|
|
The ELEACOME range of electric radiating surface systems :
Eléatram is an electric floor heating system used for total or partial heating in private houses, flats and service industries.
Its principle of operation : The floor is heated by a cable at constant power attached to a plastic frame and the combined unit is then laid on an insulating plate in PSE.
Its implementation uses a "wet" solution i.e. under a concrete slab or a fluid screed on which the floor covering will be laid. |
|
A slimming diet for heated flooring !
The ELEACOME range of electric radiating surfaces :
Eléavivre is a low temperature floor heating system suitable for new or existing floors in private housing, apartment blocks and service industries.
Innovation !
ACOME offers a truly innovative product with a heated floor system only 22 mm thick (excluding floor covering), for use with so-called "dry" solutions, i.e. without a concrete slab or liquid screed.
The floor is heated by a round self-regulating cable lying in slots in isolating slabs made in aluminium coated PSE (for improved diffusion and homogenisation of heat). |
|
| Domocâble offers comfort d´une soft and uniform heat and d´un agreeably hot ground without cold zone and circulation to d´air. The temperature of surface of the ground does not exceed 28°C. |
|
| Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height. |
|
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.
The fiberglass mesh backing helps to hold the heating element in place for easy, fault-free installation. It also allows the system to be covered directly by the thinset cement used to lay tile or natural stone flooring.
Full room heating systems generally consist of a single Honeywell heating “roll” of predetermined length. The system is placed in position using the easy-to-follow floor layout diagram provided with each kit, with a pre-attached lead that runs to a thermostat and/or junction box for power. No additional installation wiring is required. |
|
Underfloor heating suitable for fitting around the perimeter of an un-carpeted room which requires high-output heating with a fast response time. Typical applications are garden rooms and galleries, entrance halls, and traditional greenhouses and conservatories.
The heating system uses convectors, set in a duct and covered with grilles and works efficiently off existing central heating without fans or additional pumps. Marston & Langinger offers a design-layout service, and supplies heating convectors, baffles (to improve air circulation), alloy grille-supports, trims, and grilles in various sizes, combinations and patterns. In glass buildings with electric ventilators, a Marston & Langinger automatic controller can be used to operate both the heating and ventilation to give a balanced temperature, whatever the weather outside.
|
|
Vysa-MatTMClassic is our latest design of cable and incorporates PTFE (Teflon), which is far superior to any other material for electric underfloor heating applications, as the insulation material. We now offer a 'lifetime guarantee' as Teflon is virtually indestructible.
The exceptionally small profile of the heating cable makes Vysa-MatTMClassic ideally suited to installation within the adhesive layer - the method preferred by professional floor tilers when laying ceramic tiles.
The ultra thin Vysa-MatTM Classic heating mats rated 100W/m2 to 200W/m2 can easily be fitted directly onto your existing tiled floor without needing remove it. Vysa-MatTM Classic can be installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level. Consequently, there should be no requirement to reduce door heights, raise skirting boards etc.
Vysa-MatTM Classic heating mats rated 100W/m2 are ideal for refurbishment projects where they can be installed onto an existing floor structure
Vysa-MatTM Classic heating mats rated 150W/m2 would be suitable as a primary heating source in well insulated dwellings with a large surface area
Vysa-MatTM Classic heating mats rated 200W/m2 would be suitable as a primary heating source in not so well insulated dwellings with a smaller surface area. They are ideal for conservatories. large hallways and lobbies too - anywhere that you need more heat
According to BS EN 60 335 / IEC 335 Vysa-MatTM Classic 100W/m2 can be used directly on top of timber sub-floors without Vysa-PronTM thermal insulation. Vysa-MatTM Classic heating mats rated 150W/m2 can be used on timber sub-floors but BS EN 60 335 / IEC 335 recommends that the power rating must be confined to 100W/m2 unless you install Vysa-Pron thermal insulation on top of the timber sub-floor.
Normally, Vysa-MatTM Classic heating mats rated 100W/m2 would be chosen to simply provide a warm floor so that you have the comfort of walking on a floor that doesn't feel 'cold'.
Naturally, Vysa-MatTMClassic is a twin conductor design with a single 3 metre long 'cold tail' connections lead (only one connection cable to the thermostat).
Vysa-MatTMClassic is supplied together with a 2 metre length of 10mm flexible conduit for the floor sensor (supplied with the thermostats). We include a (red) bung in one end to prevent adhesive from entering the conduit and sticking to the floor sensor.
For the technically minded, Teflon is non-toxic and has excellent mechanical strength, tear resistance and flexibility. It is fire retardant and completely free from any thermal aging effects. It is completely biocompatible and unaffected by fungus, bacteria or mould growth. It is resistant to all chemicals used in building technology and is unaffected by prolonged exposure to UV radiation, sunlight and moisture.
|
|
The overall size of the Vysa-MatTM Popular heating mats has been optimised so that they closely match the most common room sizes encountered.
Their specification is even superior to most others with an IP 67 rating that protects the heating cables in the event of short-term flooding under 1-m of water!
-Vysa-MatTM Popular heating mats rated 100W/m2 are generally suitable only for floor warming and comfort heating. However, larger areas in well insulated homes are often heated adequately using 100W/m2 - in well insulated Scandanavian houses they only use 80W/m2!
-Vysa-MatTM Popular heating mats rated 160W/m2 can provide primary heating for most medium sized rooms, including conservatories, where sub-floor insulation complies with building regulations
-Vysa-MatTM Popular heating mats rated 200W/m2 can provide primary heating for conservatories and all but the smallest rooms in the house
We do recommend that Vysa-PronTM insulation is installed to reduce energy costs and improve warm up times.
|
|
Radiant tube ZENITH with natural gaz alimentation is for industrial applications (workshop, logistic hall) or city plant (gymnasium, church).
Unit power from 13 KW to 50 KW with associated regulation for thermal tretment of room by zone.
Additional version is proposed with stainless steel reflectors, double skin, dilatation rings and flexible corner for high efficiency application and improvement of the length life. |
|
Equipments suited for all environments with great height (form 4 to 20 meters) or with high thermal dispersion.
It includes a burner unit and a heat exchanger tube which reaches the temperature of 400 ÷ 550 °C., providing a very high radiation efficiency, also by means of the reflecting cover located over the tubes, which focuses the thermal flow downwards.
By means of a centralized equipment control system it is possible to heat only the areas concerned by operations. |
|
| Thermal radiation is the natural alternative to traditional warm- air heating systems. Heat only concentrates in the low part of the building, passing through the air without warming it. Only surfaces are heated, offering a great confort quality. |
|
| The Sabiana Duck Strip radiant panels are produced in 8 different models, with 2 standard colours, and others upon request. Each model features elements measuring 4 and 6 metres in length (3 and 5 metres upon request). Each element can be easily connected by pressfittings or by welding the pipes (in the latter case the pipes are supplied with belled ends to assist coupling and welding). |
|
The Zehnder ZBN radiant ceiling panel provides an efficient, economical and energy saving heating solution, creating a comfortable, uniform distribution of heat. With good regulation and fast heat-up the Zehnder zbn offers long-term durability and unrestricted use of wall and floor space. The panels are especially suited to large spaces as long panel lengths (over 100M) can be achieved. Made from 1.25mm steel, the panels are ideal for sports halls, being able to withstand ball impact. Lights can be integrated into the panels and the panels can be perforated with acoustic insulation to provide sound absorption.
|
|
INNOVATIVE CONSTRUCTIVE FEATURES :
•Tubes Ø22 : Zinc plated steel tube diameter 22 mm, which is the nominal size suitable for all the 22 mm pressfittings;
• Pre-painted panel : Radiant panel in zinc lated pre-painted steel;
• Self-supporting frame : Radiant panel with self-supporting frame to offer the best stiffness;
• Flexible installation :Great flexibility in the installation thanks to coupling points at every 1,5 mt maximun flexibility also using the mobile hookers ;
• Asymmetric manifolds : Asymmetric manifolds with balanced flow for a uniform temperature on the panel.
• Temperature : The maximun temperature of the fluid is up to 200°C. |
|
The Zehnder ZIP radiant ceiling panels are a cost effective, energy saving heating solution, ideal for applications where wall space is at a premium or not available, such as warehouses, workshops, sports halls and so on.
|
|
| The Pulsar ceiling mounted radiant panels a are made in 4 sizes, with a width of 600 mm and a length between 1.2 and 3 m, in 2 standard colours, and others upon request. The panel has a very elegant design, perfectly matching the false ceiling, features simple maintenance, very long life and can be connected in series or in parallel to others panels using flexible pipes supplied upon request. |
|
Plan radiant panels
Plan radiant panels were developed to achieve the best-possible price-performance ratio. More and more builders are now enjoying the benefits of Plan in small to medium-sized buildings.
Fitting it yourself is another cost-saving!
Applications
Radiant panels give off between 60-70% of their heating energy as radiation, the rest heats the air by convection. On meeting surrounding surfaces, people and fixed objects, this radiation is converted into heat energy and is emitted into the air. Zonal heating is easy to achieve in:
sports and leisure centres, indoor tennis halls and indoor riding arenas,
sales rooms, exhibition halls, factories, warehouses,
open areas, like shopping malls, high-bay warehouses, aircraft hangars.
|
|
The Zehnder COMO is a versatile, made to measure, radiant panel/ceiling system for heating and cooling, that is also suitable for installation in false ceilings. The zehnder como is unique and attractive with a strong aesthetic design.
|
|
- Suitable for heating or cooling
-Lightweight, rigid, aluminium construction
- Even, comfortable, temperature distribution.
- Optimum energy efficiency
- Simple and fast installation
- Time saving and cost reducing
- Long and maintenance free operational life
- Many variations of style and finish
- Blends aesthetically with all types of architecture.
- Made to measure and special applications on request
- Thermal-acoustic insulation and cut-outs on request
- No cold draughts
- No unpleasant fan or air movement noise.
- System design service
|
|
To be
electrical radiating ground
System S.R.E is made up of an electrical resistance with enmeshes self-adhesive that facilitates the installation, in addition incorporates an advanced /programador regulator to optimize the power consumption to the maximum. |
|
| Ideal for houses under construction or restoration. The system is supplied in heating mats 2.5m2, 3.5m2 or 5m2 to unroll on the ground. No more problem of placing or fixing pipes. With the recommended levelling compound, a cover of 1.5 cm (pipes included) is sufficient to benefit from the advantages of an under-floor heating system. Moreover, with the "Floor Box", you connect directly the under-floor heating circuit to the traditional central heating circuit. |
|
The CLIMACOME® range of hydraulic radiating surface systems :
Thermacome® is a low temperature warm water system used for total or partial heating and/or cooling in private houses and apartment blocks, in the tertiary sector : offices, factories, schools, hotels, restaurants, churches, etc. and in sports centres : gymnasiums, swimming pools, stadiums, etc.
Its principle of operation is to circulate water through polyethylene tubing (PEX), clipped in place in self-fitting tube guide holders in PSE insulating slabs.
Its implementation uses a "wet" solution i.e. under a concrete slab or a fluid screed on which the floor covering will be laid.
All the components are compliant with the current regulations |
|
A slimming diet for heated flooring !
The CLIMACOME range of hydraulic radiating surface systems:
Vivracome is a low temperature warm water floor heating system suitable for new or existing floors in private houses, apartment blocks and service industries.
Innovation !
ACOME offers a truly innovative product with a heated floor system only 22 mm thick (excluding floor covering), for use with so-called "dry" solutions, i.e. without a concrete slab or liquid screed.
Its principle of operation is to circulate water through polyethylene tubing (PEX) lying in slots in insulating slabs made in aluminium coated PSE (for improved heat diffusion and homogenisation). |
|
ROTEX System 70 permits the combination of radiators and floor heating with only one manifold, one riser pipe and above all one circulation pump. ROTEX System 70 is a low temperature heating system. The max. supply temperature can be up to 82 °C, that means floor heating and radiators can be operated with the same water temperature. The floor heating depends on the temperatures calculated for the radiators.
|
|
| ... products without information |
| |
|
|
Under-floor heating, Ceiling heating
