|
|
Thermalite Trenchblock is a tried and tested, economial alternative to the construction of cavity walls with concrete infill, for foundations.
-For use in soils of up to Design Sulfate Class DS 4
- Available with tongue and groove joints and handholds
- Improves thermal performance
|
|
|
Dense concrete blocks which can be used in virtually any part of a project,above or below ground, in normal conditions. Their performance makes them especially applicable to multi-story applications or partition and separating walls where good sound insulating qualities and high strengths are required.
|
|
Topcrete Foundation
Topcrete Foundation are produced specifically for use below DPC in solid walls. It replaces the inner and outer leaf, wall ties and concrete cavity fill associated with traditional construction methods. This means that construction time may be halved compared to cavity walling and that the wall becomes stable soon after laying, eliminating the risk of collapsed cavities. They are formed with recessed grooves in each short edge to facilitate lifting.
|
|
Hemelite Foundation
Hemelite Foundation are produced specifically for use below DPC in solid walls. It replaces the inner and outer leaf, wall ties and concrete cavity fill associated with traditional construction methods. Construction time may be halved compared to cavity walling and the foundation walls become stable soon after laying allowing the early start of above groundwork. Hemelite Foundation blocks are formed with recessed grooves in each short edge to facilitate lifting. The blocks can be laid in either direction giving a wall width of 255mm, 290mm or 300mm.
|
|
|
The 805T serves two purposes. First, it is used with corners to provide proper bonding for 810T units. By placing one 805T beside a corner unit on each course, the need for sawing at corners is eliminated (for walls with one outside corner), efficiency is increased, and installation costs are reduced. Secondly, the 805T is used to maintain bond throughout a radius (without sawing).
|
|
|
EverLoc™ Retaining Walls are also available without the dress joint! The Full Series offers a more conventional appearance while maintaining the key features EverLoc™ is known for. This unit can be used by itself or mixed with the Traditional Series to increase the randomness of your EverLoc™ Wall.
|
|
|
The 810T is the original EverLoc™! It is a lightweight, one-square foot unit giving EverLoc™ its unique appearance. The unit has an off-set dress joint creating a multi-size or random effect. Radius edges on three sides give EverLoc™ a softer, tumbled look while allowing for aesthetically pleasing inside and outside radius walls. A unique lug and groove locking mechanism makes EverLoc™ one of the most user-friendly srw's on the market today. The locking mechanism, also, prevents the units from opening throughout radius walls to expose aggregate. 810T's can be used by themselves or mixed with 810F's. Simply mixing both styles increases randomness by introducing a third size
|
|
|
Reduced unit weight for ease of handling. Can be used to construct steel %u2013 reinforced walls, to resist lateral loading, available in either open or closed textured, giving an option of surfaces.
|
|
|
E. Dillon’s Ground Series continues to be a popular product in our Premier Line™. We custom manufacture all Ground Series’ orders from your choice of 27 standard colors. Our Product Development Team is always ready to discuss custom colors or shapes as required by the design professional. Call on us to help with your special needs.
|
|
The finest in architectural concrete masonry!
A highly polished reflective finish that is unsurpassed in the industry. Without giving up the economic value of concrete masonry, you can attain the look and durability of polished granite at about half the cost. Our superior materials and aggregates insure structural integrity and durability. We custom manufacture all orders from your choice of 24 standard colors. All Reflective units are manufactured with Easy Trowel Factory Finished Edges.
|
|
|
E. Dillon’s Split Series differs significantly from what is generally available in the market. The difference is our Split units “hold the plane”, a uniformity that gives your building a much more refined look. Our Matte Series’ superior materials and mix designs give our product a very tight texture that is a cut above what is typically available. A large inventory of molds and specialized equipment provide the designer with a wide selection of shapes and sizes including our Majestic™ units. Our Split and Matte Series are available for custom orders in 27 standard colors and we are always available to discuss custom colors as required.
|
|
|
Can be used in a variety of internal & external applications, including above and below the ground or where strength and durability are prime considerations. Typically used in cavity or solid wall constructions, also ideal for use in internal load bearing walls.
|
|
|
A clean, crisp appearance which enhances the shape and design of a building, highlighting its angles and features. Available in Solid, Cellular and Hollow.
|
|
|
Can be used in a variety of internal & external applications, including above and below the ground or where strength and durability are prime considerations. Typically used in cavity or solid wall constructions, also ideal for use in internal load bearing walls.
|
|
|
Designed to be used for all types of construction above and below the ground in conjunction with dense and medium dense aggregate blocks. Reduces the need for cutting blocks onsite, in return reducing waste, cost and time.
|
|
|
Reduced unit weight for ease of handling, available either open textured to provide an excellent medium for surface finishes or close texture for painting.
|
|
|
E. Dillon’s Ground Series continues to be a popular product in our Premier Line™. We custom manufacture all Ground Series’ orders from your choice of 27 standard colors. Our Product Development Team is always ready to discuss custom colors or shapes as required by the design professional. Call on us to help with your special needs.
|
|
Topcrete Paint Quality
These blocks are ideal for commercial, industrial and leisure buildings (external and internal walls) because you can paint directly into them. They're robust and durable, while offering excellent fire and sound insulation, and good standards of airtightness. Colour and texture vary according to which factory produces them, so please ask for samples
|
|
Topcrete Standard
These dense blocks are perfect for building walls above and below ground, as well as for beam and block floor systems. Topcrete Standard is suitable for the construction of separating walls in dwellings including specifications that conform to Robust Details E-WM-1 and E-WM-3. They're really durable and have excellent loadbearing and sound insulation properties, as well as low movement characteristics. They are ideal for finishing with render, cladding, plaster and drylining.
|
|
Medium density block suitable for use in the majority of standard applications. Their performance makes them eminently suitable for general load bearing conditions, good sound insulating qualities, internal partitions and where ease of handling and weight are of importance
Evalite standardblocks are not intended to be left fair-faced or painted. They are a function block which should have a finish (plaster, render, plasterboard, cladding, etc.) applied where the wall is to have visual importance.
|
|
Topcrete RPW
Our solid RPW (Residential Party Wall) blocks build slender separating walls in residential buildings and can carry high loadings over multiple storeys. Walls can be built 190mm thick: a 12% space saving on conventional solid masonry and even greater on cavity walls. They offer an alternative 'slim line solution' to established sizes of cavity and solid separating walls.
|
|
The finest in architectural concrete masonry!
A highly polished reflective finish that is unsurpassed in the industry. Without giving up the economic value of concrete masonry, you can attain the look and durability of polished granite at about half the cost. Our superior materials and aggregates insure structural integrity and durability. We custom manufacture all orders from your choice of 24 standard colors. All Reflective units are manufactured with Easy Trowel Factory Finished Edges.
|
|
|
E. Dillon’s Split Series differs significantly from what is generally available in the market. The difference is our Split units “hold the plane”, a uniformity that gives your building a much more refined look. Our Matte Series’ superior materials and mix designs give our product a very tight texture that is a cut above what is typically available. A large inventory of molds and specialized equipment provide the designer with a wide selection of shapes and sizes including our Majestic™ units. Our Split and Matte Series are available for custom orders in 27 standard colors and we are always available to discuss custom colors as required.
|
|
The finest in architectural concrete masonry!
A highly polished reflective finish that is unsurpassed in the industry. Without giving up the economic value of concrete masonry, you can attain the look and durability of polished granite at about half the cost. Our superior materials and aggregates insure structural integrity and durability. We custom manufacture all orders from your choice of 24 standard colors. All Reflective units are manufactured with Easy Trowel Factory Finished Edges.
|
|
|
Lightweight blocks designed to meet the requirements of the manual handling regulations. The open textured finish provides an excellent medium for surface finishes and fixings, as well as demonstrating a high level of thermal resistance.
|
|
|
|
Concrete blocks
