|
|
SHOP is a modular installation emitter series, which consists of border frames and electrical unit. By the combination variety the planner has to become fair the possibility all photometric requirements in the elevated dwelling and in the Shop and Offivebereich.
The following electrical units are available:
- G 53/QR-LP 111 max. 75W/cardanically stored
- GZ 10/QPAR 111 max. 100W/cardanically stored
- GX 8.5/HIR-CE 111 35/70W/cardanically stored
- G 8.5/HIT TC CE 35/70W/cardanically stored
- 2G 10/TC-F 18W
- System adapters for all OLIGO plug contact emitter and - pendulum-shine (PLUG-IN)
|
|
Lamp: QR111LP 35-50-75-100W
Lamp type : halogen
Lamp base : G53
Light distribution: down
Power supply : 12V
Degree of protection: III
Ip rating : IP20
Material: Verzinkt Steel
Glowtest: yes
Standard: EN60598-1
Fixation: ceiling
Mounting: recessed
Weight: 3,83 kg
|
|
Circular recessed batteries adjustable by cardan system, to suit all lamps here described.
Housing and rings made of stamped steel plate. Downlight designed to combine with lamps available, getting the desired light.
Class II luminaire: CDMR, PAR 30, TC-DEL/TEL, HIPAR 30, MEGAMAN QR-111 and HIT (CDM-T).
Class III luminaire: QR-111 and LED 21W.
Lamp holder included with TC-DEL/TEL compact fluorescent lamp is GX24d/q-3 (26W). For other powers consult us.
|
|
Recessed adjustable (by cardan system) luminaire for up to 3 12V 100W (max.) QR-111 halogen lamps.
Body and rings made of stamped steel sheet.
Luminaire prepared for connection to 12V transformer in accordance with EN 60.742.
Lamp holder G53.
Class III luminaire. |
|
AIXLIGHT MOD 4 QRB111
Reference: 154042
Category: Interior
Site: Ceiling, Wall
Family: Embedded
Range: Aixlight
Source: QRB 111
Power: 4X50w
Test with the incandescent wire: 850° IP: 20 Class: 3
Colors available: Gray money
|
|
Completely adjustable multi-lamp fixtures. The MiniWipp range is created with exactly the same great installation flexibility and use as the MiniWitra series of products, characterised by a double aluminium ring to support the light source. The glazed grey finish of all the parts of the product contribute to increasing still further the lightweight characteristics from an architectural point of view, which makes it suitable for almost all applications.
Light Sources:
Light Source Dichroic Halogen (QR-CB51) with socket GU5,3 (20-35-50W).
Emissions:Direct
Power supply:
12V control gears voltage using an electronic transformer housed in the product. All versions with integrated transformer can be dimmered directly on the primary circuit by using a trailing edge dimmer (IGBT technology).
Body:
The lamp support consists of a double aluminium ring for gyro adjustment. In the recessed versions, the parts of the body are in steel plate. Joints and forks are made in die-cast aluminium.
NOTE: Each fixture in the Miniwitra Range can be transformed into Miniwipp on request; please refer to the Miniwitra Range.
Colours:Glazed grey.
|
|
Scrabble gridlights surface mounted
Decorative multi-lamps surface-mounted luminaires for 2 and 4 halogen reflector Aluline Pro HAL-R111 lamps.
The adjustable cardanic systems offer full freedom for accent lighting in various directions from one unique elegant luminaire.
|
|
|
Recessed modular luminaire with adjustable, cast aluminum spotlights on gimbal mounting. The connection cables of the socket units are pluggable. To change the lamps the gimbal unit can be easily removed. The luminaire is very simple to install and easy to handle. Available in low and high voltage versions. For US contact factory for transformer options.
|
|
design iGuzzini
Deep Surface combines minimal design with years of experience designing multi-lamp fittings. These are highly reliable fittings with the best visual comfort, guaranteed by their positioning, removed from the optical assemblies. Also available: mixed lamp versions.
Ideal for exhibition rooms, malls, and hallways.
|
|
design J. M. Wilmotte
Designed in collaboration with Architect Jean Michel Wilmotte to satisfy the lighting needs of the Art Museum of Forlì, Composit now represents a modular system that is ideal for lighting not only museums but also retail spaces and conference rooms.
This is one unique flexible and customizable product. It is one structural element made of extruded aluminium with two, three, or four optical compartments for accent lighting (downlight), along with a T16 fluorescent tube for general lighting (uplight). Also available: blind covers to customize the system and to favour indirect lighting. The dual orientation of the gyroscope and the mechanical locking mechanism of the aim allow maximum precision and effectiveness for every lighting project.
|
|
KUBIC squared downlight with electromagnetic or electronic control gear
enclosed and separated. Made of injected polycarbonate, interior and exterior frame in white. Equipped for two compact fluorescent lamps.
|
|
With the objective of broadening the Konic range, Lamp launches a spotlight that is smaller than the current one, with a diameter of 165mm and a height of 90mm, ideal for low ceilings and for use in corridors and bathrooms.
All of the models are class II and are available for compact fluorescent lamps of 13, 18, 26 and 32 Watts. The Minikonic models, except for the 32W one, all have integrated electronic ballast. There is also a model to be connected directly of 20W.
Just as with the Konic family, there is a great variety of IP20 and IP54 accessories available in white and grey to meet all technical and decorative requirements.
|
|
Lamp: TC-TE 26-32W
Lamp type : compact fluo
Lamp base : GX24q-3
Light distribution: down
Power supply : 230V-50Hz
Degree of protection: I
Ip rating : IP20
Material: Gegalvaniseerd
Glowtest: yes
Standard: CE - CEBEC
Fixation: ceiling
Mounting: recessed
Weight: 2,14 kg
|
|
Surface downlight for 13W TC-D/DEL and 18W TC-T/TEL
fluorescent compact lamp.
Housing made of stamped steel sheet.
Reflector in metallic aluminium.
The downlight is supplied with ballast and prepared for
connection.
Lamp holder G24d/q-1 (13W).
Lamp holder GX24d/q-2(18W).
Class II luminaire. |
|
Recessed downlight for 13W (max.) TC-D/DEL and 26W
(max.)TC-T/TEL fluorescent compact lamp.
Housing and rings made of stamped steel sheet.
Reflector in specular metalic aluminium.
Decorative protective glass.
Remote auxiliary feeding equipment in metallic box, with
fast connection to the luminaire.
Lamp holder G24d/q-1 (13W), GX24d/q-2 (18W), GX24d/q-
3 (26W).
Class II luminaire. |
|
|
The P-3900 round series of luminaires gives designers total freedom of form and mounting. Whether surface- or pendant-mounted, this fixture creates a ceiling plane guaranteed to enhance the aesthetics of any space. A choice of white or clear prismatic acrylic lenses, as well as T8 or biax lamping are available. The fixture’s housing is one-piece spun steel finished in gloss white polyester powdercoat paint. Standard diameters are two, three and four feet.
|
|
|
CCT FLEX: an innovative range of high performance electronic downlight projectors for compact fluorescent TC-T(EL) and TC-D(EL) lamps. Four different reflectors which can be combined with the whole range of compact fluorescent lamps and accessories. Low luminance optics designed to guarantee maximum visual comfort. Ideal for the lighting of working environments.
|
|
Recessed downlight for 100W (max.) A60
incandescent lamp.
Housing and rings made of stamped steel sheet.
Specular metallic aluminium reflector.
Matt or transparent protective glass.
Lamp holder E27.
Class II luminaire.
|
|
It’s aimable, adjustable, and emits no heat, UV or IR. Illuminators are conveniently remote. Up to 80% energy savings make it the world’s most efficient fiber optic system.
EFO’s array of adjustable down lighting fixtures allow you to redirect lighting each time your work or display space changes.
For consistent light at just the right intensity, EFO offers a variety of fixtures allowing you to customize your fixed down lighting without compromising energy efficiency. |
|
Aqua Round
FDL-40
Lensed machined, under-water fixture with chrome or brass trim face only. Two piece sealed and gasketed construction. Engineered to withstand water pressure to 5 feet. Lens is optically ground glass for flood lighting. Specify acceptance core diameter, lens and finish.
|
|
HEAPS – Marnick Smessaert
Each (interior) architect’s ultimate dream is to be able to create his/her own product in view of a specific project. Heaps offers this opportunity through the choice of different bulb types and a variety of decorative, patterned panels, each time creating a different and unique look. Of course, Marnick has chosen 4 standard prints to get your imagination going.
Type : Ceiling
Measurements / Weight : Heaps 2 : L357 / W200 / H150 / 3,5 kg
Heaps 3 : L523 / W200 / H150 / 5 kg
Heaps 4 : L688 / W200 / H150 / 7 kg
Heap Box 4 : L360/W360/H150/ 7 kg
Lamp Choice : QR111 max 50W or CDM-TM max 35W
Available prints : 4 standard prints or customized
|
|
Down
Down is designed for recessed use in wall and ceiling and because of its multifunctional housing we can offer the luminaire with several lamp options. There are a variety of
possible accessories including dichroic filters, lens and reflectors.
|
|
| Tubular has been designed for rooms that embrace its language of form but do not require an adjustable luminaire head. Tubular is a surface-mounted spotlight that is easy to install, featuring an integrated electronic ballast and a language of form which resembles that of the Xharon projector spotlight. The reflectors, which are easy to replace, are highly efficient and suitable for reflector-free lamps, such as QT12-ax and HIT-TC. All models are equipped with a UV filter, an anti-glare ring as well as a filter holder for two optional filters. Xharon Tubular offers you a versatile tool for your lighting design. |
|
A recessed ceiling downlight with shallow overall depth.
- Casing made of steel sheet, white powder-coated.
- Unit anodised refl ector.
- Equipped with TC-DE energy-saving lamp.
- Connection by choice with connecting terminal or connector
plug.
|
|
Fixed built-in ceiling device, furnished with satin glass diffuser.
Power supply on request.
Anodized aluminium structure.
colour:
anodized aluminium
light source:
halogen
structure:
anodized aluminium
diffuser:
Sanded glass
bulb:
1X75W-100W E27 HAL
dimensions:
width: 25
length: 25
diameter: 16
hole diameter: 17,7
hole depth: 17
|
|
Installation : a touch of light in your kitchen. Setting with springs in a hole of 75mm diameter.
Orientable : angle more and less 30°
Finitions : White, chrom or stainless steel.
|
|
Installation : This 230V spotlight is very easy to install and its light is orientable. Setting with springs in a hole of 90mm diameter.
Orientable : angle 30°
Finitions : White and chrom.
|
|
Lamp: H-PIN 25-40-60W
Lamp type : halogen
Lamp base : G9
Light distribution: down/up
Power supply : 230V-50Hz
Degree of protection: I
Ip rating : IP20
Material: Aluminium
Glowtest: yes
Standard: EN60598-1
Fixation: ceiling
Mounting: surface mounted
Weight: 0,62 kg
|
|
|
|
Architectural lighting : downlights
