Wood panels: chipboard, MDF, OSB...

35 companies | 411 products
Filters

EGGER front elements sell themselves thanks to their seamless transition between surface and edging....

EGGER offers EUROLIGHT cuts with completely integrated EUROSPAN frames of 10 65 mm width....

EGGER EUROLIGHT FIN is a lightweight building board with finish-foil coated thin chip surface...

EGGER EUROLIGHT LAM is a sandwich board with a thin, finish-foil coated chip surface layer.

STANDARD...

The surface layer of EUROLIGHT ROH consists of a high-quality EGGER thin chipboard. If required, thin MDF and thin MDF HD can be...

{{productDetail[2346]}}
{{productDetail[67276]}}

WISA-Parquet Veneer is a quality component used as base veneer for three-layer parquets. Rotary-cut veneer is peeled...

WISA-Trans is a multilayer laminated plywood panel with a slip resistant pattern. The product is intended for use as flooring in the transport industry i.e. trucks and trailers,...

WISA-Truck and WISA-Truck Plus are wood based laminated panels with a wire mesh type pattern intended for extra heavy use as truck and trailer...

{{productDetail[65363]}}

SafeWood® non-hychroscopic fire retardant treated wood
SafeWood® offers fire retardant treated timber that contributes to a higher safety level in building. It is protected by an advanced formulation that allows application of products for interior, weather protected applications. The products are free from halogenated compounds. When subjected to fire, the fire retardant ingredients...

SafeWood® Select weather resistant fire retardant treated wood
SafeWood® Select offers fire retardant treated timer for exterior or severe damp situations. It is protected by an advanced polymer based formulation that allows application of finished products in exterior or severe damp situations without the need for further protection. The products are free from halogenated compounds....

{{productDetail[103766]}}
{{productDetail[51783]}}
{{productDetail[58379]}}

Appearances and grades:
Choice of approx. 70 veneers
7 different substrates depending on requirements
Core materials...

Preserving the environment is one of our most important goals. SWL blockboards therefore have the most prestigious certificates.
This...

{{productDetail[108857]}}

These are high-quality base boards that are made of wood chips....

These are high-quality base boards that are made of wood fibres. Very finestructured...

A standard block board is a panel with a solid wood core, which may then be glued and overlaid with a cross grain rotary...

{{productDetail[50449]}}

E1 Novolegno
MDF board suitable for use in dry environments
1E Lesonit
MDF...

E1 Plaxil
MDF board suitable for use in dry environments
1E Plaxil
MDF board suitable for pantographing
SB...

5E Lesonit
CARB certified MDF board...

MDF Idro
Board...

{{productDetail[52836]}}
{{productDetail[65623]}}

A versatile range of panels with different functional layers

Applications: Facings...

A versatile range of panels with different functional layers

Applications: Facings and functional surfaces...

{{productDetail[97158]}}

The ideal solution for building upwards

Cross Laminated Timber panels are renowned for their excellent...

{{productDetail[83614]}}
{{productDetail[60821]}}

Scope
Moisture resistant board with UV lacquer finish on one side for professional concrete formwork.

Description
High density chipboard finished with a shining flush UV lacquer which is especially designed for...

Scope
Melamine-coated moisture resistant board (Extra-WR) for professional concrete formwork.

Description
High-density chipboard with aminoplast film and particularly screwable...

Scope
Unsanded, moisture resistant board with extra hard surface for load-bearing applications in humid conditions.

Description
High-density chipboard with unsanded, hard surface and particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions and also as...

Scope
Tongue and groove waterproof Durélis/Populair® is suitable for laying structural and non-structural floors, also in humid conditions. The panels can also be used in vertical applications.

Description
High-density...

Scope
Moisture-resistant board for load-bearing applications in humid conditions.

Description
High-density chipboard with a fine sanded surface and a particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions, it can be refined with paper, melamine,...

{{productDetail[59421]}}

FireDefender® Mineral Core material fills most of the space in the interior of a door. It is relatively light in density at approximately 32 pounds per cubic foot. It has excellent thermal properties and through-bolting...

Hardboard and Thin MDF for industrial applications
It is good to know when you specify UltraStrate® hardboard, you...

HeartWood™ compostable pen mats are designed for single use in the wean-to-finish stage. Because they are made of wood and are disposable, they provide a
Heartwood Pen Matscomfortable...

Details

Span and exposure rated sheathing
Provides dimensional stability...

Blue Ribbon® oriented strand board (OSB)
sub-floor is an engineered wood
structural panel used in flooring applications.

The product is...

{{productDetail[61709]}}

3-bay board for room-side cladding in timber construction

PAVAPLAN 3-F boards are employed on the room side as reinforcing cladding for timber frame constructions. The CE marking HB.HLA2 in accordance...

{{productDetail[80154]}}

The ongoing issue of hard - to - treat walls in the UK can be overcome utilising Spacetherm - an ultra - thin insulation for thermal upgrades, saving valuable space without altering the exterior fabric...

{{productDetail[99172]}}

Medite Ecologique is an MDF panel with Zero added Formaldehyde. Developed specifically for use in environmentally sensitive interior applications, where formaldehyde emissions need to...

Medite Exterior is an MDF panel developed specifically for use in a wide range of external applications in accordance with MDF-H2 as defined in EN 622 part 5 and gives all the design freedom of Standard MDF.Medite Exterior is available in a range...

Medite MR is a moisture resistant MDF panel designed for use in humid conditions in accordance with MDF.H1 as defined in EN 622 part 5, so is ideal for applications such as kitchen and bathroom...

Medite FR Euro Class B and C is an MDF panel developed specifically for use in situations where a Euro Class B or a Euro Class C flame retardant board is required under building regulations.

Medite...

Medite Trade MDF is a general, purpose MDF suitable for most on site applications, for more demanding applications choose Medite...

{{productDetail[67889]}}

Engineered specifically for subflooring applications, LP® TopNotch® Sub-Flooring delivers the strength and moisture resistance you need at a price you...

LP® SolidStart® LSL can help reduce labor and material costs, as well as the risk of callbacks. It can be used for a...

LP Building Products pioneered oriented strand technology more than 35 years ago, and...

LP® FlameBlock® Fire-Rated OSB Sheathing offers you the best of both worldsimpressive structural strength and remarkable burn-through fire resistance. Created by applying a patented, non-combustible Pyrotite® coating...

LP® LongLength™ OSB Sheathing is a line of extended length OSB panels engineered specifically...

{{productDetail[70058]}}

O.S.B. is a product which can be used in various ways. Its usage is without difficulty, but as with all timber derived...

{{productDetail[57858]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation