Lightweight concrete blocks

19 companies | 115 products
Filters
cellular concrete block - ENERGY+

The topic of energy efficiency is becoming increasingly important in the new building
sector. However,...

cellular concrete block / thermal stone / insulated / for weight-bearing exterior walls - PLANBLOCK

Building with Insulating Blocks

Ytong aerated autoclaved concrete is a solid construction material. It is produced ecologically using the raw materials, sand, lime and water with addition of cement and an air entraining agent. The fine pore structure provides optimum thermal insulation. With a Lambda value of up to 0.08 W/mK Ytong insulating...

{{productDetail[55245]}}
insulation block (with expanded silicate coating, for fire protection) - BISOROCKET®

BISOROCKET® the new multi-storey building stone combines the key disciplines of residential housing, such as static, sound insulation, fire protection and thermal insulation in an ingenious way. It allows for construction of up to seven full floors in a monolithic single-skin design without the need for additional exterior insulation and finishing systems.
BISOROCKET® is STRONG:

BISOROCKET®-...

insulating block for single wall construction (lime and expanded silicate) - BISOGREEN®

The new BISOGREEN - Mauerstein-/Putzsystem® combines the healthy living benefits of hydrated lime with the energy benefits of natural expanded silicate ecological through and through. Solid, homogeneous...

insulation block (with expanded silicate coating, for fire protection) - BISOMARK



Leveling blocks are stones used at various heights for height adjustment at the base or on top of the wall. Leveling stones...

insulating block for single wall construction for Passive House (with thin joints) - BISOPLAN

Bisoplan - Passive house standard, without thermal insulation system

A passive house is defined by a heating need of ≤ 15 kWh per m2 per year for residential building. This extremely low value is generally achieved by consuming...

insulating block (with thin joints) - VARIOPLAN

With the Varioplan program Bisotherm provides the economic and insulating supporting shell for multilayered wall constructions. Whether single shell with thermal insulation system or double shells with furring and inter- insulation the Varioplan program provides an efficient solution.

If...

{{productDetail[119353]}}
concrete block with intergrated insulation / for load-bearing walls - 10

The 10″ Durisol Insulated Concrete Form units are 10″ wide (254mm), 12″ (305mm) high and 36″ (915mm) long. There is some variability in the concrete...

concrete block with intergrated insulation / for load-bearing walls - 12

The 12″ Durisol Insulated Concrete Form units are 12″ wide (305mm), 12″ (305mm) high and 24″ (610mm) long. There is some variability in the concrete core and corresponding...

concrete block with intergrated insulation / for load-bearing walls - 14

The 14″ Durisol Insulated Concrete Form units are 14″ wide (356mm), 12″ (305mm) high and 24″ (610mm) long. There is some variability in the concrete core and corresponding insulation values...

concrete block - STANDARD ICF

Far more energy efficient then standard concrete wall forms, standard Durisol wall forms are made entirely from the...

concrete block with intergrated insulation / for load-bearing walls - THERMAL ICF

Thermal Durisol insulated concrete forms (ICF), incorporate mineral fiber (rockwool), insulation that is also non-combustible and moisture resistant. Thermal insulating...

{{productDetail[67116]}}
cellular concrete block / for load-bearing walls - THERMALITE®

Coursing Bricks are autoclaved aerated blocks produced in standard brick sizes for use in bonding and infill to ensure that a uniform thermal...

cellular concrete block / for load-bearing walls - THERMALITE®HI-STRENGTH 10

Hi-Strength 10 has been specifically developed for structural applications such as three or...

cellular concrete block / for partition walls - THERMALITE®HI-STRENGTH 7

Hi-Strength 7 has been specifically designed for applications such as flats of three storeys and above,...

cellular concrete block / for partition walls - THERMALITE®

Paint Grade Smooth is a paint grade block with the clean lines, even surfaces and neat sharp...

cellular concrete block / for partition walls - THERMALITE®PARTY

Party Wall gives very high levels of sound reduction in separating walls between buildings.

Suitable...

{{productDetail[59475]}}
pumice blocks concrete block / insulated - PB30

Solid, strong, thermal and acoustic insulation, fire-proof, non combustible, lightweight, easy to use, 100% natural, ecological, cost-effective,...

pumice blocks concrete block / insulated - 20BC+

Solid, strong, thermal and acoustic insulation, fire-proof, non combustible, lightweight, easy to use, 100% natural, ecological, cost-effective,...

pumice blocks concrete block / insulated - PB20RT+

Solid, strong, thermal and acoustic insulation, fire-proof, non combustible, lightweight, easy to use, 100% natural, ecological, cost-effective,...

pumice blocks concrete block / insulated - 20RT+ / 20BC+ / 30MTH11

Adapted to suit the thickness of the Poncebloc.
Used...

{{productDetail[132139]}}
cellular concrete block / for partition walls - DUROX SUPABLOC

Durox Supabloc are the most versatile aircrete blocks available. These lightwieght...

cellular concrete block / for partition walls - DUROX SUPABLOC 4

Supabloc 4 is extremely versatile, and can be used where just one block type...

cellular concrete block / for load-bearing walls - DUROX SUPABLOC 7

Supabloc 7 is intended for loadbearing applications that specify the use of a 7.3N/mm² building block....

cellular concrete block / for partition walls - DUROX SUPABLOC 10

Supabloc 10 is a high strength aircrete block that can provide good levels of thermal insulation....

cellular concrete block / for foundations - 620 mm | DUROX FOUNDATION

Durox Foundation aircrete blocks are 620mm long and produced specifically for use below DPC in solid walls. They can be used to support cavity, solid or framed construction and provide a number of benefits for below ground work. They are available in strengths of 3.6N/mm² and 7.3N/mm².


Durox Foundation 620 working...

{{productDetail[3100]}}
cellular concrete block / for partition walls - STANDARD GRADE BLOCKS

Celcon Standard grade is extremely versatile and can be used below DPC as infill for Beam and Block flooring systems, as well...

cellular concrete block / for partition walls - SOLAR GRADE BLOCKS

Celcon Blocks Solar Grade is principally used where enhanced thermal performance is required.



With a superior thermal...

cellular concrete block / for foundations - HIGH STRENGTH AND SUPER STRENGTH

H+H's Celcon Blocks High Strength Grade and Super Strength Grade are used principally where higher compressive strengths are required such as in the foundations and lower storeys of...

cellular concrete block / for foundations - PLUS BLOCKS

Celcon Plus Blocks are an alternative to the 440 x 215mm face format block and are suitable for the same applications.



The...

cellular concrete block / for foundations - FOUNDATION BLOCKS

Available in strengths 3.6N/mm² and 7.3N/mm², Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block .

...

{{productDetail[94639]}}
clay and wood block for partitions walls (100% recyclable) - PROCREA®

ProCrea® clay building elements are made of clay and sawdust. They are building biologically certified. To process with a circular saw with a hard metal blade, band saw or a regular saw. Brick...

clay block for partitions walls (100% recyclable) - PROCREA®

ProCrea® Clay Bricks

Unburnt and air dried clay bricks.

Application:...

{{productDetail[59332]}}
light aggregate concrete block / expanded clay aggregate / hollow / concrete - LECABLOCCO ®

Lecablocco is both the trade name of the product and the "quality mark" which only highly qualified manufacturers are entitled to use.
Lecablocco is a small building component made of Leca expanded clay aggregate, used for residential, commercial, industrial, rural and animal-farm buildings.
It is made from selected raw materials and checked by means of stringent laboratory tests.

The...

light aggregate concrete block / expanded clay aggregate / hollow / concrete - LECABLOCCO ®

Paver proposes two types of sound-absorbing blocks for its barriers:
blocks made of wood-concrete;
blocks made of leca-concrete.
Belonging to the leca-concrete family are the Leca Sound Block® block, particularly suitable for absorbing medium...

{{productDetail[126883]}}
cellular concrete block / for load-bearing walls - BETONBLOC®

BETONBLOC®, a building material particularly designed for carcassing and light finishing work, has exceptional properties and qualities whichmake it a product completely suited...

{{productDetail[3359]}}
clay block for partitions walls (100% recyclable) - SUMATEC

Sumatec® blocks are manufactured from clay
Sumatec® extruded earth blocks are unfired blocks and as such should
not be used as an external wall, but are ideal as an internal leaf of certain exterior walls or...

{{productDetail[70036]}}
hemp concrete block - CHANVRIBLOC

CHANVRIBLOC thickness: 10, 15, 20 and 30 cm

new and existing buildings : CHANVRIBLOC is a concrete hemp block for insulation for ecological houses, LEB houseit has been widely used in partitions ans existing rehabilited house; external thermal insulation EIFS (Exterior Insulation and Finishing...

{{productDetail[66004]}}
hemp concrete block - CHANVRIBLOC

Hollow

Hollow Dense concrete blocks are ideal for applications where a durable, lower-weight and high strength wall is required, either above or below dpc. The hollow cores can be filled with...

cellular concrete block - AIRTEC XL

Airtec XL is our lowest weight and thermally best performing block in our entire range possessing a themal conductivity value of only 0.09 W/mK - unique and unrivalled by any other aerated block...

cellular concrete block / with thin joints - AIRTEC PARTY

AIRTEC PARTY WALL 3.6N blocks have been designed to otfer both Ihe superior thermal
performance of Airtec blocks along with a specification...

cellular concrete block / for partition walls - AIRTEC SEVEN

Airtec Seven blocks possess high loadbearing capacity and excellent thermal performance. Perfect for higher-rise applications where thermal insulation and durability are required.

In common with all other...

{{productDetail[59901]}}
{{productDetail[97606]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation