exchanger: Copper tubes/aluminium fins with threated connections; each coil is fitted with a manual air vent and drain plug. The coil is tested at a pressure of 15 ATE.
External rotor fan with ABS centrifugal impellers, single inlet, statically and dynamically balanced.
Single phase 230V 50Hz motor, induction type, fitted with condenser. The motor complies with IP41 protection class and ECM Standards (EC89/336, EC92/31, EC93/68) and with low voltage standards (Art. 10, EC73/23). Available with 3 speeds.
Main drain pan manufactured from preformated plastic material.
Filter: syntetic media with a galvanized sheet frame with mesh on both sides.
|
|
Professional Misting fan adapted to a high number of applications, low pedestal or wall /ceiling mounted. IP55. High Velocity. Very solid and robust. Diam. of the fan 400mm.
With mistring 4 nozzles 0.3mm or 0.2mm (ring with morel nozzles available on request). Quick connection slip-lock for 3 / 8 "tube
-Equiped with a handle for easy displacement .
-Low pedestal 50 cm
-Tube adapted for suspension with profiles or chains
-security-grills to both ends according to EC-norms
-3 speed- motor / Electrical Cable (3 metres)
|
|
The FUN is available in 3 sizes. Its rate of flow range is comprised between 100 and 1 400 m3/h.
Its small height allows it to be inserted in difficult applications, or allows suppression of condensate pumps.
The exceptional available pressure allows meeting the requirements of hotels, office building, hospital…where the equipment is installed over less sensitive areas and connected to highly consequent air duct network.
Of simple modular design, this equipment offers a great facility of mounting in false ceilings or floors.
Eurovent approved equipment.
|
|
Industrial buildings typically exhaust large quantities of air. This air must be replaced, otherwise problems will occur such as cold drafts around doors, reverse flows through gravity vents and chimneys, and inefficient operation of mechanical exhaust equipment.
The SolarWall fan system is a low cost method to remedy these problems. It can:
-reduce heating costs by utilizing stratified heat under the ceiling
-destratify indoor air temperatures from ceiling to floor
-permit exhaust systems to operate properly during the heating season
-eliminate cold drafts due to the infiltration of outdoor air
-prevent reverse flow through gravity vents and chimneys
-improve the operation of heating equipment
-solve indoor air quality problem
|
|
Water terminal unit
Exposed vertical and horizontal indoor installation
Capacity from 1,5 to 9 kW
ELFOSpace OUT is the exposed water terminal for use in the services sector.Muted lines that blend in with any decor.The available controls are simple and user-friendly, satisfying the most varied of requirements, with top-of-the-range electronic control designed for connection to the ELFOControl or general supervisors.Low noise operation and easy to clean.These are the concepts behind the development of ELFOSpace, the last generation room terminal unit that is ideal for any installation.Ten sizes available with an almost countless number of accessories for resolving any service application requirement.The ELFOSpace OUT-V series has been designed specifically for exposed vertical installation and the ELFOSpace OUT-H range for exposed horizontal installation.
|
|
|
|
|
|
Water terminal unit
Built-in horizontal indoor installation
Ductable
Capacity from 8,7 to 40,3 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-temperature setting
-manual setting of fan speed
-other useful functions
The ELFODuct CF units are ideal air-treatment terminal units for installations where ducted air distribution is necessary.They are designed for installation in suspended ceilings and are distinguished by their compactness and extremely low noise levels obtained thanks to both internal and external insulation.
The 91 and 121 versions may be ceiling or floor mounted.
The main features are:
-various available controls, from simple speed control through to the electronic control set-up for connection to ELFOControl or general supervisors;
-available in version for 2 and 4-pipe systems;
-wide choice of aeraulic accessories (plenum for round ducts, fresh air intake plenum);
-electric heater section with different power plus electronic power modulation control;
-high head-pressure fans for ducted air distribution.
|
|
|
|
|
|
Water terminal unit
Built-in horizontal indoor installation
Capacity from 1,5 to 2,8 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-4 temperature setting
-automatic or manual setting of fan speed
-other useful functions.
ELFORoom UP is the built-in horizontal water terminal unit for residential use.Room terminal units have always been one of the most critical points in airconditioning systems due to problems of noise as well as stratification and filtration of air.Clivet has an innovative approach to these types of elements, which goes beyond the concept of fan coil and offers a new way of providing individual comfort.The ELFORoom series is fitted with a special direct-current external rotor motor and with integrated electronics for a modulating control of the speed of rotation. The temperature is controlled through continual adaptation of the fan speed. This results in the following benefits:
-even temperature throughout the room: the continual modulation of the ELFORoom UP speed ensures continual movement of the air
-reduced noise levels: the control allows continuous adaptation of the speed and its variations become background noise
-filtration: the continual movement of the air allows constant filtration through the large filter, which is accessible without needing tools
-less use of the installed power: the exclusive electric motor of the fan brings great benefits in terms of absorption, which is 80% less than with a traditional fan coil, power being equal.ELFORoom UP comes with all the necessary parts for complete installation (cutoff taps, etc.) and operation.
|
|
|
The new EBH air handling units are available in 4 sizes, for horizontal concealed installation, 2 and 4 pipe systems. These units, thanks to their high E.S.P. fans, are suitable for centralised ducted air distribution with external static pressure values up to 250 Pa. They are therefore suitable for air conditioning and heating in every kind of big environments.Hydraulic connections can be right hand or left hand, because they can be reversed on site. 4 brackets are supplied together with the unit, in order to fix it on the ceiling.
|
|
|
The MAESTRO Fan Coil Units are for concealed installation and connection to a duct system. They supply a consistent air flow with static pressure up to 150 Pa. The MAESTRO Fan Coil Units are manufactured in 5 sizes for hot water supply (11-42 kW) and chilled water supply (4-16 kW).
|
|
|
The SLIM ducted fan coils can be used to economically heat and/or cool small and medium-sized civil, commercial, industrial and sporting facilities. They have been designed and built for horizontal concealed installation. The range features 4 sizes, each with 5 speed fans, 3 of which connected on the terminal block. Numerous wired controllers are available, as well as infrared remote control.
|
|
Duct fans with rectangular connection.
Air flows: 140-3350 l/s
|
|
Zehnder ComfoAir 350 ventilation system
The two devices Zehnder ComfoAir G90 (280 m³/h) and the Zehnder ComfoAir G91 (350 m³/h) are combined into one product as part of a change to new product versions. The ventilation device Zehnder ComfoAir 350 moves at an external pressure of 100 Pa and a maximum of 350 m³/h. The smallest adjustable air flow is 50 m³/h. The large adjustment range facilitates application of the device in flats, single-family houses, meeting rooms, classrooms and commercial buildings.
|
|
Zehnder ConfoAir 500 ventilation system
The Zehnder ComfoAir 500 ventilation device was designed for use in up-market home and commercial applications. It combines highest comfort, simple operation and high energy efficiency. The Zehnder ComfoAir 500 can move a maximum of 500 m³/h of air at an external pressure of 100 Pa.
|
|
|
The comfort ventilation system Zehnder ComfoAir 140 was specifically developed for space-saving applications in sophisticated residential and commercial buildings. It combines highest comfort, simple operation and high efficiency. The Zehnder ComfoAir 140 has powerful DC fans and moves up to approx. 140 m³/h air at an external pressure of 100 Pa.
|
|
|
|
|
|
42BJ Individual Comfort Modules, Ducted
Brief Description:
The 42BJ compact U-shaped ducted unit benefits from having both the inlet and outlet on the same side. It has a variable-speed fan motor, offering a choice of speeds to suit the client’s needs. Available in three sizes with two-pipe, two-pipe plus electric heater or four-pipe coils. The 42BJ has a low height of just 270mm for certain models, offers air flow ranges from 140 to 230 l/s, and cooling capacities from 3.4 to 5.7 kW and heating capacities from 3.3 to 6.5 kW.
Three sizes with two-pipe, two-pipe plus electric heater or 4-pipe coils, with an air flow range from 140 to 230 l/s, a cooling capacity range from 3.4 to 5.7 kW and a heating capacity range from 3.3 to 6.5 kW.
Compact, U-shaped ducted chilled-water fan coil systems, designed for installation above false ceilings in corridors.
Reliable and economical cooling and heating for light commercial and office applications.
U-shape model with inlet and outlet on the same side.
Compatible with the 35BD/SR air diffuser range.
Low height of 270 mm (sizes 1.3 and 2.3).
Extra low sound level in ducted air distribution system.
Variable-speed fan motor, offering a choice of speeds to suit the project.
High-pressure centrifugal fans, compatible with air distribution systems up to 300 Pa.
High-efficiency EU4 filter.
Safe factory-installed electric heater for single or two-stage hot water heating.
Low hydraulic pressure drop with a valve mounted, compatible with all chiller pump kits.
Quick installation with factory-installed options (controls, valves).
Available with demand control ventilation (DCV) and CO2 sensor.
|
|
|
|
|
|
Ideal for installation in motels, apartments, and other multi-room buildings, 42 series fan coils combine heating and cooling performance with easy, low-cost installation. The 42D units are designed for medium static, ducted applications, using furred-in, horizontal and vertical models, or exposed ceiling painted cabinet models. Optional decorative colors allow the unit to blend with any interior design.
Performance Features:
- Airflow capacities from 600 to 2000 cfm
- 2-pipe or 4-pipe system combinations (factory-installed option)
- Valve packages available (field-installed accessory)
- Several motor voltage options (factory-installed option)
- 3-speed
- Quiet motors and fans
- Line voltage or 24 v control options available (factory-installed option)
- 18 gage, galvanized steel casing construction
- Unit casing lined with ½ in. thick, dual density fiberglass insulation
- Multiple casing liners available (factory-installed option)
- Coated and pitched, galvanized steel drain pan
- Stainless steel drain pans available (factory-installed option)
- Certified performance in accordance with ARI Standard 440
|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is no residual pressure with this equipment, they are used for direct blowing either hanging or wall mounted but never with air shaft.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
Fan coil with super thin and elegant design. Heating and Cooling function.
Best radiator replacement. Best partner of heating & cooling heat pump(reversible heat pump).
Detailed Description
Small dimensions with compact structure for ceiling Safe and reliable, long service life and low noise
High performance coils by USA OAK facilities
Airflow: 200CFM to 1400CFM
Fan type: centrifugal Static pressure (L/M/H static): 12/30/50Pa
I&O connetion: 3/4"
Power supply: 230V/1PH/50Hz
Capacity: 18K -60K btu
|
|
* self-standing convector with a width of 156 mm
* only for heating of dry environments
* equipped with the thermostatic head.
DIMENSIONS
total width
156 mm
construction height
135 mm
length
900 - 2000 mm
USAGE
Self-standing convector SP0 is a fast reacting heating unit from a new design series of MINIB self-standing convectors without the fan. The aluminium cover of the unit can be supplied with silver, light bronze, dark bronze or white-varnished coating.
|
|
* self-standing or wall MINIB convector with the fan
* equipped with the thermoelectric generator of el. energy
* this convector does not require individual el. installation
* equipped with the thermostatic head
* heating of dry interiors
DIMENSIONS
total width
156 mm
construction height
240 mm
length
900 - 2000 mm
USAGE
PTG convector is a fast reacting heating unit equipped with the thermoelectric generator. There is not needed to install any cable connection to convectors because el. energy is generated from the warm water supplied to the heat exchanger through the PTG system. The aluminium cover of the unit is supplied with varnished coating in colour tints – silver, white, light or dark bronze.
|
|
* MINIB self-standing convector with a width of 156 mm
* only for heating of dry environments
* high heat output of the convector without the fan
* equipped with the thermostatic head.
DIMENSIONS
total width
156 mm
construction height
400 mm
length
900 - 2000 mm
USAGE
Self-standing convector SP2/4 is a fast reacting heating unit from a new design series of MINIB self-standing convectors without the fan. The aluminium cover of the unit can be supplied with silver, light bronze, dark bronze or white-varnished coating.
|
|
* self-standing floor convector with a width of only 116 mm
* only for heating of dry environments
* equipped with the thermostatic head.
DIMENSIONS
total width
116 mm
construction height
230 mm
length
900 - 2000 mm
USAGE
Convector SU1 is a fast reacting heating unit from a new design series of MINIB self-standing convectors without the fan. The aluminium cover of the unit can be supplied with silver, light bronze, dark bronze or white-varnished coating.
|
|
* Minib heating bench with heat output higher than 1.3 kW for 1 m long convector
* for heating dry and wet environments
* cover board from real marble
* load capacity of the bench up to 150 kg
* equipped with the thermostatic head
DIMENSIONS
total width
281 mm
construction height
435 mm
length
1000, 1250 & 1500 mm
USAGE
COIL-LP is a fast responding heating unit with a medium heat output. The bench heater is manufactured from silver, light or eventually dark bronze finish aluminium alloy or white Ral paint finish. This bench heater is an aesthetic heating option for interiors and swimming pool areas. Marble tops are provided in a range of designs - see details on left. The bench heater is designed for a load up to 150 kg.
Info:
Lengths 1000 and 1250 mm are supplied with the marble top and the convector length of 1500 mm with the beech wooden top.
|
|
* for heating dry interiors
* easthetic all wood self-standing convector
* medium heat output from natural convection
DIMENSIONS
total width
176 mm
construction height
214 mm
length
900 - 2000 mm
USAGE
COIL – DP is the MINIB floor self-standing convector specially designed as an aesthetic interior option made from solid wood.
info:
The decorative all wood grille of the convector must not be covered or loaded. The convector is manufactured in beech with matt varnish finish
|
|
|
|
Fan coils
