|
|
|
This wall lamp keeps the design of its predecessor but with some reduced measurements that makes them ideal for exterior and interior low-level use. Available in direct or indirect light models, with symmetric, asymmetric and parallel reflectors. The energy threshold is from 70 to 150W for metal halide lamps, from 300W for lineal Halogen and 2x32W for compact fluorescent lamps. Manufactured in injected aluminium with grey polyester paint and with a protection classification of IP-65.
|
|
Swiwel wall lamp diffused light in resin, diffuser of polycarbonate, for fluorescent bulb.
colour:
black
silver
white
light source:
fluorescent
structure:
resin
diffuser:
polycarbonate
bulb:
1x2D 21W GR10Q F
dimensions:
width: 26
height: 11
diameter: 22
depth: 30
|
|
Bulk inquiries Only from Architects, Developers and Contractors
Light fitting and sail of cast aluminium
Cover of toughened safety glass (ESG), clear
Light sail adjustable to angles: 0°/15°/30°/45°/60°
Elec.equip.: 1xRX7S, HIT-DE-CE 150W
Enclosure class IP65, rate of protection I
Without lamp
Bracket of galvanised steel, overhanging 420 mm
Colour: Glimmer DB 701
Weight: 26,0 KGS
|
|
Description: Archer Wall Washer
Finish: Sarin Bronze
Glass: Clear
Light: 1 Lt x 5w LED
Voltage: 12v
|
|
Housing and front frame: In diecast aluminium.
Diffuser: In tempered glass, thermal shock and impact resistant.
Reflector: In high-grade die-cut and folded 99.85 aluminium.
Painting: In several stages. First stage: black epoxy cationic electrocoating, resistant to corrosive and saline environments. Second stage: UV-stabilizing primer, and lastly rough finish with graphite acrylic coating.
Lampholder: In polycarbonate, with phosphor bronze contacts (FLC). In ceramics with silver-plated contacts (SAP-E - MBF).
Electric gear: 230V/50Hz supply with thermal protection (except versions FLC/MBF/SBP). Hard wire, cross-section 0.50sqmm (FLC), PVC-HT sheath, or silicone wire terminated with quick-connection admiralty brass clamps; double fibreglass braid insulation. 2P or 2P+T terminal block (maximum allowed lead cross-section: 2.5 sqmm).
Standard supply: When open, the front frame stays attached to the housing by means of safety springs, for easy maintenance.
Equipment: Gasket in environment-friendly material. Waterproof rubber cable gland Ø 1/2 gas thread (cable min. Ø 9 max. Ø 12).
Regulations: Produced according to applicable EN60598-1 CEI 34 - 21 standards, IP65IK07 degree of protection to EN 60529 standards. This product can be installed on normally inflammable surfaces.
|
|
Dimensions:
7 1/4" W 20" H
Large diameter die cast aluminum cylinder, up/down wall mount w/2 lamps.
Marine grade common resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate and extruded aluminum body. Back box included for HID unit, die cast.
|
|
Die cast aluminum exterior wall mount.
Marine grade corrosion resistant heavy walled housing, and lens frame, high pressure die cast aluminum construction. Die cast looking swivel, tilts 12 degrees.
|
|
Die cast and extruded aluminum linear fluorescent wall wash.
Housing is one piece extruded aluminum with cast aluminum ends. Supported by die cast aluminum swivels with locking teeth and 1/2" N.P.T. for mounting with die cast canopies. Available for exterior or interior applications.
|
|
Die cast aluminum up/down wall light interior/exterior.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction. Ballast box is included with all HID lamps.
|
|
Dimensions:
15" W Side View 15" H Bottom View
Die cast aluminum exterior architectural wall or post mount.
Marine grade corrosion resistant heavy walled housing, lens frame and mounting plate, high pressure die cast aluminum construction.
|
|
Dimensions:
5-7/8" W x 10-7/8 H
6" Diameter die cast aluminum downlight surface mount cylinder.
Marine grade corrosion resistant heavy wall high pressure die-cast aluminum construction, with die-cast back mounting plate amd extruded aluminum body.
Available as a downlight wall or pendant.
|
|
Dimensions:
7 1/4" W 13" H
Large diameter die cast aluminum down light surface mount cylinder.
Marine grade corrosion resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate and extruded aluminum body.
|
|
Dimensions:
5 7/8" W 18 1/2" H
6" Diameter die cast aluminum up/down light cylinder
Marine grade corrosion resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate and extruded aluminum body.
|
|
Dimensions:
8 3/4" W 14 1/4" H
9" Die cast aluminum cylinder surface, pendant or wall mount.
Die cast aluminum housing and baffle.
|
|
Dimensions:
18-1/2 W x 7.25 H
Shadow-free ADA half round wall sconce for wet locations.
Heavy gauge aluminum back housing seams are welded and polished, fitted with heavy gauge aluminum bar stock guard. Tamper proof stainless steel fasteners.
|
|
Dimensions:
10" Dia
Exterior die cast architectural bulkhead.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction.
|
|
Dimensions:
9-1/4" W Side View 10-1/2" H Bottom View
Die cast aluminum exterior architectural wall or post mount.
Marine grade corrosion resistant heavy walled housing, lens frame and mounting plate, high pressure die cast aluminum construction.
|
|
Dimensions:
8 3/4" W 20" H
9" Die cast aluminum up/down light cylinder.
Marine grade corrosion resistant heavy wall high pressure die cast aluminum construction, with die cast back mounting plate.
|
|
Exterior architectural semi recessed indirect wall mount.
Corrosion resistant heavy gauge CRS. Die formed and seam welded for solid construction with die cast aluminum integral socket assembly.
|
|
Slimline Wall Pack (SLWP)
HPS / 100 - 400 watts
MH / 175 - 400 watts
PS / 200 - 400 watts
Applications:
Parking facilites, entry ways, perimeter or pathway
lighting, or underpasses.
Features:
Die cast housing with side conduit access
Textured Bronze Finish
Borosilcate molded prismatic glass lens
1/2" threaded apertures for conduit and photo control
Hinged door frame for easy relamping
Lamp Included
|
|
Catalog #:IVT506MH
Description:Wall Mount T6 MH Down
Lamp:IVT506MH - 39/70 T6 Ceramic Metal Halide
Ballast:120 HPF Electronic
Listings:NRTL Wet Location Listed
|
|
As a Dark skies friendly wall mounted down light, Tempo is ideal for applications in commercial public spaces where efficiency, choice of light sources, and various types of light distributions are required. As an up-light version with a flush mount protective lens against falling debris, Tempo can efficiently produce indirect lighting under canopies or create wall washing effects. A standard type III
multi-faceted light assembly, optically engineered for optimum efficiency, is enclosed within a one-piece non-corrosive cast aluminum shell. Maintenance is made easy with a cast aluminum sealed hinged frame retaining a regressed tempered glass lens.
|
|
ECLIPSE W630 series
Eclipse wall mounted luminaire designed for general illumination to enhance building perimeters or accent entrances. This series is complemented with cast louvers or an oblong aluminum shade and offers continuity to the Eclipse post top and bollard family. Optionally, an up light glow is available, or a down light low voltage lamp beam to produce additional creative lighting effects. Up and down light may also be combined to general lighting.
|
|
Many shapes have inspired luminaries, Just like the wheel, triangular shapes have immortalized long gone civilizations. Inspired from the architecture from the great pyramids of Egypt, Keops is designed to blend with modern architecture.
Keops is designed as a complete line of luminaires for wall mount down light or as a pole mount installation.
The ballast tray with a standard type III multi-faceted light assembly, optically engineered for optimum efficiency, is enclosed within a one-piece non-corrosive cast aluminum shell.
As a down light Dark skies friendly, Keops finds a multitude of applications for commercial public spaces where efficiency, and a choice of light sources.
|
|
|
The extraordinary simplicity of the Moove series for interiors, characterised by the stereometric use of sleek lines, is available in the IP65 version conceived to ensure the greatest degree of protection from the elements. Further simplified in order to match the typical characteristics of exterior spotlights, the new Moove IP65 stands out as one of the most compact asymmetrical direct, indirect light fixtures on today's market. The unobtrusive design of the diecast aluminium body and a simple system of rotation enable the fixture to swivel and make it highly flexible, minimising the visual impact on the architecture.
|
|
OptiFlood MVP506
Philips Lighting's long tradition of asymmetric floodlight excellence. The optical system ensures peace of mind for the client by providing an accurately controlled, low obtrusive light installation. OptiFlood floodlights with precisely controlled light distributions can effectively counter light pollution: a total light cut-off above the horizontal and a peak beam intensity at high angles. Accommodates metal-halide lamps for good colour rendering or high-pressure sodium lamps for economical operations.Available with two types of reflectors: asymmetric or road lighting POT optic.
|
|
|
Die-Cast alu minium, cataphoresis treated and powder painted body in colour RAL 9006. 15 mm borosilicate glass cover. A4 stainless steel screws. Fixed to the wall with a special bracket. Also available in black and white. Electric connection by quick clamp.
|
|
|
Extruded aluminium body, cataphoresis treated and powder-painted in grey Coron. Cast aluminium locking rings. A4 stainless steel screws. 5 mm tempered glass cover. Fixed to the wall with a special bracket. Also available in black and white. Versions for other types of lamps are available on request. Electric connection by quick clamp.
|
|
FARO
Wall-mounted luminaire FARO, for 1 x compact lamp 18W with lampholder 2G10, in aluminium, light silver, opal polycarbonate diffusor, protection class I, protection degree IP54, with electronic control gear, B = 160mm, H = 288mm, A = 98mm
|
|
|
|