|
|
Dehumidifiers for swimming pools furniture, Jacuzzi, sausage drying, industrial process, etc...
A large variety of options from equipment with console to equipments with their ductwork.
Covered pools, drying process in food industry and other industries. |
|
• Sealed reciprocating compressor
• Built - in humidistat
• Timer
• Power cord with plug
• Automatic de-icing cycle for low temperatures (injection of hot gas)
• Tank for collection water
• Possibility of direct water draining
• No emission of polluting agents
• Use of safe and eco-compatible coolant
• Rubber wheels
• Tubular handle
• On/off switch
• Warning lamp furniture for malfunctioning
|
|
All process industry applications where there are stringent demands for regulation of moisture and temperature, eg, pharmaceuticals, food, electronics, etc.
As close to tailor-made as you can get, MDU is constructed around a modular system in which all units are designed to meet the specific preferences and fulfil EU norms for performance and quality at the same time. |
|
| For medium sized premises in the process industry where demands for regulation of temperature and moisture are high. |
|
Professional Dehumidifiers
Ideal under all conditions
Olimpia Splendid, leader in the dehumidification sector has designed the Professional range to meet the requirements of those who demand the best. The products have been completely revitalised in terms of performance protection and appeal: They are ideal for professional use under all conditions.
A coordinated range
All the Professional Range feature:
rust-proof steel structure, large visibile 10 litre tank, handy caster wheels, easily read digital display, electronic controls, adjustable electronic umidity level display, air filter, possible continuous operation with hose, full tank signal, automatic defrost system, atmospheric humidity display.
|
|
Dehumidifiers for domestic or commercial application dehumidification capacity: from 10 to 60 litres/24h.
Their function: extract ambient humidity to create an adequate and comfortable and avoid premature ageing of materials.
Adequate for bathrooms suppliers, kitchens manufacturers, lounges, libraries, archives, wineries, etc.. |
|
• Large capacity tank: 5.5 litres.
• Double water draining system: it eliminates condenses in order to unload the removed humidity: in tank or uninterruptedly through an appropriate small tube.
• Humidistat.
• "Tank Control System": it interrupts the operation of the appliance when the tank is full. It works also with the continuous draining.
• 2-speed ventilation.
• Electronic antifreeze.
• Visible water level.
• Only fan function for air filtration.
• Practical washable air filter: it filters the dust in the air.
• It can be moved easily, thanks to its castors and handles.
• Ecological gas R134a.
|
|
Numerical dehumidifier suppliers.
Electronic adjustment with numerical screen
Indicator of the level of moisture HR %
Function selector: Fuzzy function, Function ventilation "Air Clean",
Continuous dehumidification, Establishment of % of desired moisture
2 speeds: rapid and slow
Programmable up to 9 a.m.
Adapted at piece-rates whose surface reaches up to 150 m2
Capacity: 22 L/24:00
Removable reserve of 5 liters
Automatic check defrosting
Respectful product cooling R-134a environment, without CFC nor HCFC
Power: 600 W |
|
In any season, excess humidity in your home can make for an uncomfortable indoor environment. Dampness, stickiness, and odors are just a few of the many symptoms associated with air that has too much moisture. Honeywell has a solution with our Whole House Dehumidifier. Unlike portable units, a Whole House Dehumidifier is installed in your home’s central heating and cooling system, and works to eliminate excess moisture in all rooms throughout your home. Honeywell’s DH90 Dehumidifier features an integrated home ventilation control that introduces outside fresh air into the home.
Key Features
• Up to 90 pints/day
• Packaged with H8908C Dehumidistat and W8150 ventilation controller
• Uses only 6.2 Amps for energy efficiency
• Built in Ventilation Port
• Provides MERV 11 filtration
• Meets American Lung Association® Heath House® Guidelines
• 5 Year Warranty
|
|
| The MG50 desiccant dehumidifier is designed to efficiently dehumidify air. Its very compact construction incorporates sections held together by four bolts. The fan, desiccant rotor and reactivation heater are secured in fixed positions within their respective sections without utilizing additional attachments. One of the sections contains a distribution chamber with isolated sections that provide a precise balance for dehumidification and reactivation airflows. Its rugged casing is constructed from corrosion resistant die cast aluminium. The electrical control system conforms to EN 60204 (IEC204) standards and the electrical components are assembled in the upper compartment. MG Series dehumidifiers conform to both harmonised European Standards and to CE marking specifications |
|
| The M120 desiccant dehumidifier supplier is designed to efficiently dehumidify air . Its very compact construction incorporates sections held together by four bolts. The sections contain fans furniture that are driven by a common motor, a direct gear driven desiccant rotor, and a reactivation airflow heater. The two end casings contain distribution chambers with isolated sections that provide a precise balance for dehumidification and reactivation airflows. Its rugged casing is constructed from corrosion resistant die cast aluminium. The electrical control system conforms to EN 60204 (IEC204) standards and the electrical components are assembled in the front compartment. The M120 dehumidifier conforms to both harmonised European Standards and to CE marking specifications. |
|
Clean air
Finally, moisture-free air is also purified of dust particles which can be harmful for respiratory health. Thanks to the efficiency of the activated carbon filters in SeccoPur and SeccoPur Thermo, after the dehumidification process, the air returned to the environment has also been purified: the unpleasant odours that develop in closed environments (e.g. cigarette smoke) and dusts that can make breathing difficult have all been removed.
|
|
Futurist and extremely elegant design design, bringing a refined touch to Your house.
High operating efficiency, compact dimension and low electrical consumption.
A range of 4 capacities of dehumidification, from 12 to 20 liters.
Back air intake and vertical airflow allow to place this dehumidifier everywhere.
Anti-mould and anti-bacteria washable filters, easy to extract for cleaning.
Easy adjustment of the relative humidity by means of a hygrostat.
Transparent insert on the tank for a constant control of the level of the condensates.
Predisposition for the continuos discharge of the condensates (on the rear).
Defrosting system for low temperatures operation.
3 indicators on the front design panel of the dehumidifier make it possible to continuously control the defrosting cycle, the filling of the tank and the operation of the unit.
An design alarm system stops the operation of the dehumidifier when the tank is full.
Condensing water tank easy to extract to empty.
Unit easy to move thanks to its comfortable handles and special multidirectional wheels.
Useful cable winding space on the rear.
Antifreeze position.
Ecological refrigerant R134a.
Very silent rotary compressor.
|
|
Dehumidifiers for industrial application, dehumidification capacity: from 53 to 80 litres/24 hours.
Their function: extract ambient humidity to create an adequate and comfortable and avoid premature ageing of materials.
Ideal equipment for drying acceleration in the construction sector, food industry, big premises, offices, greenhouses, and industrial applications in general. |
|
The MLT800L desiccant dehumidifier suppliers with air cooled condenser is designed to efficiently dehumidify in unheated closed spaces using minimal energy. The wet air from the dehumidifier is passed through the air cooled condenser and then returned to the rotor in a closed loop circuit. The components within the closed loop are constructed of stainless steel and thermoset plastic. Water removed by the condenser is drained away. The heat from the air cooled condenser is then either used in the application or ducted away.
Its rugged formed metal frame and access panels furniture are produced from corrosion resistant Aluzink®. The electrical system conforms to established ML Series standards as well as to both harmonised European Standards and to CE marking specifications. |
|
The MLT1400 desiccant dehumidifier is designed to effectively dehumidify high airflow applications using minimal energy. It is equipped with an internally sealed rotor unit. The rotor casing is constructed of durable thermoset plastic and contains isolated sections that provide a precise balance for dehumidification, reactivation, and heat recovery airflows. Its rugged formed metal frame and access panels are produced from corrosion resistant ALUZINK®.
The electrical control system conforms to EN 60204 (IEC204) standards. The electrical components are mounted on busbars and are constructed of halogenfree plastic. The electrical system is designed for up to 690V and 60º C. MLT Series dehumidifiers conform to both harmonised European Standards and to CE marking specifications. |
|
The MLT350 desiccant dehumidifier is designed to efficiently dehumidify in low moisture applications. It is equipped with an internally sealed rotor unit. The rotor casing is constructed of durable thermoset plastic and contains isolated sections that provide a precise balance for dehumidification, reactivation, and heat recovery airflows. Its rugged formed metal frame and access panels are produced from corrosion resistant Aluzink®.
The electrical control system conforms to EN 60204 (IEC204) standards. The electrical components are mounted on busbars and are constructed of halogen-free plastic. The electrical system is designed for up to 690V and 60ºC. MLT Series dehumidifiers conform to both harmonised European Standards and to CE marking specifications. |
|
MLT30 is a newly developed desiccant dehumidifer that comes as standard with a number of functions that are usually considered options. As with all other ML units, MLT30 effectively dehumidifies to a low moisture level.Thanks to its unique design design, the entire air treatment process of the ML series of dehumidifiers occurs in a closed rotor unit with tightly sealing rotor housings made of heat-resistant thermoset plastic.
A high level of regulation accuracy, over 10 design alarm indicators, an operating time design counter and the option of remote control come as standard in the integrated PLC unit with display. |
|
- Entirely automatic Operation.
- Electronic Regulation car-adaptive.
- Digivap® electrodes: production of vapor 1 to 45 kg/h.
- Humidification of the tertiary and industrial buildings. |
|
Type: Gas Fired Steam Humidifier (Isothermic)
Water: All Sources Including Potable, R/O and DI
Capacity: 100, 200 and 400 lbs/hr
Modulation: 25 to 100%
Control Type: On/Off, Modulating, Proportional DDC, Temp.
Tracking to Set Point: ±2%
Efficiency: 89%
Steam Distribution: Duct, AHU, Room, Remote/Room |
|
Type: Electrode Steam Humidifier (Isothermic)
Water: Requires Standard, Potable Water Supply
Capacity: 5 lbs/hr @ 110/1 and 12 lbs/hr @ 230/1
Modulation: 20 to 100%
Control Type: On/Off, Proportional DDC
Tracking to Set Point: ±4%
Efficiency: 94%
Steam Distribution: Duct, AHU, Room |
|
Type: Airless High Pressure Water Atomizing Humidifier (Adiabatic)
Water: R/O and DI
Capacity: Up to 7500 lbs/hr per Cabinet furniture
Modulation: 5 to 100%
Control Type: On/Off, Modulating, Proportional DDC
Tracking to Set Point: ±4%
Configurations: AHU/Duct Manifold or Room |
|
Type: Electrode Steam Humidifier (Isothermic)
Water: Requires Standard, Potable Water Supply
Capacity: 3 - 286 lbs/hr
Modulation: 20 to 100%
Control Type: On/Off, Modulating, Proportional DDC, Temp.
Tracking to Set Point: ±4%
Efficiency: 94%
Steam Distribution: Duct, AHU, Room, Remote/Room |
|
Type: Electric Element Steam Humidifier (Isothermic)
Water: All Sources Including Potable, R/O and DI
Capacity: 0-135 lbs/hr
Modulation: 5 to 100%
Control Type: On/Off, Modulating, Proportional DDC, Temp.
Tracking to Set Point: ±1%
Efficiency: 94%
Steam Distribution: Duct, AHU, Room, Remote/Room |
|
• Humidifier pad is coated with AgIon antimicrobial agent.
• Capable of humidifying the largest area, up to 4,200 sq ft (386 sq m), of any Honeywell flow-through humidifier.
• Interior components designed for quick maintenance and service.
• Option of automatic humidity control or standard humidistat.
• Standard tested per ARI Standard 610. |
|
|
|
Humidifiers, Dehumidifiers
