|
|
The high yields of Scomparva fine Condensing beyond 105% guarantee a great saving respect the traditional boilers, the advanced yield are transformed in fact in saving on the fuel.
Scomparva Condensing is equipped of series of external probe, connecting the sensor to the active boiler the termoregolazione that adapts the temperature of sent of the system according to the external climatic conditions. Also I use it of the termoregolazione, raising the combustion efficiency, contributes to increase to the system effectiveness of heating, increasing the saving and conferring value to the room.
The primary exchanger is realized in stainless steel with coating in plastic that is guarantee of long duration and high resistance to the corrosion.
The burner to premiscelazione total optimizes the air mixture and gas guaranteeing polluting emissions of 20% inferiors regarding the limit of the class 5a, best and most restrictive second European directive EN297. |
|
Scom Parva
Boilers wall them to gas from proceeds
The new boilers wall them ScomPARVA are to passing total, and they do not occupy space because they come outside installed in the obtained niche in a perimetrale wall of the room. Box kit the proceeds, than accommodate to them, are to thread wall and can come intonacato or painted in the same color of the facade, with an esthetic advantage of great relief. The productive distance is controlled second norms ISO 9001:2000 guarantee of absolute quality.
|
|
Scomparva Quick Boiler is the boiler to passing total in the wall that assures the best and faster answer to the modern domestic requirements.
Times of wait reduced to zero, thanks to the reservoir of energy stoccata in the tank the warm water are quickly available reducing the times of attended it wastes and it of cold water.
The sanitary miscelatrice valve allows to easy set up the wished temperature of the sanitary water, maintaining it constant varying of the demands.
The sanitary exchanger Biasi that equips Scomparva Quick Boiler, Anti has a wide surface of exchange, that it allows to work under the threshold of precipitation of the limestone, (through "System Staircases") preventing the formation of the incrustations. |
|
The range from exteriors that Biasi offers with the boilers from proceeds completes with Arctic: the flat boiler from exteriors to high yield (To say Rend. 92/42CEE) and that it satisfies the yields minimums demands from D.Lgs. 311/06.
Arctic is the boiler for heating and the production of warm water sanitary, available in the two versions:
- watertight room from 24 kw
- watertight room from 28 kw.
The compact dimensions (H=975 milimeter; P=250 milimeter; L=520 milimeter) of it useful space facilitates the installation on the balcony earning.
The remote commando, of series, will concur to second command to the boiler personalizing some the operation the various requirements. |
|
Description:
Power: 24kW/30kW according to model
Mode of drainage: Suction cup
Strong points:
A comfort heating to measure:
DUOTWIN CONDENS is delivered with an external probe, which anticipates the variations in the external temperature and adapts the room temperature consequently.
A solution condensation compact and simple to install:
Thanks to its compactness and its 131 cm height only, DUOTWIN CONDENS is posed in all the configurations of installation.
Notable economies:
DUOTWIN CONDENS is conceived to function always with the rightest power and to offer an output higher than that of a boiler low temperature. Duotwin Condens opens right to a tax credit. from 25 to 40%
An exceptional medical comfort:
Its integrated balloon of 80 liters, which associates the principle of instantaneous and of accumulated guarantees: Warm water immediately and whatever the importance of drawings up Of simultaneous drawings up with perfectly stable temperature.
Characteristics:
DUOTWIN CONDENS is built in 2 modules, a module balloon and a module boiler, each one is delivered in an independent parcel. The installation in a cellar is not thus any more one problem.
Probe external of series
|
|
| Long-lasting, hygienic, convenient: Weishaupt has hygienic, powerful and reliable water heaters for all requirements. |
|
Energy becomes more and more precious and expensive. The best
economical use of energy and the reasonable use of regenerative energies with simultaneous increase of comfort and safety is our aim. To meet those requirements
we offer new product solutions and
system concepts.
The new ROTEX gas-condensing-
Units save energy due to its
integrated construction and its
special characteristics concerning
energy consumption, hot water
efficiency, water hygiene and ease
of use.
|
|
| Space-saving and efficient: The new Weishaupt Thermo Condens Kompakt condensing unit has an integral 115 l hot water cylinder. With this tank, the innovative unit provides the hot water convenience of a conventional 200-l unit. Whether in the cellar or in the house - the graceful combination can be installed anywhere, as the simple, elegant design fits perfectly into any environment. |
|
PRESTIGE Evolution 25 kW - 32 kW
Mixed or heating alone or with stainless steel tank 120 l
Modular and scalable, and exceptional performance:
-- High efficiency 95%
-- Very low NOx, well below the maximum allowable rate of Class 5 CE EN 483
-- Burner with optimizing the air / gas mixture
-- Quality hot water exceeds the standards imposed: 3 Stars 2 valves for the mixed boiler and 4 (valves with its tank which can also be on the horizontal)
-- Global regulation "Ecoradiosystem" with automatic radio regulator for 25% energy savings
CE Approval certificate Low Temperature
Chimney and Forced Flue |
|
Electronic with flame ionization (without pilot burner)
Heating modulation
The BTE floor standing boiler is an open-chamber, natural draught boiler. It is equipped with electronic ignition, self-diagnosis and flame ionization control and it is produced in two versions:
BTE for heating and supply of domestic hot water
TE for heating only
|
|
The Vitogas 200-F has true stature - from 72 to 144 kW or as cascade up to 432 kW
The Vitogas 200-F always does well - with a rated output of 72 to 144 kW or as a multi-boiler system up to 432 kW. The standard components of the powerful gas fired cascade are the proven Vitogas 200-F (up to 144 kW), the matching flue gas header and the Vitotronic control unit. This makes the Vitogas 200-F an ideal solution even in larger buildings, where quiet operation and an optimum price/performance ratio are a must.
Your performance gain
Of course, the "large" Vitogas 200-F also offers the whole range of leading technology from Viessmann. These include heating surfaces made from special cast iron, the atmospheric premix burner and the Vitotronic digital control units for operation with modulating boiler water temperature. The Vitogas 200-F ensures high operational reliability, low emissions and low energy consumption. A huge plus as far as the environment and your wallet are concerned
Improved convenience
The stainless steel atmospheric premix burner not only ensures excellent emission values, but also minimum noise levels during its operation and on starting. This is easily explained: The special feature of this burner is its segmentation into several gas fittings. This ensures rapid, even gas distribution and reduces the start-up noise development to a minimum. Even in partial load operation the entire burner area is fired up, ensuring a balanced loading of the burner and the heating surfaces that is kinder on
the materials used. |
|
| Modern, clean, safe: The Weishaupt Thermo Gas combines efficient gas combustion, intelligent electronics and proven boiler technology to produce a heating system with exemplary character. |
|
PRESTIGE Tradition 50 kW Low Temperature
Heating only or with hot water tank UPEC Sol
Prestige's heat exchanger is entirely in copper, so it is fundamentally different from boilers ground iron (copper is almost 10 times more driver than the melting and his weight 2 to 3 times less)
Prestige Tradition enjoys an very flexibility working without inertia.
Product advantages:
-- its electronic board allows it, by simple addition, moving from manual control to the total driving with the mechanism for regulating radio écoradiosystem. Connecting a thermostat can also be wired.
-- His 3-way valve can connect a hot water tank or CESI. |
|
The ROTEX GasSolarUnit uses the free force of the sun not only
for domestic hot water heating, but
also supports effectively the heating
system.
If you are undecided about the use
of solar and may wish to consider it
at a later date, no problem, the solar
support of the ROTEX GasSolarUnit
can be retrofitted . |
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act |
|
Reliable heat storage
We offer you solar storage tanks with capacities ranging from 150 to 750 litres. These are Type S water storage tanks equipped with two heat exchangers, which are used in solar heating systems for supplying domestic hot water.
In order to use the solar heat for space heating as well as providing hot water, so-called combination tanks (type K) are often used in private homes. These have an external buffer storage tank that contains a second, inner storage tank.
Optimum corrosion protection
The storage tanks have a double coating of enamel on the inside for optimum corrosion protection and in addition have a magnesium anode whose performance can be regularly controlled using a push-to-test button.
High solar yields through good layering
The high, slim form facilitates the layering of the heat in the storage tank, leading to higher solar yields. The flow-controlled cold and hot water connections are very effective in preventing turbulent mixing of the layers in the tank.
Low losses through high insulation
To ensure that the heat gained remains in the storage tanks, these are covered with a 100 mm-thick insulation jacket. The covers even have an insulation thickness of 150 to 180 mm (depending on the type of storage). In addition the tanks are equipped with 50 mm-thick floor insulation.
|
|
Type M233, low-pressure steam generator with a steam output of 2.6 to 4.5 t/h (1890 to 3270 kW).
Vitomax 200 is a low pressure steam boiler for a permissible operating pressure of 1 bar steam output: 2.9 to 5.0 t/h. In this output range, the Vitomax 200-LS covers the requirements of all applications demanding low pressure steam or heat, e.g. airconditioning and heating systems, commercial nurseries or other commercial applications. The Vitomax 200-LS is a three-pass boiler with low combustion chamber loading (< 1.2 MW/m³). This creates the ideal conditions for clean combustion with low nitrogen oxide emissions.
The Vitomax 200-LS benefits at a glance:
Three-pass boiler with low combustion chamber loading (< 1.2 MW/m3) - clean combustion with low nitrogen oxide emissions
Low radiation losses through 100 mm thick composite thermal insulation and fully water-cooled reversing chambers
Economical fuel consumption - boiler efficiency: 92 %
Excellent steam quality through large steam chamber, large evaporator and integral steam drier
High operational reliability through excellent natural circulation and safe heat transfer - supplied as standard with robust shipping and installation protection
Easy to service through large boiler door and easy accessibility during maintenance work
Walk-on cover on top of the steam boiler as part of the standard delivery - simplifies installation and maintenance |
|
Hydromotrix Condensation 18/23 and 23/32 kW
Heating alone, mixed (heating + hot water) or with stainless steel tank 120 L
-- Bi-commutable power for more energy savings
-- Up to 109% return,
-- Modulating burner providing very low NOx
-- Automatic control of air / gas mixture over a single adjustment to be done
-- With full automatic control device (delivered with its radio programmer) |
|
Boilers for domestic use
From cast-iron bodies to wall-hung boilers for heating or domestic hot water production. Production started in 1986 and it immediately earned a reputation in Italy and worldwide for its leading-edge technology, quality materials, automation, precision tests, and extensive and reliable service network. Its development continues: the technical design and industrial facility located in the modern Pordenone plant has been certified to ISO 9001:2000. Through the acquisition of the ENI plant, the Biasi Group obtained the support of an important planning, production and marketing activity in the field of gas-fired boilers. The plant in Pordenone produces more than 150,000 boilers per year supplying national and international markets according to the most restrictive rules: strict planning, and rigorous quality control. These experiences enable us to produce an extensive range of boilers that have excellent reliability and can suit any installation need. To complete the range of domestic heating, the smoke tube steel boilers are the flagship of Biasi tradition. Several versions with an extensive output range, from 105 kW, have been produced to satisfy every need: from small homes to large industrial sites. Production of these units is undertaken at Fondver in Verona.
|
|
Niña is the boiler walls them to condensation to watertight room of Emmeti. Compact and sturdy, it is equipped of a special technology that assures an optimal energetic efficiency, in agreement with the European norms on atmosphere and emergency, recording yields till a 109% and economy of exercise that exceeds 30% also with traditional systems to radiators. He is available in seven models, everyone equipping of a system of protector in order to interrupt the contribution of heat in case of insufficient circulation of the heat-transfer fluid.
For the German market, Niña has been certifyd "BLUE ANGEL" from the Institute RAL, second norm RAL UZ 61. |
|
|
|
Gas boilers
